DART

1962-1965 B-BODY BATTERY TRAY W/BRACE

BATTERY TRAY  1962-1965   B-BODY  W/BRACE FITS FOLLOWING 1963 - 1964 Dodge 3301963 - 1964 Dodge 4401965 Dodge Coronet1962 Dodge Dart1962 - 1964 Dodge Polara1962 - 1965 Plymouth Belvedere1962 - 1964 Plymouth Fury1965 Plymouth...

RH/ 1967-76 DODGE & PLYMOUTH A-BODY FRONT FLOOR PAN

DIE STAMPED. STARTS FROM THE FRONT OF THE SEAT TO THE FIREWALL SEAM. 25 IN. WIDE X 27 IN. LONGFITS: 1970-76 DUSTERFITS: 1967-76 DART SWINGERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDA

1970-76 DART & 1971-72 DEMON FRONT OF HOOD TO RADIATOR SUPPORT SEAL

THIS CORRECTLY-FORMED AND SHAPED RUBBER STRIP SEALS THE HOOD TO THE RADIATOR CORE SUPPORT, FORCING AIR THROUGH THE RADIATOR. THIS SEAL INCLUDES MOUNTING CLIPS. 55 1/2 IN. LONGFITS: 1970-76 DARTFITS: 1971-72 DEMON

1973-76 DODGE & PLYMOUTH TRUNK LOCK KIT (see fitment)

REPRODUCTION UNIVERSAL TRUNK LOCK ASSEMBLY. INCLUDES LOCK CYLINDER, 2 KEYS, 5 DIFFERENT LENGTH LOCK RODS, ONE LOCK RETAINER,AND ONE GASKET FOR USE ON A VARIETY OF CARS. SEE FITMENT BELOW.FITS: 1973-74 CHARGERFITS: 1973-74 ROADRUNNER / SATELLITEFITS:...

1966-72 DODGE & PLYMOUTH TRUNK LOCK KIT (see fitment)

UNIVERSAL TRUNK LOCK ASSEMBLY.INCLUDES LOCK CYLINDER, 2 KEYS, 5 DIFFERENT LENGTH LOCK RODS, ONE LOCK RETAINER, AND ONE GASKET FOR USE ON A VARIETY OF CARS. SEE EXACT FITMENT BELOW.FITS: 1968-72 CHARGERFITS: 1966-72 ROADRUNNER / SATELLITE / GTX /...

1968-1969 DODGE DART CHROME REAR BUMPER

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1967-1969 DODGE DART FRONT CHROME BUMPER

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

LH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT FLOOR PAN PATCH

DIE STAMPED. STARTS FROM THE FRONT OF THE SEAT TO THE FIREWALL SEAM. 25 IN. WIDE X 27 IN. LONG FITS: 1970-76 DUSTERFITS: 1967-76 DART SWINGERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDA

RH / 1967-1969 DART TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1967-1969 DART TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

RH / 1970-1976 DART & 1971-1976 SCAMP TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1970-1976 DART & 1971-1976 SCAMP TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

1967-74 DART FRONT & REAR WHEEL OPENING MOLDING SET (4 piece set)

NEW REPRODUCTION STAINLESS STEEL, LIKE ORIGINAL. NEW TOOLING MARCH 2014.FITS: 1967-74 DODGE DART & SWINGER*2 door hardtop & sedan

1967-72 DODGE & PLYMOUTH A-BODY DOOR LOCK PILLAR SEALS (except duster & demon)

NEW REPRODUCTION DOOR JAMB RUBBER SEALS WITH STEEL CORE LIKE ORIGINAL. ALSO KNOWN AS U-JAMB SEALS, SOLD AS A PAIR LH & RH WITHOUT ATTACHING HARDWARE. FITS: 1967-72 DARTFITS: 1971-72 SCAMPFITS: 1967-69 BARRACUDAFITS: 1967-72 VALIANT*2 door hardtop...

RH / 1962-66 DODGE & PLYMOUTH A-BODY REAR FLOOR PAN

DIE FORMED 18 GAUGE STEEL. 24 INCHES LONG FROM THE FRONT OF THE REAR SEAT. THIS REAR FLOOR PAN PATCH IS USA MADE AND DIE STAMPED.EXACT REPRODUCTION FROM A PLYMOUTH BARRACUDA THIS WILL BE SHORT 3 INCHES AT THE BACK EDGE OF THE DART.YOU CAN EITHER TRIM AT...

