DART

RH / 1967-1974 DODGE & PLYMOUTH A-BODY & 1966-1970 B-BODY LOWER DOOR HINGE

FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDEREFITS: 1966-70 CORONETFITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 SCAMP

LH / 1967-1974 DODGE & PLYMOUTH A-BODY & 1966-1970 B-BODY LOWER DOOR HINGE

FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDEREFITS: 1966-70 CORONETFITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 SCAMP

1972-76 A-BODY,1972-74 E & B-BODY,1981-93 DODGE TRUCK FRONT SIDE MARKER LIGHT (sold as each)

FITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

1967-1976 DODGE & PLYMOUTH A-BODY COMPLETE TRUNK FLOOR (best quality)

SHIPS TRUCK FREIGHTIt is very common to have rust in a Plymouth or Dodge trunk floor. Our OE style pans will drop right in and mate to all adjacent panels. They extend to the trunk extensions on the side, the tail light panel at the rear and the rear...

1968-76 DODGE & PLYMOUTH A-BODY SPARE TIRE / GAS TANK BRACKET

OFTEN RUSTED OR MISSING, THIS SPARE TIRE HOLD DOWN / GAS TANK BRACKET IS NEEDED ON ALMOST EVERY MOPAR A-BODY VEHICLE. THIS ITEM IS INCLUDED WITH OUR FACTORY STYLE TRUNK FLOOR, PART # MP-350OE. FITS: 1968-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS:...

1962-76 DODGE & PLYMOUTH A-BODY TRUNK FLOOR

DIE STAMPED USA MADE SHIPS FED-EX GROUNDMODIFY FOR 1962-66 MODELS-CALL FOR DETAILS.MUST CUT-OUT YOUR OWN DRAIN HOLES AND FILLER NECK HOLES.MUST REUSE EXISTING BRACKETS. FITS: 1964-69 BARRACUDAFITS: 1963-76 VALIANTFITS: 1963-76 DARTFITS: 1973-76 DART...

1967-76 DODGE & PLYMOUTH A-BODY CONSOLE BRACKET SET (manual transmission)

NEW COMPLETE HEAVY GAUGE REPRODUCTION SET.FITS: 1970-76 DUSTERFITS: 1967-76 DART SWINGERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDA

1967-1976 DODGE & PLYMOUTH A-BODY CONSOLE BRACKET SET (automatic transmission)

NEW COMPLETE HEAVY GAUGE REPRODUCTION SET.FITS: 1970-76 DUSTERFITS: 1967-76 DART SWINGERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDA

1967-76 A / B / E-BODY JACK BRACKET SPRING HOOK

MOUNTS ON TRUNK FLOOR EXTENSION. SPRING THAT HOLDS JACK IN PLACE HOOKS TO THIS BRACKET.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGERFITS: 1968-70 CHARGERFITS: 1967-76 DUSTER / DEMON / DART SPORTFITS: 1967-76 DART / VALIANTFITS: 1971-76 SCAMP

1963-66 DODGE & PLYMOUTH A-BODY GAS TANK STRAP (sold as a pair)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.FITS: 1963-66 DODGE DART ALL MODELSFITS: 1964-66 BARRACUDAFITS:...

1967-1976 DODGE & PLYMOUTH A-BODY LOWER RADIATOR SUPPORT

FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1970-76 DUSTERFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMPFITS: 1971-72 DODGE DEMON

1967 DODGE & PLYMOUTH A-BODY GAS TANK STRAP (sold as each)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace. 1 required per car.FITS: 1967 BARRACUDAFITS: 1967 DARTFITS: 1967...

1968-76 DODGE & PLYMOUTH A-BODY GAS TANK STRAPS (sold as a pair)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.FITS: 1968-76 DARTFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS:...

1967-69 DART FRONT & REAR BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer.FITS: 1967-69 DART

1967-69 DODGE DART REAR BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer.FITS: 1967-69 DART

1967-69 DART FRONT BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer.FITS: 1967-69 DART

1962-76 DODGE & PLYMOUTH A-BODY SPARE TIRE WELL

BEST QUALITY, RELIEF CUTS IN OUR PANEL.4 INCHES DEEP, REPAIRS THE SPARE TIRE WELL OF THE TRUNK FLOOR.MUST REUSE EXISTING BRACKET GAS TANK / SPARE TIRE BRACKET. FITS: 1964-69 BARRACUDAFITS: 1963-76 VALIANTFITS: 1963-76 DARTFITS: 1973-76 DART SPORT FITS:...

