DODGE CARS

1962 DODGE & PLYMOUTH B-BODY REAR WINDOW GASKET (all models)

NEW REPRODUCTION GASKET WITH GROOVE FOR TRIM.FITS: 1962 DARTFITS: 1962 BELVEDEREFITS: 1962 FURYFITS: 1962 SAVOY*2 / 4 door hardtop & sedan

1966-67 DODGE & PLYMOUTH B-BODY WINDSHIELD GASKET (2 door hardtop)

NEW REPRODUCTION GASKET WITH GROOVE FOR TRIM.FITS: 1966-67 CHARGERFITS: 1966-67 CORONETFITS: 1966-67 SATELLITE / GTX / BELVEDERE*will not fit convertible or sedan models

1964-65 DODGE & PLYMOUTH B-BODY FRONT WINDSHIELD GASKET (convertible)

NEW REPRODUCTION GASKET ACCEPTS TRIM.FITS: 1964 POLARAFITS: 1965 CORONETFITS: 1964 FURYFITS: 1965 SATELLITE

1964-65 DODGE & PLYMOUTH B-BODY FRONT WINDSHIELD GASKET (hardtop & sedan)

NEW REPRODUCTION GASKET ACCEPTS TRIMFITS: 1964-65 330 / 440FITS: 1965 CORONETFITS: 1964 POLARAFITS: 1964-65 BELVEDEREFITS: 1964 FURYFITS: 1964 SAVOYFITS: 1965 SATELLITE*2 door, 4 door, hardtop & sedan

1962-63 DODGE & PLYMOUTH B-BODY FRONT WINDSHIELD GASKET

NEW REPRODUCTION GASKET ACCEPTS TRIMFITS: 1962 DARTFITS: 1962-63 BELVEDEREFITS: 1962-63 330 / 440FITS: 1962-63 POLARAFITS: 1962-63 FURYFITS: 1962-63 SAVOY*2 door hardtop, sedan & wagon

1968-76 DART & VALIANT FRONT WINDSHIELD GASKET (sedan only)

NEW REPRODUCTION GASKET, MUST HAVE ORIGINAL TRIM TO RE-INSTALL NEW GASKET. CORRECT LOCK STRIP IS NOT AVAILABLE.FITS: 1968-76 DART & SWINGERFITS: 1968-76 VALIANT* 2 door sedan & 4 door sedan (with post)

1967 DART & 1967 BARRACUDA FRONT WINDSHEILD REVEAL MOLDING SET (8 piece set)

NEW CORRECT 8 PIECE MYLAR CHROME LOCKING STRIP FOR THE 1967 CAR OWNERS THAT WANT TO KEEP ALL ORIGINAL.THIS CHROME LOCK STRIP CAN ONLY BE USED WITH GASKET MP-1404A.FITS: 1967 BARRACUDA (fastback & notchback)FITS: 1967 DART (2 door hardtop)*will not fit...

1967 DART & 1967 BARRACUDA FRONT WINDSHIELD GASKET

NEW CORRECT GASKET THE 1967 CAR OWNERS THAT WANT TO KEEP ALL ORIGINAL. THIS GASKET REQUIRES THE CHROME MYLAR LOCKING STRIP KIT, MP-1404B.FITS: 1967 BARRACUDA (fastback & notchback)FITS: 1967 DART (2 door hardtop)*will not fit convertible

1968-76 DART / 1971-76 SCAMP & 1968-69 BARRACUDA FRONT WINDSHIELD GASKET (2 door hardtop)

NEW REPRODUCTION GASKET ACCEPTS ORIGINAL AND REPRODUCTION REVEAL MOLDINGS.FITS: 1968-76 DARTFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA (fastback & notchback)FITS: 1971-75 VALIANT*2 door hardtop without post between the door glass and quarter...

1963-66 DODGE & PLYMOUTH A-BODY WINDSHIELD GASKET (except convertible)

NEW REPRODUCTION FRONT GLASS CHANNEL WILL ORIGINAL ACCEPT TRIM.FITS: 1963-1966 DARTFITS: 1964-1966 BARRACUDAFITS: 1963-1966 VALIANT

1968-69 BARRACUDA & DART CONVERTIBLE WINDSHIELD GASKET

THIS NEW RUBBER GASKET IS DESIGNED TO ACCEPT ORIGINAL AND REPRODUCTION REVEAL MOLDING.FITS: 1968-69 DARTFITS: 1968-69 BARRACUDA* 1967 models used reveal moldings that snap into the gasket. this gasket can be used on 1967 models if the later reveal...