LH / 1962-66 DODGE & PLYMOUTH A-BODY REAR FLOOR PAN

DIE FORMED 18 GAUGE STEEL. 24 INCHES LONG FROM THE FRONT OF THE REAR SEAT. THIS REAR FLOOR PAN PATCH IS USA MADE AND DIE STAMPED.EXACT REPRODUCTION FROM A PLYMOUTH BARRACUDA THIS WILL BE SHORT 3 INCHES AT THE BACK EDGE OF THE DART.YOU CAN EITHER TRIM AT...

1971-1976 A-BODY & 1972-1993 DODGE TRUCK OUTSIDE DOOR HANDLE SET

NEW REPRODUCTION CHROME OUTSIDE DOOR HANDLE ASSEMBLIES COME COMPLETE WITH CHROME PUSH BUTTONS AND GASKETS. LH & RH (pair)FITS: 1971-1976 DART & SWINGERFITS: 1971-1976 SCAMPFITS: 1971-1972 DEMONFITS: 1971-1976 DUSTERFITS: 1971-1976 VALIANTFITS: 1972-1993...

1967-70 A-BODY & 1968-70 B-BODY CHROME OUTSIDE DOOR HANDLE ASSEMBLY (pair)

NEW REPRODUCTION OUTSIDE DOOR HANDLE ASSEMBLIES COME COMPLETE WITH CHROME PUSH BUTTONS AND GASKETS.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET & SUPERBEEFITS: 1968-70 ROADRUNNER-GTX-SATELLITEFITS: 1967-70 DART & SWINGERFITS: 1967-69 BARRACUDAFITS: 1970...

1963-66 DODGE & PLYMOUTH A-BODY OUTSIDE DOOR HANDLE ASSEMBLY (pair)

NEW CHROME REPRODUCTION OUTSIDE DOOR HANDLE ASSEMBLIES COMPLETE WITH CHROME PUSH BUTTONS AND GASKETS.FITS: 1964-66 BARRACUDAFITS: 1963-66 VALIANTFITS: 1963-66 DART

RH / 1963-66 DART REAR QUARTER-LOWER REAR SECTION

THIS DIE STAMPED PANEL REPAIRS THE AREA BEHIND THE REAR TIRE.40 IN. LONG X 16 IN. HIGHFITS: 1964-66 DART 2 DOOR & 4 DOOR*modify around tail light for all 63 dart models**will not fit wagon models

LH / 1963-66 DART REAR QUARTER-LOWER REAR SECTION

THIS DIE STAMPED PANEL REPAIRS THE AREA BEHIND THE REAR TIRE.40 IN. LONG X 16 IN. HIGHFITS: 1964-66 DART 2 DOOR & 4 DOOR*modify around tail light for all 63 dart models**will not fit wagon models

RH / 1963-66 DART REAR QUARTER-REAR WHEEL ARCH

THIS DIE STAMPED PANEL REPAIRS THE ENTIRE WHEEL OPENING.41 IN. LONG X 22 IN. HIGHFITS: 1963-66 DODGE DART 2 DOOR*will not fit wagon models

LH / 1963-66 DART REAR QUARTER-REAR WHEEL ARCH

THIS DIE STAMPED PANEL REPAIRS THE ENTIRE WHEEL OPENING.41 IN. LONG X 22 IN. HIGHFITS: 1963-66 DODGE DART 2 DOOR*will not fit wagon models

1962-1966 DODGE & PLYMOUTH A-BODY COMPLETE FLOOR PAN KIT-4 PIECES

FOR ALL HARDTOP, SEDAN, CONVERTIBLE 2 & 4 DOOR MODELS INCLUDING WAGONS. FITS: 1963-1966 DARTFITS: 1962-1966 VALIANTFITS: 1964-1966 BARRACUDAFITS: 1962 LANCERNote: When floors are installed there will be a 3 inch gap between front and rear sections...

RH / 1962-66 DODGE & PLYMOUTH A-BODY FRONT FLOOR PAN

DIE FORMED 18 GAUGE STEEL. 30 IN. LONG.FRONT FLOOR PANEL GIVES YOU ABOUT 6 INCHES OF TOEBOARD AND CURLS INTO THE CENTER TUNNEL.THIS PANEL NEEDS 1 1/2 INCHES TRIMMED OFF THE FLANGE ON THE ROCKER SIDE. MUST REUSE EXISTING BRACKETSFITS: 1963-66 DARTFITS:...

