1967-1969

RH / 1967-76 DART & 1971-76 SCAMP OE STYLE OUTER ROCKER PANEL

FULL REPLACEMENT FACTORY STYLE OUTER ROCKER PANEL FITS: 1967-76 DART-SWINGERFITS: 1971-76 PLYMOUTH SCAMP

LH / 1967-76 DART & 1971-76 SCAMP OE STYLE OUTER ROCKER PANEL

FULL REPLACEMENT FACTORY STYLE OUTER ROCKER PANELFITS: 1967-76 DART-SWINGERFITS: 1971-76 PLYMOUTH SCAMP

1967-76 DART / 1972-76 SCAMP DRIP RAIL MOLDING SET (2 door hardtop)

NEW REPRODUCTION STAINLESS STEEL (like original) 6 PIECE SET FOR THE UPPER DRIP RAIL AND FRONT LOWER A-PILLAR.FITS: 1967-76 DART & SWINGERFITS: 1972-76 SCAMP*2 door hardtop

1968-1976 DODGE DART / 1971-1976 SCAMP & 1968-1969 BARRACUDA FRONT WINDSHIELD MOLDING (2 door hardtop only)

NEW HEAVY GAUGE STAINLESS STEEL REPRODUCTION 5 PIECE KIT.FITS: 1968-76 DODGE DART & SWINGERFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA ALL*can also be used on 1967 dart & barracuda, but must add 1968-up style clips and screw in studs

1967-76 DODGE & PLYMOUTH A-BODY UNDER REAR SEAT FLOOR PAN

SHIPS TRUCK FREIGHTFits under rear seat area, over the top of the axle housing and connects to the rear of the trunk floor pan. Includes emergency brake, rear seat, rear seat belt, exhaust hanger and pinion snubber brackets welded into place where...

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1967-74 DODGE & PLYMOUTH A-BODY / 1966-70 B-BODY & 1970-74 E-BODY DOOR HINGE REBUILD KIT

INCLUDES: 1 pin 3 1/2 INCHES LONG, 1 pin 2 1/2 INCHES LONG AND 4 STANDARD BUSHINGS.FITS: 1967-74 A-BODYFITS: 1966-70 B-BODYFITS: 1970-74 E-BODY*mopars did not come with bushings so some drilling may be required for installation.

1967-76 DODGE & PLYMOUTH A-BODY BATTERY TRAY

REPRODUCTION BATTERY TRAY.FITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 PLYMOUTH SCAMP

1968-76 DART & VALIANT FRONT WINDSHIELD GASKET (sedan only)

NEW REPRODUCTION GASKET, MUST HAVE ORIGINAL TRIM TO RE-INSTALL NEW GASKET. CORRECT LOCK STRIP IS NOT AVAILABLE.FITS: 1968-76 DART & SWINGERFITS: 1968-76 VALIANT* 2 door sedan & 4 door sedan (with post)

1967 DART & 1967 BARRACUDA FRONT WINDSHEILD REVEAL MOLDING SET (8 piece set)

NEW CORRECT 8 PIECE MYLAR CHROME LOCKING STRIP FOR THE 1967 CAR OWNERS THAT WANT TO KEEP ALL ORIGINAL.THIS CHROME LOCK STRIP CAN ONLY BE USED WITH GASKET MP-1404A.FITS: 1967 BARRACUDA (fastback & notchback)FITS: 1967 DART (2 door hardtop)*will not fit...

1967 DART & 1967 BARRACUDA FRONT WINDSHIELD GASKET

NEW CORRECT GASKET THE 1967 CAR OWNERS THAT WANT TO KEEP ALL ORIGINAL. THIS GASKET REQUIRES THE CHROME MYLAR LOCKING STRIP KIT, MP-1404B.FITS: 1967 BARRACUDA (fastback & notchback)FITS: 1967 DART (2 door hardtop)*will not fit convertible

1968-76 DART / 1971-76 SCAMP & 1968-69 BARRACUDA FRONT WINDSHIELD GASKET (2 door hardtop)

NEW REPRODUCTION GASKET ACCEPTS ORIGINAL AND REPRODUCTION REVEAL MOLDINGS.FITS: 1968-76 DARTFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA (fastback & notchback)FITS: 1971-75 VALIANT*2 door hardtop without post between the door glass and quarter...

1968-69 BARRACUDA & DART CONVERTIBLE WINDSHIELD GASKET

THIS NEW RUBBER GASKET IS DESIGNED TO ACCEPT ORIGINAL AND REPRODUCTION REVEAL MOLDING.FITS: 1968-69 DARTFITS: 1968-69 BARRACUDA* 1967 models used reveal moldings that snap into the gasket. this gasket can be used on 1967 models if the later reveal...

