DODGE CARS

1967-76 DODGE & PLYMOUTH A-BODY UNDER REAR SEAT FLOOR PAN

SHIPS TRUCK FREIGHTFits under rear seat area, over the top of the axle housing and connects to the rear of the trunk floor pan. Includes emergency brake, rear seat, rear seat belt, exhaust hanger and pinion snubber brackets welded into place where...

1968-70 DODGE & PLYMOUTH B-BODY DOOR WEATHERSTRIP (pair)

SOLD AS A PAIR WITH CLIPS AND MOLDED ENDS.FITS: 1968-70 ROADRUNNER / SATELLITE / GTX / BELVEDEREFITS: 1968-70 CHARGERFITS: 1968-70 CORONET*2 door hardtop, sedan & convertible

RH / 1967-1976 PLYMOUTH A-BODY LONG FLOOR PAN

FITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT FITS: 1967-71 PLYMOUTH VALIANT

LH / 1967-1976 PLYMOUTH A-BODY LONG FLOOR PAN

FITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT FITS: 1967-71 PLYMOUTH VALIANT

1968-70 CHARGER HOOD SIDE-FRONT CORNER BUMPER SET

SOLD AS A 2 PIECE SETFITS: 1968-70 CHARGER

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1968 DODGE & PLYMOUTH B-BODY TRUNK BUMPER SET (except charger)

SOLD AS A 2 PIECE SET.7/8 IN. ROUND X 3/4 IN. HIGHFITS: 1968 CORONET & SUPERBEEFITS: 1968 ROADRUNNER-SATELLITE-GTX(except charger)

1970-1972 DODGE & PLYMOUTH B-BODY & 1970-1974 E-BODY BATTERY TRAY

FITS: 1970-74 BARRACUDA FITS: 1970-74 CHALLENGERFITS: 1970-72 CHARGERFITS: 1970-72 ROADRUNNER-SATELLITE-GTX-BELVEDEREFITS: 1970-72 CORONET

1969-70 CHARGER TAILLIGHT PANEL

WITH TAILLIGHT BRACKETS ATTACHED, REINFORCEMENT BRACKETS REQUIRED

1968 CHARGER TAILLIGHT PANEL

WITH TAILLIGHT BRACKETS ATTACHED

RH / 1968-70 CHARGER REAR VALANCE END CAP

One of our best selling items. Fits between end of quarter panel and rear valance panel. Always rusted or damaged, you'll need these pieces when replacing quarter panels, quarter panel patches and/or a rear valance panel.

LH / 1968-70 CHARGER REAR VALANCE END CAP

One of our best selling items. Fits between end of quarter panel and rear valance panel. Always rusted or damaged, you'll need these pieces when replacing quarter panels, quarter panel patches and/or a rear valance panel.

1969-70 CHARGER TAIL PANEL NAMEPLATE-NON R/T

REPRODUCTIONNOT FOR R/T MODELS, INCLUDES RETAINERSFITS: 1969-70 CHARGER

RH / 1970-1974 CHALLENGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1970-1974 CHALLENGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

1969 DODGE SUPERBEE BUMBLE BEE GRILLE NAMEPLATE

NEW CHRYSLER REPRODUCTION3 3/4 WIDE X 1 3/4 TALL

1968-69 CHARGER SCRIPT, NAMEPLATE

ONLY 1 IN STOCKNEW CHRYSLER REPRODUCTION.FITS: 1968 CHARGER TAIL PANELFITS: 1969 CHARGER HEADLIGHT DOOR

1974 DODGE CHALLENGER CHROME REAR BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1973-1974 DODGE CHALLENGER FRONT CHROME BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1973 CHALLENGER REAR CHROME BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1972 DODGE CHALLENGER REAR CHROME BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1972 DODGE CHALLENGER FRONT CHROME BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

RH / 1971-74 DODGE & PLYMOUTH B-BODY REAR SPRING PERCH-REAR SECTION

USA MADE HEAVY GAUGE. ATTACHES IN THE CORNER OF THE REAR FRAME RAIL AND REAR CROSS MEMBER, 9 INCHES LONGFITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

