1964-1965

1965 CHEVELLE & ELCAMINO FRONT BUMPER TO GRILLE FILLER

EDP COATED STEEL PANEL THAT FILLS BETWEEN THE FRONT BUMPER AND GRILLEFITS: 1965 CHEVELLE & MALIBUFITS: 1965 ELCAMINO

RH / 1964-65 CHEVELLE & ELCAMINO FRONT FENDER-LOWER REAR SECTION

LOCATED BEHIND THE FRONT TIRE. DIE FORMED 11 IN. HIGH TALLFITS: 1964-65 CHEVELLE / MALIBUFITS: 1964-65 ELCAMINO

LH / 1964-65 CHEVELLE & ELCAMINO FRONT FENDER-LOWER REAR SECTION

LOCATED BEHIND THE FRONT TIRE. DIE FORMED 11 IN. HIGH TALLFITS: 1964-65 CHEVELLE / MALIBUFITS: 1964-65 ELCAMINO

1964-67 CHEVELLE & ELCAMINO LOWER COWL-UPPER SECTION

NEW HEAVY GAUGE REPRODUCTION EXACTLY LIKE ORIGINAL.

1964-1965 CHEVELLE & MAILBU DECK LID FILLER PANEL (2 door hardtop)

INCLUDES INNER SUPPORT.FITS: 1964-1965 CHEVELLE & MALIBU

RH / 1964-1967 GM A-BODY EXTENDED TOEBOARD (also 1964-72 elcamino)

DIE STAMPED PANEL WILL MEET THE FACTORY SEAM IN FRONT OF THE GAS PEDAL AND RISE 11 INCHES UP THE FIREWALL.WHEN LH & RH ARE USED THEY WILL MEET IN THE CENTER OF THE TUNNEL.FITS: 1964-1967 CHEVELLEFITS: 1964-1967 CUTLASSFITS: 1964-1967 ELCAMINOFITS:...

LH / 1964-1967 GM A-BODY EXTENDED TOEBOARD (also 1964-72 elcamino)

DIE STAMPED PANEL WILL MEET THE FACTORY SEAM IN FRONT OF THE GAS PEDAL AND RISE 11 INCHES UP THE FIREWALL.WHEN LH & RH ARE USED THEY WILL MEET IN THE CENTER OF THE TUNNEL.FITS: 1964-1967 CHEVELLEFITS: 1964-1967 CUTLASSFITS: 1964-1967 ELCAMINOFITS:...

RH / 1964-67 GM A-BODY & 1964-72 ELCAMINO FULL LENGTH FLOOR PAN

SHIPS TRUCK FREIGHTTHIS FLOOR PAN WILL COVER FROM THE GAS PEDAL TO THE REAR SEAT.YOU GET 8 INCHES OF TOEBOARD AND SPLITS DOWN THE CENTER OF THE TUNNEL. IMPORTFITS: 1964-67 CHEVELLEFITS: 1964-72 ELCAMINOFITS: 1964-67 GTO-LEMANS-TEMPESTFITS: 1964-67...

LH / 1964-67 GM A-BODY & 1964-72 ELCAMINO FULL LENGTH FLOOR PAN

SHIPS TRUCK FREIGHTTHIS FLOOR PAN WILL COVER FROM THE GAS PEDAL TO THE REAR SEAT.YOU GET 8 INCHES OF TOEBOARD AND SPLITS DOWN THE CENTER OF THE TUNNEL. IMPORTFITS: 1964-67 CHEVELLEFITS: 1964-72 ELCAMINOFITS: 1964-67 GTO-LEMANS-TEMPESTFITS: 1964-67...