RH / 1967 DODGE DART REAR QUARTER SKIN

SHIPS TRUCK FREIGHT28 IN. HIGH X 86 IN. LONG

LH / 1967 DODGE DART REAR QUARTER SKIN

SHIPS TRUCK FREIGHT28 IN. HIGH X 86 IN. LONG

1967-1976 DODGE DART & 1971-1976 SCAMP DECK FILLER PANEL (2 door hardtop)

FACTORY STYLE PANEL LOCATED BETWEEN THE REAR WINDOW AND TRUNK LIDEDP COATEDFITS: 1967-76 DODGE DART-SWINGER HARDTOPFITS: 1971-76 PLYMOUTH SCAMP

RH / 1967-76 DODGE DART & 1971-76 SCAMP DECK FILLER-INNER/LOWER SUPPORT

DIE FORMED AND EDP COATEDLOCATED IN EACH LOWER CORNER OF THE DECK FILLER.FITS: 1967-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP

LH / 1967-76 DODGE DART & 1971-76 SCAMP DECK FILLER-INNER/LOWER SUPPORT

DIE FORMED AND EDP COATEDLOCATED IN EACH LOWER CORNER OF THE DECK FILLER.FITS: 1967-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP

RH / 1967-1976 DODGE A-BODY FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 11 IN HIGHFITS: 1967-76 DARTFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

LH / 1967-1976 DODGE A-BODY FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 11 IN. HIGHFITS: 1967-76 DARTFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

RH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

LH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

RH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

LH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

RH / 1967-76 DODGE & PLYMOUTH A-BODY REAR LEAF SPRING MOUNT

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

LH / 1967-76 DODGE & PLYMOUTH A-BODY REAR LEAF SPRING MOUNT

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

RH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT SPRING PERCH

NEW HEAVY GAUGE EDP COATED REPRODUCTION AS ORIGINALFITS: 1967-76 DARTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

LH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT SPRING PERCH

NEW HEAVY GAUGE EDP COATED REPRODUCTION AS ORIGINALFITS: 1967-76 DARTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

DODGE & PLYMOUTH ANTENNA GASKET-EACH

APPLICATIONS:67-74 Dodge Dart, 64 330, Polara, 440, 65-70 Charger, 68 Super Bee, 69 Daytona, 70-74 Challenger, 71-74 Swinger, 67-74 Plymouth Valiant, Barracuda, 64 Fury, 65-70- Bevedere, Satellite, 67-70 Gtx, 68-70 Road Runner, 70-74 Duster, Cuda, 71-74...

1966-72 DODGE & PLYMOUTH A / B-BODY QUARTER WINDOW SEAL (pair)

FITS: 1967-69 BARRACUDA (convertible)FITS: 1967-72 DART / SWINGER / SCAMP (2 door hardtop & convertible)FITS: 1966-67 CHARGERFITS: 1966-67 BELVEDERE / SATELLITE / GTX (convertible)FITS: 1968-70 B-BODY (convertible)

MOPAR DOOR AND TRUNK LOCK GASKET SET-3 PCS

APPLICATIONS:66-70 Dodge Dart, 66-70 Plymouth Valiant, 66-69 Barracuda, 70 Duster 70-74 E Body

DODGE & PLYMOUTH DOOR HANDLE GASKETS (4 piece set)

FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER/ GTX / SATELLITE / BELVEDEREFITS: 1967-70 DART & SWINGERFITS: 1967-69 BARRACUDAFITS: 1970 DUSTER

1967-76 DODGE & PLYMOUTH BUMPER BOLT SET (8 bolts)

Don't ruin the look of your restoration by trying to reuse old, rusted hardware that not only looks bad, but could also be a safety hazard. ABS bumper mounting bolts are precision-manufactured from steel with a stainless steel cap.*8 Bolts, 8 Flat...

1967-72 DODGE & PLYMOUTH A-BODY DOOR WEATHERSTRIP

CORRECT CLIPS & ONE MOLDED END WITH STEEL CORE. LH & RHFITS: 1967-72 DARTFITS: 1971-72 DEMONFITS: 1970-72 DUSTERFITS: 1971-72 SCAMPFITS: 1967-69 BARRACUDAFITS: 1967-72 VALIANT*for 2 door models with roll down quarter glass and pop-out models

1968-76 DART SWINGER / 1971-76 SCAMP & 1968-69 BARRACUDA FRONT WINDSHIELD CLIP SET

REPRODUCTION CLIPS FOR ATTACHING THE MOLDINGS THAT SURROUND THE FRONT WINDSHIELD. 23PCS SCREWS INCLUDEDFITS: 1968-76 DODGE DART & SWINGERFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA ALL*2 door hardtop & 2 /4 door sedan