LH / 1971-74 DODGE & PLYMOUTH B-BODY REAR SPRING PERCH-REAR SECTION

USA MADE HEAVY GAUGE. ATTACHES IN THE CORNER OF THE REAR FRAME RAIL AND REAR CROSS MEMBER, 9 INCHES LONGFITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

RH / 1968-1970 CHARGER REAR QUARTER-LOWER REAR SECTION (without marker hole)

NEW HEAVY GAUGE REPRODUCTION.FITS: 1968-1970 CHARGER

LH / 1968-1970 CHARGER REAR QUARTER-LOWER REAR SECTION (without marker hole)

NEW HEAVY GAUGE REPRODUCTION.FITS: 1968-1970 CHARGER

LH / 1970 CHARGER REAR QUARTER SKIN

SHIPS TRUCK FREIGHTAMD quarter panel skins are the highest quality on the market. They are cut from full OE style panels so they extend to all mating surfaces including door jamb, wheel house and tail light/valance panel area. Top edge of panel bends...

RH / 1969 CHARGER REAR QUARTER SKIN

SHIPS TRUCK FREIGHTAMD quarter panel skins are the highest quality on the market. They are cut from full OE style panels so they extend to all mating surfaces including door jamb, wheel house and tail light/valance panel area. Top edge of panel bends...

LH / 1969 CHARGER REAR QUARTER SKIN

SHIPS TRUCK FREIGHTAMD quarter panel skins are the highest quality on the market. They are cut from full OE style panels so they extend to all mating surfaces including door jamb, wheel house and tail light/valance panel area. Top edge of panel bends...

1969-70 CHARGER & 1969 BARRACUDA FLIP UP GAS CAP

FLIP-TOP FUEL CAP. NOT A CONCOURS PART DUE TO SMALL SURFACE IMPERFECTIONS ON THE FINISH. CHROME-PLATED WITH A BLACK PAINTED TOP WITH "FUEL" LETTERING. INNER SEAL INCLUDED.FITS: 1969-70 CHARGERFITS: 1969 BARRACUDA

1968 CHARGER / 1967 GTX & 1967-1968 BARRACUDA FLIP UP GAS CAP

FLIP-TOP FUEL CAP. THIS IS A QUALITY REPLACEMENT CAP BUT NOT CONCOURS DUE TO MINOR IMPERFECTIONS IN THE TOOLING. PLAIN BRUSHED FINISH WITH NO LETTERING. INNER SEAL INCLUDED.FITS: 1968 DODGE CHARGERFITS: 1967 GTXFITS: 1967-1968 BARRACUDA

1970-74 CHALLENGER & BARRACUDA TRUNK FLOOR GAS TANK BRACE (sold as each)

THIS UNDERSIDE TRUNK FLOOR BRACE HELPS STABILIZE THE GAS TANK WHEN MOUNTED, AND THE STRAPS ATTACH HERE ALONG WITH THE J-BOLTS. 2 REQUIRED PER CAR.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA*2 door hardtop & convertible

1970-72 CHALLENGER REAR BUMPER GUARD BRACKET SET

NEW REPRODUCTION, SOLD AS 4PC SET ONLYFITS: 1970-72 DODGE CHALLENGER

RH / 1970-74 CHALLENGER REAR QUARTER-LOWER REAR SECTION

HEAVY GAUGE DIE STAMPED REPRODUCTION, WITH OUT SIDE MARKER LAMP HOLE. DOES NOT INCLUDE THE MOUNTING HOLES FOR THE REAR VALANCE, BEST TO USED AS A "PATCH" FOR MINOR RUST REPAIR.20" HEIGHT / 28" LENGTHFITS: 1970-74 CHALLENGER

LH / 1970-74 CHALLENGER REAR QUARTER-LOWER REAR SECTION

HEAVY GAUGE DIE STAMPED REPRODUCTION, WITH OUT SIDE MARKER LAMP HOLE. DOES NOT INCLUDE THE MOUNTING HOLES FOR THE REAR VALANCE, BEST TO USED AS A "PATCH" FOR MINOR RUST REPAIR.20" HIGH  28" LENGTHFITS: 1970-74 CHALLENGER

