1955

RH / 1955-57 CHEVY DOOR WINDOW REGULATOR (2 door hardtop & convertible)

REPRODUCTION OF THE ORIGINAL. INCLUDES COMPLETE REGULATOR WITH NYLON ROLLERS & SPRINGS.FITS: 1955-57 CHEVY

LH / 1955-57 CHEVY DOOR WINDOW REGULATOR (2 door hardtop & convertible)

REPRODUCTION OF THE ORIGINAL. INCLUDES COMPLETE REGULATOR WITH NYLON ROLLERS & SPRINGS.FITS: 1955-57 CHEVY

1955-57 CHEVY CONVERTIBLE REAR DECK FILLER PANEL

REPRODUCTION OF THE ORIGINAL.FITS: 1955-57 CHEVY CONVERTIBLE

RH / 1955 CHEVY CONVERTIBLE OUTER WHEELHOUSE (with rear extension)

NEW REPRODUCTION OF THE ORIGINAL.FITS: 1955 CHEVY

LH / 1955 CHEVY CONVERTIBLE OUTER WHEELHOUSE (with rear extension)

NEW REPRODUCTION OF THE ORIGINAL.FITS: 1955 CHEVY

RH / 1955-57 CHEVY CONVERTIBLE TOP MOUNT BOX BRACE ASSEMBLY

ATTACHES TO THE REAR INNER QUARTER AND FLOOR TO PROVIDE REAR MOUNTING POINTS FOR THE CONVERTIBLE TOP FRAME ASSEMBLY. INCLUDES CORRECT "SKID" PLATE FOR MOUNTING REAR TOP ADJUSTER ARM.FITS: 1955-1957 CHEVY CONVERTIBLE

LH / 1955-57 CHEVY CONVERTIBLE TOP MOUNT BOX BRACE ASSEMBLY

ATTACHES TO THE REAR INNER QUARTER AND FLOOR TO PROVIDE REAR MOUNTING POINTS FOR THE CONVERTIBLE TOP FRAME ASSEMBLY. INCLUDES CORRECT "SKID" PLATE FOR MOUNTING REAR TOP ADJUSTER ARM.FITS: 1955-1957 CHEVY CONVERTIBLE

1955-57 CHEVY REAR PACKAGE TRAY / DECK FILLER PANEL (2 door hardtop)

REPRODUCTION OF THE ORIGINAL. INCLUDES SUPPORTING UNDER STRUCTURE & REAR GLASS OPENING. SURFACE REQUIRES PART# CI-55M REAR GLASS CHANNEL FLANGE.FITS: 1955-57 CHEVY 2 DOOR HARDTOP

RH / 1955 CHEVY TAIL PAN TO QUARTER PANEL SECTION

COVERAGE:TAIL PANEL REAR SIDE WEATHERSTRIP CHANNEL SECTION AND AROUND HALF OF THE TAIL LAMP.FITS: 1955 CHEVY ALL 2 DOOR MODELS

LH / 1955 CHEVY TAIL PAN TO QUARTER PANEL SECTION

COVERAGE:TAIL PANEL REAR SIDE WEATHERSTRIP CHANNEL SECTION AND AROUND HALF OF THE TAIL LAMP.FITS: 1955 CHEVY ALL 2 DOOR MODELS

1955-57 CHEVY REAR BODY PANEL / TAIL PANEL

DIE FORMED AND EDP COATED, 46 IN. LONG X 5.25 IN. TALLFITS: 55-57 CHEVY HARDTOP, CONVERTIBLE, SEDAN(EXCEPT NOMAD, WAGON, SEDAN DELIVERY)

1955-57 CHEVY 1 PIECE TRUNK FLOOR-CONVERTIBLE

SHIPS TRUCK FREIGHT, DIE FORMED AND EDP COATED. BRACES AND SPARE TIRE WELL INCLUDED. INCLUDES GAS TANK STRAPSFITS: 1955-1957 CHEVY CONVERTIBLE

1955-57 CHEVY 1 PC TRUNK FLOOR-W/O WELL W/BRACES

SHIPS TRUCK FREIGHT, DIE FORMED AND EDP COATED. BRACES INCLUDED AND SPARE TIRE WELL COVERED FLAT. INCLUDES GAS TANK STRAPSFITS: 1955-1957 CHEVY HARDTOP/SEDAN