1966-69 DODGE & PLYMOUTH A & B-BODY BATTERY HOLD DOWN STRAP KIT

SOLD AS A KIT. INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1966-69 CHARGERFITS: 1966-69 CORONETFITS: 1966-69 BELVEDERE / ROADRUNNER / SATELLITE / GTXFITS: 1966-69 DARTFITS: 1966-69 BARRACUDAFITS: 1966-69 VALIANT

1970-71 DODGE & PLYMOUTH B & E-BODY & 1970-76 A-BODY BATTERY TRAY HOLD DOWN KIT

SOLD AS A KIT, INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1970-71 CHARGERFITS: 1970-71 ROADRUNNER-SATELLITE-GTXFITS: 1970 CORONETFITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 DART & SWINGERFITS: 1971-76...

1967-72 DODGE & PLYMOUTH A-BODY VENT WINDOW SEALS

NEW REPRODUCTION SEALS FOR BOTH LH & RH (pair)FITS: 1967-72 DARTFITS: 1967-69 BARRACUDA ALLFITS: 1967-72 VALIANTFITS: 1971-72 SCAMP*2 door hardtop

1963-66 DODGE & PLYMOUTH A-BODY VENT WINDOW SEALS

NEW REPRODUCTION SEALS FOR BOTH LH & RH (pair)FITS: 1963-66 DARTFITS: 1964-66 BARRACUDAFITS: 1963-66 VALIANT*2 door hardtop & convertible

1968-1976 DODGE DART & 1971-1976 SCAMP REAR WINDOW MOLDING SET (2 door hardtop)

NEW HEAVY GAUGE STAINLESS STEEL REPRODUCTION 4 PIECE KIT.FITS: 1968-76 DODGE DART & SWINGERFITS: 1971-76 PLYMOUTH SCAMP*2 door hardtop

1967-76 DART & 1971-76 SCAMP VINYL TOP MOLDING (2 door hardtop)

NEW HEAVY GAUGE REPRODUCTION STAINLESS STEEL 6 PC MOLDING KIT.FITS: 1967-76 DODGE DART & SWINGERFITS: 1971-76 PLYMOUTH SCAMP*2 door hardtop

RH / 1967-76 DART & 1971-76 SCAMP OE STYLE OUTER ROCKER PANEL

FULL REPLACEMENT FACTORY STYLE OUTER ROCKER PANEL FITS: 1967-76 DART-SWINGERFITS: 1971-76 PLYMOUTH SCAMP

LH / 1967-76 DART & 1971-76 SCAMP OE STYLE OUTER ROCKER PANEL

FULL REPLACEMENT FACTORY STYLE OUTER ROCKER PANELFITS: 1967-76 DART-SWINGERFITS: 1971-76 PLYMOUTH SCAMP

1967-76 DART / 1972-76 SCAMP DRIP RAIL MOLDING SET (2 door hardtop)

NEW REPRODUCTION STAINLESS STEEL (like original) 6 PIECE SET FOR THE UPPER DRIP RAIL AND FRONT LOWER A-PILLAR.FITS: 1967-76 DART & SWINGERFITS: 1972-76 SCAMP*2 door hardtop

1968-1976 DODGE DART / 1971-1976 SCAMP & 1968-1969 BARRACUDA FRONT WINDSHIELD MOLDING (2 door hardtop only)

NEW HEAVY GAUGE STAINLESS STEEL REPRODUCTION 5 PIECE KIT.FITS: 1968-76 DODGE DART & SWINGERFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA ALL*can also be used on 1967 dart & barracuda, but must add 1968-up style clips and screw in studs

1967-76 DODGE & PLYMOUTH A-BODY UNDER REAR SEAT FLOOR PAN

SHIPS TRUCK FREIGHTFits under rear seat area, over the top of the axle housing and connects to the rear of the trunk floor pan. Includes emergency brake, rear seat, rear seat belt, exhaust hanger and pinion snubber brackets welded into place where...

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1967-74 DODGE & PLYMOUTH A-BODY / 1966-70 B-BODY & 1970-74 E-BODY DOOR HINGE REBUILD KIT

INCLUDES: 1 pin 3 1/2 INCHES LONG, 1 pin 2 1/2 INCHES LONG AND 4 STANDARD BUSHINGS.FITS: 1967-74 A-BODYFITS: 1966-70 B-BODYFITS: 1970-74 E-BODY*mopars did not come with bushings so some drilling may be required for installation.

1967-76 DODGE & PLYMOUTH A-BODY BATTERY TRAY

REPRODUCTION BATTERY TRAY.FITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 PLYMOUTH SCAMP

1968-76 DART & VALIANT FRONT WINDSHIELD GASKET (sedan only)

NEW REPRODUCTION GASKET, MUST HAVE ORIGINAL TRIM TO RE-INSTALL NEW GASKET. CORRECT LOCK STRIP IS NOT AVAILABLE.FITS: 1968-76 DART & SWINGERFITS: 1968-76 VALIANT* 2 door sedan & 4 door sedan (with post)

1967 DART & 1967 BARRACUDA FRONT WINDSHEILD REVEAL MOLDING SET (8 piece set)

NEW CORRECT 8 PIECE MYLAR CHROME LOCKING STRIP FOR THE 1967 CAR OWNERS THAT WANT TO KEEP ALL ORIGINAL.THIS CHROME LOCK STRIP CAN ONLY BE USED WITH GASKET MP-1404A.FITS: 1967 BARRACUDA (fastback & notchback)FITS: 1967 DART (2 door hardtop)*will not fit...