1964-67 CHEVELLE GAS TANK BRACE (each)

EXACT REPRODUCTION. 2 REQUIRED PER CARFITS: 1964-67 CHEVELLE & MALIBU

1964-67 CHEVELLE & MALIBU TRUNK FLOOR PATCH (center section)

20 IN. WIDE X 42 IN. LONGFITS: 1964-67 CHEVELLE & MALIBU

1964-67 CHEVELLE & MALIBU TRUNK FLOOR PATCH

23 IN. WIDE X 42 IN. LONGFITS: 1964-67 CHEVELLE & MALIBU

1964-65 CHEVELLE & ELCAMINO BATTERY TRAY

NEW EDP COATED REPRODUCTIONFITS: 1964-65 CHEVELLE/MALIBUFITS: 1964-65 ELCAMINO

1964-1967 GM A-BODY WINDSHIELD CHANNEL BASE

57 IN. WIDE X 2 IN. HIGHDIE FORMED HIGHLY DETAILED, ATTACHES TO UPPER COWL PANEL. AT THE BASED OF THE WINDSHIELD.FITS: 1964-67 CHEVELLE & MALIBUFITS: 1964-67 ELCAMINOFITS: 1964-67 SKYLARK & SPECIALFITS: 1964-67 CUTLASS & F-85FITS: 1964-67...

1964-1967 GM A-BODY UPPER COWL VENT PANEL

WIPER TRANSMISSION HOLES MAY NEED TO BE ALTERED SLIGHTLY FOR PROPER FIT. OVERALL QUALITY IS GOOD.FITS: 1964-67 CHEVELLE & MALIBUFITS: 1964-67 GTO-LEMANS-TEMPESTFITS: 1964-67 SKYLARK-BUICK SPECIAL-GSFITS: 1964-67 F-85-CUTLASS-442-SUPREME

1965 CHEVELLE & MALIBU REPLACEMENT RADIATOR SUPPORT

NEW REPRODUCTIONFITS: 1965 CHEVELLE & MALIBU

1964-65 CHEVELLE COMPLETE TRUNK FLOORINNER ROCKER&BRACKETS

SHIPS TRUCK FREIGHTTRUNK FLOOR IS FULL FACTORY SIZE, AND INCLUDES THE OVER AXLE BRACE, BOTH GAS TANK BRACES, THE 2 REAR BODY MOUNT BRACES, AND THE REAR CROSS RAIL BRACE ATTACHED.FITS: 1964-65 CHEVELLE & MALIBU

1964-1967 CHEVELLE & ELCAMINO LOWER FIREWALL (without a/c)

SHIPS TRUCK FREIGHTOur firewalls are OE style and include all the holes, fasteners, bends and slots of the original. We even matched the OE wrinkles. This is an important part since many other components are attached or related so you can count on our...

1965 CHEVELLE & ELCAMINO CHROME REAR BUMPER

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. All parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. Installation is fast and easy as all parts are designed to be...

1965 CHEVELLE & ELCAMINO CHROME FRONT BUMPER

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. All parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. Installation is fast and easy as all parts are designed to be a...

1964 CHEVELLE & ELCAMINO CHROME REAR BUMPER

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. All parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. Installation is fast and easy as all parts are designed to be...

1964 CHEVELLE & ELCAMINO CHROME FRONT BUMPER

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. All parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. Installation is fast and easy as all parts are designed to be a...

RH / 1965 CHEVELLE & ELCAMINO FRONT FENDER

SHIPS TRUCK FREIGHTFITS: 1965 CHEVELLE & MALIBUFITS: 1965 ELCAMINO

LH / 1965 CHEVELLE & ELCAMINO FRONT FENDER

SHIPS TRUCK FREIGHTFITS: 1965 CHEVELLE & MALIBUFITS: 1965 ELCAMINO

1964-1967 CHEVELLE & MALIBU TRUNK FLOOR REAR CROSSMEMBER

EDP COATED REPRODUCTION. THIS BRACE ATTACHES AT THE BACK EDGE OF THE TRUNK FLOOR ON THE UNDERSIDE OF THE BODY.FITS: 1964-1967 CHEVELLE & MALIBU