LH / 1962-66 DODGE & PLYMOUTH A-BODY FRONT FLOOR PAN

DIE FORMED 18 GAUGE STEEL. 30 IN. LONG.FRONT FLOOR PANEL GIVES YOU ABOUT 6 INCHES OF TOEBOARD AND CURLS INTO THE CENTER TUNNEL.THIS PANEL NEEDS 1 1/2 INCHES TRIMMED OFF THE FLANGE ON THE ROCKER SIDE. MUST REUSE EXISTING BRACKETSFITS: 1963-66 DARTFITS:...

1967-76 DODGE & PLYMOUTH A-BODY DOOR SILL PLATES (sold as a pair)

DIE STAMPED ALUMINUM FLAT FINISH, INCLUDES FASTENERS. ATTACHES TO THE FLOOR WIRE COVER AND HOLDS DOWN THE OUTER EDGE OF THE CARPET IN THE DOOR OPENING.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMPFITS: 1971-72 DODGE...

1967-76 DODGE & PLYMOUTH A-BODY FOUR SPEED SHIFTER TUNNEL

FOR MODELS WITH OR WITHOUT CONSOLE. PRE-DRILLED HOLES FOR SHIFTER BOOT AND BEZEL.FITS: 1967-76 DART & DART SPORTFITS: 1970-76 DUSTERFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMPFITS: 1973-76 DODGE DART SPORTFITS: 1971-72 DODGE DEMON

1970-72 DART & 1971-72 DEMON FRONT STEEL VALANCE

Auto Metal Direct front valances are a great choice for your next muscle car restoration project! Constructed from durable steel, these valances are EDP coated for rust resistance. Auto Metal Direct front valances are direct replacements for the stock...

1967-1976 DODGE & PLYMOUTH UPPER COWL PLENUM

NEW EDP COATED REPRODUCTION UPPER COWL PLENUM. ATTACHES BELOW THE UPPER COWL VENT PANEL.FITS: 1967-1976 DART FITS: 1967-1976 DART SPORTFITS: 1967-1969 BARRACUDAFITS: 1971-1976 SCAMPFITS: 1967-1976 VALIANT

1967-1976 DODGE & PLYMOUTH UPPER COWL VENT PANEL

NEW EDP COATED REPRODUCTION UPPER COWL PANEL.FITS: 1967-1976 DART FITS: 1967-1976 DART SPORTFITS: 1967-1969 BARRACUDAFITS: 1971-1976 SCAMPFITS: 1967-1976 VALIANT

1967-1976 DART / 1971-1972 DEMON & 1973-1976 DART SPORT REAR FENDER SPLASH SHIELD (sold as a pair)

THESE SHIELDS KEEP THE MUD AND DEBRIS FROM ENTERING THE DOOR HINGE AREA.FITS: 1967-1976 DART SWINGERFITS: 1971-1972 DODGE DEMONFITS: 1973-1976 DART SPORT

RH / 1967-1976 DART & SCAMP A-BODY EXTENDED FLOOR PAN HALF

If you need repairs in a small area then check out our floor pan halves. They are cut from our OE style full floors and have the same dimensions front to rear. Outside edge will meet with rocker panels and inside includes approximately 4-6 inches of the...

LH / 1967-1976 DART & SCAMP A-BODY EXTENDED FLOOR PAN HALF

If you need repairs in a small area then check out our floor pan halves. They are cut from our OE style full floors and have the same dimensions front to rear. Outside edge will meet with rocker panels and inside includes approximately 4-6 inches of the...