1967 DART & 1967 BARRACUDA FRONT WINDSHIELD GASKET

NEW CORRECT GASKET THE 1967 CAR OWNERS THAT WANT TO KEEP ALL ORIGINAL. THIS GASKET REQUIRES THE CHROME MYLAR LOCKING STRIP KIT, MP-1404B.FITS: 1967 BARRACUDA (fastback & notchback)FITS: 1967 DART (2 door hardtop)*will not fit convertible

1968-76 DART / 1971-76 SCAMP & 1968-69 BARRACUDA FRONT WINDSHIELD GASKET (2 door hardtop)

NEW REPRODUCTION GASKET ACCEPTS ORIGINAL AND REPRODUCTION REVEAL MOLDINGS.FITS: 1968-76 DARTFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA (fastback & notchback)FITS: 1971-75 VALIANT*2 door hardtop without post between the door glass and quarter...

1963-66 DODGE & PLYMOUTH A-BODY WINDSHIELD GASKET (except convertible)

NEW REPRODUCTION FRONT GLASS CHANNEL WILL ORIGINAL ACCEPT TRIM.FITS: 1963-1966 DARTFITS: 1964-1966 BARRACUDAFITS: 1963-1966 VALIANT

1968-69 BARRACUDA & DART CONVERTIBLE WINDSHIELD GASKET

THIS NEW RUBBER GASKET IS DESIGNED TO ACCEPT ORIGINAL AND REPRODUCTION REVEAL MOLDING.FITS: 1968-69 DARTFITS: 1968-69 BARRACUDA* 1967 models used reveal moldings that snap into the gasket. this gasket can be used on 1967 models if the later reveal...

RH / 1970-76 DART SWINGER & 1971-76 SCAMP REAR QUARTER SKIN

SHIPS TRUCK FREIGHT, 28 IN. HIGH X 86 IN. LONGFITS: 1970-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP*MODIFY SIDE MARKER LAMP FOR 1972-76 MODELS

LH / 1970-76 DART SWINGER & 1971-76 SCAMP REAR QUARTER SKIN

SHIPS TRUCK FREIGHT, 28 IN. HIGH X 86 IN. LONGFITS: 1970-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP*MODIFY SIDE MARKER LAMP FOR 1972-76 MODELS

RH / 1967 DODGE DART REAR QUARTER SKIN

SHIPS TRUCK FREIGHT28 IN. HIGH X 86 IN. LONG

LH / 1967 DODGE DART REAR QUARTER SKIN

SHIPS TRUCK FREIGHT28 IN. HIGH X 86 IN. LONG

1967-1976 DODGE DART & 1971-1976 SCAMP DECK FILLER PANEL (2 door hardtop)

FACTORY STYLE PANEL LOCATED BETWEEN THE REAR WINDOW AND TRUNK LIDEDP COATEDFITS: 1967-76 DODGE DART-SWINGER HARDTOPFITS: 1971-76 PLYMOUTH SCAMP

RH / 1967-76 DODGE DART & 1971-76 SCAMP DECK FILLER-INNER/LOWER SUPPORT

DIE FORMED AND EDP COATEDLOCATED IN EACH LOWER CORNER OF THE DECK FILLER.FITS: 1967-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP

LH / 1967-76 DODGE DART & 1971-76 SCAMP DECK FILLER-INNER/LOWER SUPPORT

DIE FORMED AND EDP COATEDLOCATED IN EACH LOWER CORNER OF THE DECK FILLER.FITS: 1967-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP

RH / 1967-1976 DODGE A-BODY FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 11 IN HIGHFITS: 1967-76 DARTFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

LH / 1967-1976 DODGE A-BODY FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 11 IN. HIGHFITS: 1967-76 DARTFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

CHRYSLER GLOVE BOX BUMPERS-ALL MODELS

KIT DOES ONE CARFITS:64-76 Dodge Dart, 64 330, 440, Polara, 65-70 Coronet, 66-70 Charger, 68 Super Bee, 69 Daytona, 70-74 Challenger, 71-72 Demon, 73 Dart Sport, 71-76 Swinger, 75-76 Dart Sport, 64-76 Plymouth Valiant, 64-74 Barracuda, 64 Fury, 65-70...

RH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

LH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

RH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

LH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

RH / 1967-76 DODGE & PLYMOUTH A-BODY REAR LEAF SPRING MOUNT

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON