1962

1962 CHEVY IMPALA TRUNK WEATHERSTRIP CHANNELS (4 piece set)

SOLD AS KIT ONLY, THESE CHANNELS ATTACH TO THE REAR QUARTER AND REAR BODY PANEL,THE TRUNK RUBBER SEAL ATTACHES HERE.FITS: 1962 CHEVY IMPALANote: Except wagon

1961-64 IMPALA & FULLSIZE CHEVY FRONT FLOOR TO FIREWALL BRACES

LH & RH (pair) THESE BRACES ARE LOCATED DIRECTLY BELOW THE DRIVER & PASSENGER SIDE FRONT FLOOR PAN AND RUN PARALLEL WITH THE FRAME.FITS: 1961-64 IMPALA & FULL SIZE CHEVY

1961-64 IMPALA & FULLSIZE CHEVY COMPLETE REAR FLOOR BRACE

EDP COATED & DIE FORMED THIS IS THE FULL REPLACEMENT BRACE LOCATED DIRECTLY UNDER THE FRONT EDGE OF THE REAR SEAT.FITS: 1961-64 IMPALA & FULLSIZE CHEVY

1961-64 IMPALA & FULLSIZE CHEVY COMPLETE FRONT FLOOR BRACE

EDP COATED & DIE FORMED THIS IS THE FULL REPLACEMENT BRACE LOCATED AT THE FRONT EDGE OF THE FRONT SEAT DRIVER & PASSENGER SIDE.FITS: 1961-64 IMPALA & FULLSIZE CHEVY

RH / 1961-64 IMPALA & FULL SIZE CHEVY REAR WHEEL HOUSE BOX BRACE

DIE FORMED & HEAVY GAUGETHIS BOX BRACE IS LOCATED AT THE REAR WHEEL.FITS: 1961-64 CHEVY IMPALA & FULL SIZE CHEVY*except wagon

LH / 1961-64 IMPALA & FULL SIZE CHEVY REAR WHEEL HOUSE BOX BRACE

DIE FORMED & HEAVY GAUGETHIS BOX BRACE IS LOCATED AT THE REAR WHEEL.FITS: 1961-64 CHEVY IMPALA & FULL SIZE CHEVY*except wagon

1962 IMPALA OUTER COWL VENT GRILLE

REPRODUCTION OUTER COWL PANEL FOR 1961-1964 CHEVY FULLSIZE MODELS. MANUFACTURED TO FACTORY SPECIFICATIONS FEATURING PRE-MADE OPENINGS WHERE NECESSARY AND COATED IN A RUST PREVENTIVE COATINGS.FITS: 1962 IMPALA

1961-1964 IMPALA & FULLSIZE CHEVY UPPER COWL PANEL

REPRODUCTION UPPER COWL PANEL FOR 1961-1964 CHEVY FULLSIZE MODELS. MANUFACTURED TO FACTORY SPECIFICATIONS FEATURING PRE-MADE OPENINGS WHERE NECESSARY AND COATED IN A RUST PREVENTIVE COATINGS.FITS: 1961-1964 IMPALA & FULLSIZE CHEVY

RH / 1962 CHEVY IMPALA STEEL FRONT INNER FENDER

SHIPS TRUCK FREIGHT, EDP COATED FITS: 62 CHEVY IMPALA

LH / 1962 CHEVY IMPALA STEEL FRONT INNER FENDER

SHIPS TRUCK FREIGHT, EDP COATEDFITS: 62 CHEVY IMPALA

1962-63 IMPALA & FULL SIZE CHEVY BATTERY TRAY HOLD DOWN

NEW REPRODUCTION OF THE ORIGINAL.FITS: 1962-63 IMPALA & FULL SIZE CHEVY

1962 CHEVY IMPALA REAR BUMPER GUARDS (sold as a pair)

NEW CHROME REPRODUCTION OF THE ORIGINALS.FITS: 1962 CHEVY IMPALA*except wagons

1962 IMPALA HOOD LATCH SUPPORT

NEW EDP COATED REPRODUCTION ASSEMBLYFITS: 1962 IMPALA

1962 IMPALA & FULL SIZE CHEVY STEEL RADIATOR SUPPORT

NEW REPRODUCTION & EDP COATEDFITS: 1962 IMPALA / BEL AIR  / BISCAYNE

1962 IMPALA & FULL SIZE CHEVY UPPER RADIATOR SUPPORT

REPRODUCTION, EDP COATEDFITS: 1962 CHEVY IMPALAFITS: 1962 FULL SIZE CHEVY

1962 CHEVY IMPALA & FULL SIZE CHEVY COMPLETE LOWER TRUNK FLOOR

SHIPS TRUCK FREIGHTHEAVY GAUGE & EDP COATEDINCLUDES THE 2 GAS TANK BRACKETS WELDED IN PLACE.FITS: 1962 IMPALA & FULL SIZE CHEVY*trunk floor rear cross member sold separate (ci-1769)**except wagon