RH / 1967-1974 DODGE & PLYMOUTH A-BODY FRONT INNER FENDER

HEAVY GAUGE COMPLETE FULL REPLACEMENT REPRODUCTIONFITS: 1967-74 DARTFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-74 SCAMP

1967-1974 DODGE & PLYMOUTH A-BODY FRONT INNER FENDERS (sold as a pair)

KIT INCLUDES BOTH LH & RH PAIRHEAVY GAUGE COMPLETE FULL REPLACEMENT REPRODUCTIONFITS: 1967-74 DARTFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDA FITS: 1971-74 SCAMP

LH / 1967-1974 DODGE & PLYMOUTH A-BODY FRONT INNER FENDER

HEAVY GAUGE COMPLETE FULL REPLACEMENT REPRODUCTIONFITS: 1967-74 DARTFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-74 SCAMP

RH / 1967-76 DODGE & PLYMOUTH A-BODY INNER FENDER TO FIREWALL BRACKET

EDP COATED & HEAVY GAUGE 2 PIECE FILLER PANEL USED TO ATTACH THE FULL FRONT INNER FENDER (MP-399OE) TO THE COWL PANEL.FITS: 1967-76 DARTFITS: 1970-76 DUSTERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMP

LH / 1967-76 DODGE & PLYMOUTH A-BODY INNER FENDER TO FIREWALL BRACKET

EDP COATED & HEAVY GAUGE 2 PIECE FILLER PANEL USED TO ATTACH THE FULL FRONT INNER FENDER (MP-399OE) TO THE COWL PANEL.FITS: 1967-76 DARTFITS: 1970-76 DUSTERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMP

1967-1976 DODGE & PLYMOUTH A-BODY TORSION BAR CROSSMEMBER

It is important this item be in good shape as it is a major component on the front of the body. Our crossmember has the same metal thickness as OE and the area holding the torsion bars will accept stock size bars as original.FITS: 1967-76 DART &...

1966-70 B-BODY & 1967-72 A-BODY STARTER SPLASH SHIELD

Almost always rusted and in need of repair. Our starter splash shields are a faithful reproduction of the original part. Made from heavy gauge sheet metal on new AMD tooling. Each piece features correct as original rubber seal.FITS: 1966-70...

RH / 1967-76 DODGE & PLYMOUTH A-BODY REAR INNER WHEELHOUSE

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...

LH / 1967-76 DODGE & PLYMOUTH A-BODY REAR INNER WHEELHOUSE

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...

1969 A-BODY & B-BODY FRONT / REAR SIDE MARKER LENSE SET (4pcs)

FITS: 1969 A-BODYFITS: 1969 B-BODY

1967-76 DART & 1971-76 SCAMP FLOOR WIRING COVER SET

NEW REPRODUCTION 4 PIECE SETFITS: 1967-76 DODGE DARTFITS: 1971-76 PLYMOUTH SCAMP

1972-76 A-BODY / 1972-74 E & B-BODY & 1981-93 DODGE TRUCK SIDE MARKER LIGHT SET (4 piece set)

FITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

1967-72 DODGE & PLYMOUTH A-BODY REAR CROSSMEMBER ENDS (sold as a pair)

SOLD AS A PAIR ONLYFITS: 1967-69 BARRACUDA FITS: 1967-72 DARTFITS: 1971-72 SCAMP FITS: 1970-72 DUSTER/1971-72 DEMON

1967-72 DODGE & PLYMOUTH A-BODY REAR CROSSMEMBER

REPRODUCTION REAR CROSS MEMBER LOCATED AT THE BACK EDGE OF THE TRUNK FLOOR.FITS: 1967-69 BARRACUDA FITS: 1967-72 DARTFITS: 1971-72 SCAMP FITS: 1970-72 DUSTERFITS: 1971-72 DEMON

1972-76 A-BODY,1972-74 E & B-BODY,1981-93 DODGE TRUCK REAR SIDE MARKER LIGHT-RED

ORDER 2 PER CARFITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

RH / 1967-74 DODGE & PLYMOUTH A-BODY UPPER DOOR HINGE

FITS: 1967-74 DUSTERFITS: 1971-72 DEMONFITS: 1967-74 DARTFITS: 1973-74 DART SPORTFITS: 1967-69 BARRACUDA

LH / 1967-74 DODGE & PLYMOUTH A-BODY UPPER DOOR HINGE

FITS: 1967-74 DUSTERFITS: 1971-72 DEMONFITS: 1967-74 DARTFITS: 1973-74 DART SPORTFITS: 1967-69 BARRACUDA

1967-74 DODGE & PLYMOUTH A-BODY DOOR HINGES (4 piece set)

COMPLETE REPLACEMENTSFITS: 1967-74 DUSTERFITS: 1971-72 DEMONFITS: 1967-74 DARTFITS: 1973-74 DART SPORTFITS: 1967-69 BARRACUDA