DODGE & PLYMOUTH GAS TANK GROMMET-SEE NOTES FOR FIT

(tank to fill tube)NOT INCLUDED WITH OUR GAS TANKS, THIS GROMMET IS NECESSARY WHENREPLACING YOUR GAS TANK.FITS: 1967-76 A-BODYFITS: 1966-69 B-BODY (except 1970 b-body)FITS: 1971-74 B-BODYFITS: 1965-74 C-BODY(will work for 1963-65 b-body)

1963-76 DODGE & PLYMOUTH A-BODY 3/8" FUEL SENDING UNIT (w/ return line)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel pump sender assemblies meet or exceed the performance of the original equipment they replace.FITS: 1964-69 BARRACUDA FITS: 1963-76 DARTFITS: 1971-76...

1963-76 DODGE & PLYMOUTH A-BODY 5/16" FUEL SENDING UNIT (w/o return line)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel pump sender assemblies meet or exceed the performance of the original equipment they replace.FITS: 1964-69 BARRACUDA FITS: 1963-76 DARTFITS: 1971-76...

1967-69 DODGE & PLYMOUTH A-BODY FUEL FILLER TO TRUNK FLOOR SEAL

NEW CORRECT REPRODUCTION OF THE SEAL USED TO FILL AROUND THE FILLER NECK AT THE BASE OF THE TRUNK FLOOR.FITS: 1967-69 BARRACUDAFITS: 1967-69 DARTFITS: 1967-69 VALIANT

1968-70 DODGE & PLYMOUTH A-BODY GAS TANK W/O EEC

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1968-76 DODGE DART & SCAMP REAR WINDOW GASKET (except dart sport)

THIS NEW RUBBER GASKET IS DESIGNED TO ACCEPT ORIGINAL AND REPRODUCTION REVEAL MOLDING.FITS: 1968-76 DODGE DART SWINGERFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-76 PLYMOUTH VALIANT* 2 door hardtop only ** 1967 models used reveal moldings that snap into the...

1967-76 DODGE & PLYMOUTH A-BODY REAR OF HOOD TO COWL SEAL

NEW MOLDED REPRODUCTION WITH CLIPS. 34 IN. LONG. THIS IS THE RUBBER PIECE WHICH SEALS THE UNDERSIDE OF THE HOOD TO REAR COWL.FITS: 1967-76 DART & SWINGERFITS: 1971-76 SCAMPFITS: 1970-76 DUSTERFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1971-72...

1967-72 DODGE & PLYMOUTH A-BODY ROOFRAIL WEATHERSTRIP (2 door hardtop)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1967-72 DART & SWINGERFITS: 1971-72 PLYMOUTH SCAMP FITS: 1967-69 VALIANT *w/o pop-out quarter window

1967-69 DODGE & PLYMOUTH A-BODY BODY PLUG KIT

KITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR.FITS: 1967-69...

1967-70 DODGE & PLYMOUTH A-BODY BODY BUMPER KIT

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1967-69 DART TAIL PANEL REINFORCEMENT BRACKETS

Mounts to trunk floor and tail light panel.  Also used as a jack bracket.

RH / 1968-69 DODGE DART OUTER TAIL LIGHT MOUNTING PANEL

Includes the area around the tail light assembly and mounts to the trunk gutter, quarter panel and tail light panel.

LH / 1968-69 DODGE DART OUTER TAIL LIGHT MOUNTING PANEL

Includes the area around the tail light assembly and mounts to the trunk gutter, quarter panel and tail light panel.

1967-69 DODGE DART INNER LOWER TAILLIGHT PANEL

Mounts on the backside (inside) of outer tail light panel (900-2067) which runs below the rear deck lid opening and behind the bumper. Often rusted or bent, it's easier to repair both inner and outer panels at the same time.

1967-69 DODGE DART OUTER LOWER TAILLIGHT PANEL

Mounts below the rear deck lid opening and behind the bumper. Sandwiches with the inner tail light panel (900-2067-1) that's on the backside of this piece. Often rusted or bent, it's easier to repair both inner and outer panels at the same time.

RH / 1967-69 DODGE DART TRUNK GUTTER SET (3 piece set)

DIE FORMED AND EDP COATEDINCLUDES UPPER CORNER, CENTER SIDE AND LOWER CORNERFITS: 1967-69 DART & SWINGER*2 door models

LH / 1967-69 DODGE DART TRUNK GUTTER SET (3 piece set)

DIE FORMED AND EDP COATEDINCLUDES UPPER CORNER, CENTER SIDE AND LOWER CORNERFITS: 1967-69 DART & SWINGER*2 door models