1961-64 IMPALA & FULL SIZE CHEVY TRUNK FLOOR WELL

HEAVY GAUGE & EDP COATEDTHIS TRUNK FLOOR WELL IS THE CORRECT DROP IN STYLE WITH UPPER FLANGE, INCLUDES CORRECT FUEL TANK BRACKETS (2)FITS: 1961-64 IMPALA & FULL SIZE CHEVY*except wagon**includes 2 & 4 door models

1961-64 IMPALA & FULL SIZE CHEVY COMPLETE CAB FLOOR

SHIPS TRUCK FREIGHTCOMPLETE FLOOR INCLUDES ALL BRACES AND THE UNDER THE REAR SEAT PANEL. ALSO HAS INNER ROCKER PANELS ATTACHED. NO OUTER ROCKERS.FITS: 1961-64 IMPALA & FULL SIZE CHEVY*2 door & 4 door models  ***  ADDITIONAL ...

1961-64 IMPALA SS BUCKET SEAT MOUNTING BRACKETS 4-PIECE SET

NEW REPRODUCTION BRACKET SET FOR BOTH DRIVER & PASSENGER SIDES ARE REQUIRED WHEN REPLACING FLOOR PANELS.FITS: 1961-64 IMPALA SS*bucket seats

1961-64 IMPALA & FULL SIZE CHEVY COMPLETE FRONT FLOOR PANEL

SHIPS TRUCK FREIGHT62.5 IN. WIDE X 65.25 IN. LONGFRONT PASSENGER AREA FLOOR WITHOUT BRACES. BEGINS AT THE FACTORY SEAM OF THE FIREWALL TO THE FRONT EDGE OF THE REAR SEAT.FITS: 1961-64 IMPALA & FULL SIZE CHEVY*2 door & 4 door models

RH / 1961-64 IMPALA & FULL SIZE CHEVY CAB FLOOR HALF

SHIPS TRUCK FREIGHTFITS: 1961-64 IMPALA & FULL SIZE CHEVY*2 door & 4 door models

LH / 1961-64 IMPALA & FULL SIZE CHEVY CAB FLOOR HALF

SHIPS TRUCK FREIGHTFITS: 1961-64 IMPALA & FULL SIZE CHEVY*2 door & 4 door models

1962 CHEVY IMPALA STEEL FRONT BUMPER FILLER

DIE FORMED, EDP COATEDALSO KNOWN AS A STONE SHIELDFITS: 1962 CHEVY IMPALA

1962-63 IMPALA & FULL SIZE CHEVY BATTERY TRAY WITH BRACKET

REPRODUCTION BATTERY TRAYFITS: 1962-63 CHEVY IMPALAFITS: 1962-63 CHEVY BISCAYNEFITS: 1962-63 CHEVY BEL-AIR

RH / 1961-64 IMPALA & FULLSIZE CHEVY FACTORY STYLE ROCKER (2 door hardtop & sedan)

DIE FORMED FACTORY STYLE FULL REPLACEMENT WITH INNER SUPPORT (inner rocker sold separate)FITS: 1961-64 FULL SIZE CHEVY & IMPALA

LH / 1961-64 IMPALA & FULL SIZE CHEVY FACTORY STYLE ROCKER ( 2 door hardtop & sedan)

DIE FORMED FACTORY STYLE FULL REPLACEMENT WITH INNER SUPPORT (inner rocker sold separate)FITS: 1961-64 FULL SIZE CHEVY & IMPALA

1961-64 IMPALA & FULL SIZE CHEVY UPPER TRUNK FLOOR SHELF

SHIPS TRUCK FREIGHTTHIS REPRODUCTION UPPER TRUNK FLOOR PANEL PANELS COVERS THE AREA FROM BEHIND THE REAR SEAT BACK TO THE LOWER TRUNK FLOOR BETWEEN THE WHEELHOUSES. MANUFACTURED IN ORIGINAL GAUGE STEEL DESIGNED FOR AN EXACT REPLACEMENT.FITS: 1961-64...