RH / 1970-76 DART SWINGER & 1971-76 SCAMP REAR QUARTER SKIN

SHIPS TRUCK FREIGHT, 28 IN. HIGH X 86 IN. LONGFITS: 1970-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP*MODIFY SIDE MARKER LAMP FOR 1972-76 MODELS

LH / 1970-76 DART SWINGER & 1971-76 SCAMP REAR QUARTER SKIN

SHIPS TRUCK FREIGHT, 28 IN. HIGH X 86 IN. LONGFITS: 1970-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP*MODIFY SIDE MARKER LAMP FOR 1972-76 MODELS

RH / 1967 DODGE DART REAR QUARTER SKIN

SHIPS TRUCK FREIGHT28 IN. HIGH X 86 IN. LONG

LH / 1967 DODGE DART REAR QUARTER SKIN

SHIPS TRUCK FREIGHT28 IN. HIGH X 86 IN. LONG

1967-1976 DODGE DART & 1971-1976 SCAMP DECK FILLER PANEL (2 door hardtop)

FACTORY STYLE PANEL LOCATED BETWEEN THE REAR WINDOW AND TRUNK LIDEDP COATEDFITS: 1967-76 DODGE DART-SWINGER HARDTOPFITS: 1971-76 PLYMOUTH SCAMP

RH / 1967-76 DODGE DART & 1971-76 SCAMP DECK FILLER-INNER/LOWER SUPPORT

DIE FORMED AND EDP COATEDLOCATED IN EACH LOWER CORNER OF THE DECK FILLER.FITS: 1967-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP

LH / 1967-76 DODGE DART & 1971-76 SCAMP DECK FILLER-INNER/LOWER SUPPORT

DIE FORMED AND EDP COATEDLOCATED IN EACH LOWER CORNER OF THE DECK FILLER.FITS: 1967-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP

LH / 1972-76 DUSTER / DEMON / DART SPORT QUARTER SKIN

SHIPS TRUCK FREIGHT32 IN. HIGH X 82 IN. LONGFITS: 1972-76 DUSTERFITS: 1972 DEMONFITS: 1973-76 DART SPORT

1969-1970 CHARGER REAR LOWER STEEL VALANCE

Often bent and rusted, our valance panels are complete OE style and are direct replacements of originals. Made to original thickness from durable steel and EDP coated for corrosion resistance.FITS: 1969-1970 CHARGER

1968 CHARGER REAR LOWER STEEL VALANCE

Often bent and rusted, our valance panels are complete OE style and are direct replacements of originals. Made to original thickness from durable steel and EDP coated for corrosion resistance.   FITS: 1968 CHARGER

RH / 1970-74 CHALLENGER OUTER ROCKER PANEL

FULL LENGTH FACTORY STYLE OUTER ROCKER PANEL EXTENDS TO THE FRONT OF THE REAR TIRE LIKE ORIGINAL.*hardtop & convertible

LH / 1970-74 CHALLENGER OUTER ROCKER PANEL

FULL LENGTH FACTORY STYLE OUTER ROCKER PANEL EXTENDS TO THE FRONT OF THE REAR TIRE LIKE ORIGINAL.*hardtop & convertible

RH / 1970-74 BARRACUDA & CHALLENGER ROCKER PANEL FRONT END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces. 2 door hardtop & convertible

LH / 1970-74 BARRACUDA & CHALLENGER ROCKER PANEL FRONT END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces. 2 door hardtop & convertible

RH / BARRACUDA & CHALLENGER SLIP OVER ROCKER PANEL SKIN

HAND FORMED. ROCKER PANEL SKIN RUNS THE WIDTH OF THE DOOR GREAT FOR MINOR RUST REPAIR. 51 INCHES LONG*driver side no longer available from abs

RH / 1967-1976 DODGE A-BODY FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 11 IN HIGHFITS: 1967-76 DARTFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

LH / 1967-1976 DODGE A-BODY FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 11 IN. HIGHFITS: 1967-76 DARTFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

RH / 1968-70 DODGE B-BODY OUTER WHEELHOUSE (hardtop)

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET*2...