1955-57 CHEVY TRUNK FLOOR-WITH WELL/BRACES

SHIPS TRUCK FREIGHTDIE FORMED AND EDP COATED. BRACES AND SPARETIRE WELL INCLUDED. INCLUDES GAS TANK STRAPSFITS: 1955-1957 CHEVY HARDTOP/SEDAN

1955-57 CHEVY TRUNK FLOOR-PLAIN STYLE

SHIPS TRUCK FREIGHT, DIE FORMED AND EDP COATED. BRACES NOT INCLUDED, AND SPARE TIRE WELL IS COVER FLAT.FITS: 1955-1957 CHEVY HARDTOP/SEDAN

1955 CHEVY RADIATOR CORE SUPPORT TOP BAR

REPRODUCTION OF ORIGINAL FOR V8 OR 6-CYLINDER CARS GREAT FOR REPAIRING CUT OR DAMAGED CORE SUPPORTS, CORRECT "TRI-TAB" END DESIGN.FITS: 1955 CHEVY ALL MODELS

1955 CHEVY V8 CORE SUPPORT

REPRODUCTION OF THE ORIGINAL, RADIATOR MOUNTING FLANGES POINT TO THE REAR MOUNTS A V8 STYLE RADIATOR BEHIND THE CORE SUPPORT TOP BAR.FITS: 1955 CHEVY ALL MODELS

RH / 1955 CHEVY CORE SUPPORT FILLER PANEL

REPRODUCTION OF THE ORIGINALFITS: 1955 CHEVY ALL MODELS

1955 CHEVY CORE SUPPORT FILLER PANEL (sold as a pair)

REPRODUCTION OF THE ORIGINALFITS: 1955 CHEVY ALL MODELS

LH / 1955 CHEVY CORE SUPPORT FILLER PANEL

REPRODUCTION OF THE ORIGINALFITS: 1955 CHEVY ALL MODELS

1955 CHEVY 6-CYLINDER CORE SUPPORT

REPRODUCTION OF THE ORIGINAL, RADIATOR MOUNTING FLANGES POINT TO THE FRONT OF CAR. INSTALLS 6-CYLINDER STYLE RADIATOR IN FRONT OF CORE SUPPORT TOP BAR.FITS: 1955 CHEVY ALL MODELS

1955-57 CHEVY CORE SUPPORT CENTER FILLER PANEL

DIE FORMED AND EDP COATEDFITS: 55-57 CHEVY ALL MODELS

RH / 1955-57 CHEVY DOOR SHELL (2 door sedan)

SHIPS TRUCK FREIGHTCOMPLETE INNER AND OUTER DOOR ASSEMBLY. INCLUDES ALL CORRECT MOUNTING POINTS & HOLES EXCEPT FOR STAINLESS TRIM HOLES.FITS: 1955-1957 CHEVY 2 DOOR SEDAN & 2 DOOR WAGON (except nomad) FITS: 1955-1957 CHEVY SEDAN DELIVERY

LH / 1955-57 CHEVY DOOR SHELL (2 door sedan)

SHIPS TRUCK FREIGHTCOMPLETE INNER AND OUTER DOOR ASSEMBLY. INCLUDES ALL CORRECT MOUNTING POINTS & HOLES EXCEPT FOR STAINLESS TRIM HOLES.FITS: 1955-1957 CHEVY 2 DOOR SEDAN & 2 DOOR WAGON (except nomad) FITS: 1955-1957 CHEVY SEDAN DELIVERY

RH / 1955 & 1957 CHEVY DOOR SHELL (convertible)

SHIPS TRUCK FREIGHTDIE FORMED AND EDP COATED.FITS: 1955-57 CONVERTIBLE*modify lock location for 1956.

LH / 1955 & 1957 CHEVY DOOR SHELL (convertible)

SHIPS TRUCK FREIGHTDIE FORMED AND EDP COATED.FITS: 1955-57 CONVERTIBLE*modify lock location for 1956.