1965 CHEVELLE & ELCAMINO FRONT BUMPER BRACKET SET

NEW HEAVY GAUGE REPRODUCTION KIT (4 PIECE SET)FITS: 1965 CHEVELLE/MALIBUFITS: 1965 ELCAMINO

1964-65 CHEVELLE REAR BUMPER BRACKET SET

NEW HEAVY GAUGE REPRODUCTION KIT (5 PIECE SET)FITS: 1964-65 CHEVELLE/MALIBU

1964 CHEVELLE & ELCAMINO FRONT BUMPER BRACKET SET

NEW HEAVY GAUGE REPRODUCTION KIT (4 PIECE SET)FITS: 1964 CHEVELLE/MALIBUFITS: 1964 ELCAMINO

1964-70 GM MODELS TRUNK LID CATCH (see fitment)

THIS TRUNK LID CATCH IS USED ON ALL GM MODELS TO LATCH THE TRUNK LID AND MAKE THE ADJUSTMENT IN THE CATCH. BOLTS TO THE STRIKER SUPPORT.FITS: 1964-70 CHEVELLE & MALIBUFITS: 1964-70 GTO / LEMANS / TEMPESTFITS: 1964-70 CUTLASSFITS: 1964-70 SKYLARK &...

1964-65 CHEVELLE & MALIBU TRUNK LID CATCH MOUNT

ATTACHES TO THE CENTER SECTION OF THE INNER TAIL PANEL.FITS: 1964-65 CHEVELLE & MALIBU*except wagon

RH / 1965 CHEVELLE & MALIBU TAIL LIGHT BUCKET REINFORCEMENT

THESE TAIL LIGHT REINFORCEMENTS ARE INCLUDED IN OUR ASSEMBLY AND TAIL LIGHT POCKETS.FITS: 1965 CHEVELLE & MALIBU*except wagon

LH / 1965 CHEVELLE & MALIBU TAIL LIGHT BUCKET REINFORCEMENT

THESE TAIL LIGHT REINFORCEMENTS ARE INCLUDED IN OUR ASSEMBLY AND TAIL LIGHT POCKETS.FITS: 1965 CHEVELLE & MALIBU*except wagon

RH / 1965 CHEVELLE & MALIBU TAIL PANEL EXTENSION

NEW CORRECT REPRODUCTION TAIL POCKET WITH WEATHERSTRIP GUTTER CHANNEL. INCLUDES TAIL LIGHT BUCKET REINFORCEMENTS ATTACHED.FITS: 1965 CHEVELLE & MALIBU*except wagon

LH / 1965 CHEVELLE & MALIBU TAIL PANEL EXTENSION

NEW CORRECT REPRODUCTION TAIL POCKET WITH WEATHERSTRIP GUTTER CHANNEL. INCLUDES TAIL LIGHT BUCKET REINFORCEMENTS ATTACHED.FITS: 1965 CHEVELLE & MALIBU*except wagon

1965 CHEVELLE & MALIBU COMPLETE TAIL LIGHT PANEL ASSEMBLY

NEW FULL REPLACEMENT TAIL LIGHT PANEL ASSEMBLY FOR A FULL REAR END RESTORATION. INCLUDES TAIL LIGHT EXTENSIONS & REINFORCEMENTS ATTACHED.FITS: 1965 CHEVELLE & MALIBU*except wagon

1964-65 CHEVELLE & MALIBU TAIL PANEL-CENTER SECTION

NEW CORRECT REPRODUCTION OF THE ORIGINAL TAIL PANEL SECTION AND WEATHERSTRIP CHANNEL.FITS: 1964-65 CHEVELLE & MALIBU*except wagon

RH / 1964-1967 GM A-BODY REAR INNER WHEELHOUSE (except convertible)

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...

LH / 1964-1967 GM A-BODY REAR INNER WHEELHOUSE (except convertible)

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...

RH / 1964-1965 CHEVELLE & EL CAMINO OUTER REAR WHEELHOUSE (except convertible)

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1964-1965 CHEVELLE & MALIBUFITS:...

LH / 1964-1965 CHEVELLE & EL CAMINO OUTER REAR WHEELHOUSE (except convertible)

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1964-1965 CHEVELLE & MALIBUFITS:...