LH / 1968-70 DODGE B-BODY OUTER WHEELHOUSE (hardtop)

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET*2...

RH / 1968-1970 CHARGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1968-1970 CHARGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

RH / 1968-1970 CHARGER FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 11 IN. HIGHFITS: 1968-70 CHARGER

LH / 1968-1970 CHARGER FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 11 IN. HIGHFITS: 1968-70 CHARGER

RH / 1968-70 CHARGER FRONT FENDER-LOWER REAR SECTION (without brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. 16 IN. HIGHFITS: 1968-70 CHARGER

LH / 1968-70 CHARGER FRONT FENDER-LOWER REAR SECTION (without brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. 16 IN. HIGHFITS: 1968-70 CHARGER

1970 CHALLENGER R/T NAMEPLATE FOR LH SIDE OF GRILLE

NEW REPRODUCTION

CHRYSLER GLOVE BOX BUMPERS-ALL MODELS

KIT DOES ONE CARFITS:64-76 Dodge Dart, 64 330, 440, Polara, 65-70 Coronet, 66-70 Charger, 68 Super Bee, 69 Daytona, 70-74 Challenger, 71-72 Demon, 73 Dart Sport, 71-76 Swinger, 75-76 Dart Sport, 64-76 Plymouth Valiant, 64-74 Barracuda, 64 Fury, 65-70...

RH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

LH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

RH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

LH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

RH / 1967-76 DODGE & PLYMOUTH A-BODY REAR LEAF SPRING MOUNT

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

LH / 1967-76 DODGE & PLYMOUTH A-BODY REAR LEAF SPRING MOUNT

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

RH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT SPRING PERCH

NEW HEAVY GAUGE EDP COATED REPRODUCTION AS ORIGINALFITS: 1967-76 DARTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

LH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT SPRING PERCH

NEW HEAVY GAUGE EDP COATED REPRODUCTION AS ORIGINALFITS: 1967-76 DARTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

DODGE & PLYMOUTH ANTENNA GASKET-EACH

APPLICATIONS:67-74 Dodge Dart, 64 330, Polara, 440, 65-70 Charger, 68 Super Bee, 69 Daytona, 70-74 Challenger, 71-74 Swinger, 67-74 Plymouth Valiant, Barracuda, 64 Fury, 65-70- Bevedere, Satellite, 67-70 Gtx, 68-70 Road Runner, 70-74 Duster, Cuda, 71-74...

MOPAR DOOR AND TRUNK LOCK GASKET SET-3 PCS

APPLICATIONS:66-70 Dodge Dart, 66-70 Plymouth Valiant, 66-69 Barracuda, 70 Duster 70-74 E Body

DODGE & PLYMOUTH DOOR HANDLE GASKETS (4 piece set)

FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER/ GTX / SATELLITE / BELVEDEREFITS: 1967-70 DART & SWINGERFITS: 1967-69 BARRACUDAFITS: 1970 DUSTER

1972-1973 DODGE & PLYMOUTH DOOR BUMPER SET (rectangular)

FITS: 1972-73 DARTFITS: 1972 DEMONFITS: 1973 DART SPORTFITS: 1972-73 SCAMPFITS: 1973 DUSTERFITS: 1973 BARRACUDA

MOPAR HOOD ADJUSTMENT BUMPER SET-WITH THREADED SCREW

APPLICATIONS:64-72 Dodge Dart, 64 330, 440, Polara, 65-70 Coronet, 66-70 Charger, 68 Super Bee, 69 Daytona, 70-72 Challenger, 71-72 Demon, Swinger, Plymouth 64-72 Valiant, Barracuda, 64 Fury, 65-70 Belvedere, Satellite, 67-70 Gtx, 68-70 Roadrunner, 70-72...

1967-76 DODGE & PLYMOUTH BUMPER BOLT SET (8 bolts)

Don't ruin the look of your restoration by trying to reuse old, rusted hardware that not only looks bad, but could also be a safety hazard. ABS bumper mounting bolts are precision-manufactured from steel with a stainless steel cap.*8 Bolts, 8 Flat...