1961-64 IMPALA & FULL SIZE CHEVY UPPER TRUNK FLOOR BRACE

THIS BRACE IS WELDED TO THE UNDERSIDE OF THE UPPER TRUNK FLOOR VERTICAL WALL. PROVIDING THE UPPER REAR FUEL TANK SUPPORT.SOLD INDIVIDUALLY. FITS BOTH DRIVER AND PASSENGER SIDE. 2 REQUIRED PER VEHICLE.FITS: 1961-64 IMPALA & FULL SIZE CHEVY*except wagon...

RH / 1962 IMPALA & FULL SIZE CHEVY TRUNK FLOOR DROP OFF

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1962 IMPALA & FULL SIZE CHEVY TRUNK FLOOR DROP OFF

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

RH / 1961-64 IMPALA & FULL SIZE CHEVY FRONT CAB FLOOR PAN SECTION

USA MADE & DIE FORMED23 IN. WIDE X 28 IN. LONGFITS: 1961-64 IMPALA & FULL SIZE CHEVY

LH / 1961-64 IMPALA & FULL SIZE CHEVY FRONT CAB FLOOR PAN SECTION

USA MADE & DIE FORMED23 IN. WIDE X 28 IN. LONGFITS: 1961-64 IMPALA & FULL SIZE CHEVY

1964-70 GM MODELS TRUNK LID CATCH (see fitment)

THIS TRUNK LID CATCH IS USED ON ALL GM MODELS TO LATCH THE TRUNK LID AND MAKE THE ADJUSTMENT IN THE CATCH. BOLTS TO THE STRIKER SUPPORT.FITS: 1964-70 CHEVELLE & MALIBUFITS: 1964-70 GTO / LEMANS / TEMPESTFITS: 1964-70 CUTLASSFITS: 1964-70 SKYLARK &...

1961 & LATER GM CAR & TRUCK FLOOR PAN PLUG WITHOUT NOTCH

STEEL FLOOR AND TRUNK PLUG, USE AS NEEDEDFITS: 1967-73 CAMARO & FIREBIRDFITS: 1964-72 GM A-BODYFITS: 1961-70 IMPALA / BEL-AIR / BISCAYNE / CAPRICEFITS: 1962-79 NOVA & X-BODY

GM A-BODY CAGE MOUNT NUT KIT (12 piece kit)

7/16 COARSE THREAD. KIT INCLUDES 6 NUTS AND 6 CAGES.FITS: 1964-1972 GM A-BODY

LH / 1962-64 IMPALA & FULL SIZE CHEVY COMPLETE LOWER DOOR HINGE ASSEMBLY

NEW REPRODUCTION ASSEMBLY. NO CORE REQUIREDFITS: 1962-64 IMPALA & FULL SIZE CHEVY

RH / 1962-64 IMPALA & FULL SIZE CHEVY COMPLETE LOWER DOOR HINGE ASSEMBLY

NEW REPRODUCTION ASSEMBLY. NO CORE REQUIRED.FITS: 1962-64 IMPALA & FULL SIZE CHEVY

1962 CHEVY IMPALA REAR BUMPER (3 piece set)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. All parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. Installation is fast and easy as all parts are designed to be a...

1962 CHEVY IMPALA FRONT BUMPER (3 piece set)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. All parts feature, depending on application, correct-as-original clips, tabs, bends, and seams. Installation is fast and easy as all parts are designed to be a...

1962 IMPALA & FULLSIZE CHEVY HOOD RELEASE ASSEMBLY

NEW CORRECT EDP COATED REPRODUCTION HOOD LATCH ASSEMBLYFITS: 1962 CHEVY IMPALA & FULLSIZE CHEVY

1962-1964 IMPALA & FULL SIZE CHEVY COMPLETE UPPER DOOR HINGE (sold as each)

NEW REPRODUCTION ASSEMBLY. CAB BE USED ON THE DRIVER'S SIDE OR THE PASSENGER'S SIDE.FITS: 1962-1964 IMPALA & FULL SIZE CHEVY

UNIVERSAL STEEL HOOD SCOOP (2 inch rise)

Universal steel hood scoop with a 2" raise. This scoop is can be modified to fit any application. Installation will require cutting the scoop to the desired length and forming the scoop to the curvature of your vehicle's hood. We recommend welding the...

UNIVERSAL STEEL HOOD SCOOP (4 inch rise)

Universal steel hood scoop with a 4" raise. This scoop is can be modified to fit any application. Installation will require cutting the scoop to the desired length and forming the scoop to the curvature of your vehicle's hood. We recommend welding the...