RH / 1955 & 1957 CHEVY DOOR SHELL (2 door hardtop)

SHIPS TRUCK FREIGHTDIE FORMED AND EDP COATED.FITS: 1955 & 1957 2 DOOR HARDTOP

LH / 1955 & 1957 CHEVY DOOR SHELL (2 door hardtop)

SHIPS TRUCK FREIGHTDIE FORMED AND EDP COATED.FITS: 1955 & 1957 2 DOOR HARDTOP

RH / 1955 CHEVY FRONT FENDER-LOWER REAR SECTION

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT.FITS: 1955 CHEVY ALL MODELS

LH / 1955 CHEVY FRONT FENDER-LOWER REAR SECTION

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT.FITS: 1955 CHEVY ALL MODELS

1955-56 CHEVY COMPLETE BOLT-ON TRUNK LID (without emblem holes)

SHIPS TRUCK FREIGHTDIE FORMED AND EDP COATED. WITH KEYHOLE & LICENSE PLATE MOUNTING HOLES.FITS: 1955-56 CHEVY

1955-57 CHEVY TRUNK FLOOR REAR CROSSMEMBER BRACE

NEW REPRODUCTION REAR CROSSMEMBER LOCATED UNDER THE BACK EDGE OF THE TRUNK FLOOR. THIS IS THE LAST LOCATION ON THE CAR FOR MOUNTING THE BODY CUSHIONSFITS: 1955-57 CHEVY ALL MODELS(except nomad & wagon)

RH / 1955-1956 ALL & 1957 CONVERTIBLE CHEVY A-PILLAR FLAT REINFORCEMENT

REPRODUCTION OF THE ORIGINAL. STEEL PART TIES THE BOTTOM OF THE HINGE PILLAR / A-PILLAR TO THE INNER ROCKER. SANDWICHES BETWEEN THE INNER & OUTER ROCKERS AT THE FRONT OF THE ROCKER PANEL.FITS: 1955-1956 CHEVY ALL MODELS FITS: 1957 CHEVY CONVERTIBLE

LH / 1955-1956 ALL & 1957 CONVERTIBLE CHEVY A-PILLAR FLAT REINFORCEMENT

REPRODUCTION OF THE ORIGINAL. STEEL PART TIES THE BOTTOM OF THE HINGE PILLAR / A-PILLAR TO THE INNER ROCKER. SANDWICHES BETWEEN THE INNER & OUTER ROCKERS AT THE FRONT OF THE ROCKER PANEL.FITS: 1955-1956 CHEVY ALL MODELS FITS: 1957 CHEVY CONVERTIBLE

RH / 1955-57 CHEVY FULL OUTER DOOR SKIN (2 door sedan)

SHIPS TRUCK FREIGHTREPRODUCTION OF THE ORIGINAL. COMPLETE OUTER DOOR SKIN WITH "PICTURE FRAME". FITS ALL 2 DOOR SEDANS, 2 DOOR WAGONS (except nomads) AND SEDAN SEDAN DELIVERY. EASILY MODIFIED TO FIT NOMAD WITH REMOVAL OF THE UPPER FRAME.FITS: 1955-1957...

LH / 1955-57 CHEVY FULL OUTER DOOR SKIN (2 door sedan )

SHIPS TRUCK FREIGHTREPRODUCTION OF THE ORIGINAL. COMPLETE OUTER DOOR SKIN WITH "PICTURE FRAME". FITS ALL 2 DOOR SEDANS, 2 DOOR WAGONS (except nomads) AND SEDAN SEDAN DELIVERY. EASILY MODIFIED TO FIT NOMAD WITH REMOVAL OF THE UPPER FRAME.FITS: 1955-1957...

RH / 1955-56 CHEVY A-PILLAR WITH COWL SIDE PANEL (2 door sedan)

NEW REPRODUCTION A-PILLAR WITH OUTER COWL SIDE ASSEMBLED.FITS: ALL 1955-56 2 DOOR SEDANS & 2 DOOR WAGONS*2 door sedan

LH / 1955-56 CHEVY A-PILLAR WITH COWL SIDE PANEL (2 door sedan)

NEW REPRODUCTION A-PILLAR WITH OUTER COWL SIDE ASSEMBLED.FITS: ALL 1955-56 2 DOOR SEDANS & 2 DOOR WAGONS*2 door sedan

RH / 1955-56 CHEVY A-PILLAR WITH COWL SIDE PANEL (except sedan)

REPRODUCTION OF THE ORIGINAL. INCLUDES COMPLETE RIGHT COWL SIDE PANEL, HINGE POCKETS & WINDSHIELD "A" PILLAR. FACTORY-COMPLETE PANEL WELDS TO FIREWALL, TOE PANEL, ROCKER & ROOF AT ORIGINAL SEAMS. FITS: 1955-56 CHEVY 2 door hardtopFITS: 1955-56 CHEVY...