1970-72 DODGE CHALLENGER REAR CHROME BUMPER GUARDS (sold as a pair)

NEW REPRODUCTION.FITS: 1970-1972 CHALLENGER

1970-71 DODGE CHALLENGER CHROME REAR BUMPER (without jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

RH / 1966-1970 DODGE & PLYMOUTH B-BODY OUTER LOWER DOOR HINGE PILLAR

DIE FORMED & EDP COATEDREPAIRS UPPER & LOWER DOOR HINGE LOCATIONS.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET & SUPERBEEFITS: 1968-70 ROADRUNNER-GTX-SATELLITE

LH / 1968-1970 DODGE & PLYMOUTH B-BODY OUTER LOWER DOOR HINGE PILLAR

DIE FORMED & EDP COATEDREPAIRS UPPER & LOWER DOOR HINGE LOCATIONS.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET & SUPERBEEFITS: 1968-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

RH / 1966-1970 DODGE & PLYMOUTH B-BODY INNER COWL SIDE PANEL

DIE FORMED AND EDP COATEDLOCATED BEHIND THE DOOR HINGE POST AND THE OUTER COWL.FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

LH / 1966-1970 DODGE & PLYMOUTH B-BODY INNER COWL SIDE PANEL

DIE FORMED AND EDP COATEDLOCATED BEHIND THE DOOR HINGE POST AND THE OUTER COWL.FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

1966-1970 DODGE & PLYMOUTH B-BODY UPPER OUTER COWL PANEL

FITS: 1966-70 CHARGERFITS: 1966-70 CORONETFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

1966-1970 DODGE & PLYMOUTH B-BODY LOWER COWL PLENUM

FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

1966-67 DODGE & PLYMOUTH B-BODY SPARE TIRE HOLD DOWN BRACKET

FITS: 1966-67 CORONETFITS: 1966-67 CHARGERFITS: 1966-67 SATELLITE / GTX / BELVEDERE

1970-1971 DODGE CHALLENGER FRONT CHROME BUMPER (without jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1967-76 DODGE & PLYMOUTH A-BODY BATTERY TRAY

REPRODUCTION BATTERY TRAY.FITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 PLYMOUTH SCAMP

RH / 1971-74 CHARGER OUTER SLIP-ON ROCKER

HANDFORMED, SAME WIDTH AS DOOR

1966-67 DODGE CHARGER REAR WINDOW GASKET

NEW REPRODUCTION GASKET WILL ACCEPT TRIMFITS: 1966-67 DODGE CHARGER*will not fit cars with vinyl top

1966-67 DODGE & PLYMOUTH B-BODY REAR WINDOW GASKET (2 door hardtop)

NEW REPRODUCTION GASKET WITH GROOVE FOR TRIM.FITS: 1966-67 BELVEDERE / SATELLITEFITS: 1966-67 CORONET*will not fit cars with vinyl top

1964-65 DODGE & PLYMOUTH B-BODY REAR WINDOW GASKET (2 door hardtop)

NEW REPRODUCTION GASKET WITH GROOVE FOR TRIM.FITS: 1964 330 / 440FITS: 1965 CORONETFITS: 1964 POLARAFITS: 1964-65 BELVEDEREFITS: 1965 SATELLITEFITS: 1964 FURYFITS: 1965 SATELLITEFITS: 1964 SAVOY

1964-65 DODGE & PLYMOUTH B-BODY REAR WINDOW GASKET (except 2 door hardtop)

NEW REPRODUCTION GASKET WITH GROOVE FOR TRIM.FITS: 1964-65 BELVEDEREFITS: 1964-65 CORONETFITS: 1965 SATELLITE*2 door & 4 door sedan

1963 DODGE & PLYMOUTH B-BODY REAR WINDOW GASKET (all models)

NEW REPRODUCTION GASKET WITH GROOVE FOR TRIM.FITS: 1963 BELVEDEREFITS: 1963 FURY / SAVOYFITS: 1963 POLARA*2 / 4 door hardtop & sedan