RH / 1964-65 CHEVELLE TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1964-65 CHEVELLE TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

RH / 1964-65 CHEVY CHEVELLE REAR QUARTER-UPPER WHEELARCH

DIE FORMED, 13 INCHES HIGH X 29 INCHES LONGFITS: 1964-65 CHEVELLE 2 DOOR HARDTOP AND CONVERTIBLE

LH / 1964-65 CHEVY CHEVELLE REAR QUARTER-UPPER WHEELARCH

DIE FORMED, 13 INCHES HIGH X 29 INCHES LONGFITS: 1964-65 CHEVELLE 2 DOOR HARDTOP AND CONVERTIBLE

GM DOOR HINGE REBUILD KIT (order 1 kit per car)

14 PIECE KIT INCLUDES: (4) PINS, (8) STANDARD BUSHINGS, (2) OVERSIZE BUSHINGS. THIS KIT WILL DO BOTH LH & RH DOORS ON 2 DOOR MODELS.FITS: 1962-79 X-BODYFITS: 1967-69 F-BODYFITS: 1964-67 GM A-BODY

1961 & LATER GM CAR & TRUCK FLOOR PAN PLUG WITHOUT NOTCH

STEEL FLOOR AND TRUNK PLUG, USE AS NEEDEDFITS: 1967-73 CAMARO & FIREBIRDFITS: 1964-72 GM A-BODYFITS: 1961-70 IMPALA / BEL-AIR / BISCAYNE / CAPRICEFITS: 1962-79 NOVA & X-BODY

1964 CHEVELLE & ELCAMINO PARKING LIGHT LENS SET-AMBER

NEW REPRODUCTION LICENSED BY GENERAL MOTORS AND MADE IN THE USA. SOLD AS A 2 PIECE SET.FITS: 1964 CHEVELLEFITS: 1964 ELCAMINO

RH / 1964-67 GM A-BODY TRUNK FLOOR BODY BRACE

TRUNK FLOOR BRACE FOR BODY BUSHING LOCATED AT INNER WHEELHOUSE.FITS: 1964-67 CHEVELLE & MALIBUFITS: 1964-67 BUICK SPECIAL & SKYLARKFITS: 1964-67 CUTLASS, 442 & F-85FITS: 1964-67 GTO-TEMPEST-LEMANS

LH / 1964-67 GM A-BODY TRUNK FLOOR BODY BRACE

TRUNK FLOOR BRACE FOR BODY BUSHING LOCATED AT INNER WHEELHOUSE.FITS: 1964-67 CHEVELLE & MALIBUFITS: 1964-67 BUICK SPECIAL & SKYLARKFITS: 1964-67 CUTLASS, 442 & F-85FITS: 1964-67 GTO-TEMPEST-LEMANS

1964-67 GM A-BODY TRUNK FLOOR BRACE-OVER REAR AXLE

NEW HEAVY GAUGE REPRODUCTION TRUNK FLOOR BODY MOUNT SUPPORT ABOVE THE REAR AXLEFITS: 1964-67 OLDSMOBILE CUTLASSFITS: 1964-67 CHEVY CHEVELLE / MALIBUFITS: 1964-67 BUICK SKYLARKFITS: 1964-67 PONTIAC LEMANS / GTO / TEMPEST

GM A-BODY CAGE MOUNT NUT KIT (12 piece kit)

7/16 COARSE THREAD. KIT INCLUDES 6 NUTS AND 6 CAGES.FITS: 1964-1972 GM A-BODY

1964-67 GM A-BODY UNDER REAR SEAT FLOOR BRACE

REAR FLOOR BRACE,GOES FROM ROCKER PANEL TO ROCKER PANELFITS: 1964-67 GTO / LEMANS / TEMPEST FITS: 1964-67 CHEVELLE & MALIBUFITS: 1964-67 SKYLARK / SPECIALFITS: 1964-67 CUTLASS / F85 / 442FITS: 1964-67 ELCAMINO