LH / 1955-56 CHEVY A-PILLAR WITH COWL SIDE PANEL (except sedan)

REPRODUCTION OF THE ORIGINAL. INCLUDES COMPLETE LEFT COWL SIDE PANEL, HINGE POCKETS & WINDSHIELD "A" PILLAR. FACTORY-COMPLETE PANEL WELDS TO FIREWALL, TOE PANEL, ROCKER & ROOF AT ORIGINAL SEAMS. FITS: 1955-56 CHEVY 2 door hardtopFITS: 1955-56 CHEVY NOMAD...

RH / 1955-56 CHEVY A-PILLAR WITH COWL SIDE PANEL (convertible)

NEW REPRODUCTION A-PILLAR WITH OUTER COWL SIDE ASSEMBLED.FITS: 1955-56 CHEVY convertible**note: must use 57 interior door jamb light switch

LH / 1955-56 CHEVY A-PILLAR WITH COWL SIDE PANEL (convertible)

NEW REPRODUCTION A-PILLAR WITH OUTER COWL SIDE ASSEMBLED.FITS: 1955-56 CHEVY convertible**note: must use 57 interior door jamb light switch

1955-1957 CHEVY 7 PIECE ROOF TOP STRUCTURE SET (2 & 4 door sedan)

INCLUDES COMPLETE SIDE RAILS INCLUDING REAR DOGLEGS BY THE REAR WINDOW OPENING. CAN ALSO BE USED TO REPAIR 4 DOOR SEDANS.FITS: 1955-1957 CHEVY 2 & 4 DOOR SEDAN

1955-1957 CHEVY ROOF TOP STRUCTURE (2 door hardtop)

SHIPS TRUCK FREIGHTREPRODUCTION OF THE ORIGINAL. FULLY ASSEMBLE AND FIXTURE WELDED. INCLUDES COMPLETE SIDE RAILS INCLUDING DOGLEGS BY REAR WINDOW OPENING.FITS: 1955-1957 CHEVY 2 DOOR HARDTOP

1955-1957 CHEVY 3 PIECE ROOF TOP STRUCTURE (2 door hardtop)

REPRODUCTION OF THE ORIGINALS.FITS: 1955-1957 CHEVY 2 DOOR HARDTOP

RH / 1955-1957 CHEVY ROOF STEEL DRIP RAIL (2 & 4 door sedan)

DIE FORMED AND EDP COATED. STEEL DRIP USE WHEN REPLACING OR REPAIRING THE ROOF SKIN.FITS: 1955-1957 CHEVY 2 & 4 DOOR SEDAN

LH / 1955-1957 CHEVY ROOF STEEL DRIP RAIL (2 & 4 door sedan)

DIE FORMED AND EDP COATED. STEEL DRIP USE WHEN REPLACING OR REPAIRING THE ROOF SKIN.FITS: 1955-1957 CHEVY 2 & 4 DOOR SEDAN

RH / 1955-1957 CHEVY ROOF DRIP RAIL (2 door hardtop)

DIE FORMED AND EDP COATED.FITS: 1955-1957 CHEVY 2 DOOR HARDTOP

LH / 1955-1957 CHEVY ROOF DRIP RAIL (2 door hardtop)

DIE FORMED AND EDP COATEDFITS: 1955-1957 CHEVY 2 DOOR HARDTOP

1955-1957 CHEVY OUTER ROOF SKIN (2 & 4 door sedan)

SHIPS TRUCK FREIGHTNEW REPRODUCTION OF THE ORIGINAL. FOR ALL 2 & 4 DOOR SEDANS.FITS: 1955-1957 CHEVY 2 & 4 DOOR SEDAN

1955-57 CHEVY OUTER ROOF SKIN (2 door hardtop)

SHIPS TRUCK FREIGHTREPRODUCTION OF THE ORIGINAL. FOR 2 DOOR HARDTOP.FITS: 1955-1957 CHEVY BEL AIR & 210 SPORT COUPES

RH / 1955-57 CHEVY REAR FLOOR TO DOOR JAMB BRACE (convertible)

DIE FORMED AND EDP COATEDFITS: 1955-57 CHEVY CONVERTIBLE