DODGE CARS

RH / 1969 CHARGER OE STYLE REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

LH / 1969 CHARGER OE STYLE REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

RH / 1968 CHARGER OE STYLE REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

LH / 1968 CHARGER OE STYLE REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

1970-1974 CHALLENGER ROOF PANEL OUTER SKIN

SHIPS TRUCK FREIGHTIt is often easier to replace a top skin than to repair rusted areas. If you have rust under a vinyl top this piece can be a real time saver. Made to OE specifications this skin covers the entire roof area and mates with the A pillars...

1968-70 DODGE & PLYMOUTH B-BODY GAS TANK STRAPS (pair)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.FITS: 1968-70 CHARGERFITS: 1968-70 CORONETFITS: 1968-70 ROADRUNNER /...

1967-69 DART FRONT & REAR BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer.FITS: 1967-69 DART

1967-69 DODGE DART REAR BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer.FITS: 1967-69 DART

1967-69 DART FRONT BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer.FITS: 1967-69 DART

1968-70 DODGE CHARGER REAR BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer. Pentastar logos and part numbers are stamped...

1968-69 CHARGER CENTER REINFORCEMENT BAR

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. Mounts from the front valance to the center of the k-member.FITS: 1968-69 CHARGER

1968-69 CHARGER FRONT BUMPER STABILIZER CORNER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer.FITS: 1968-69 CHARGER

1968-69 CHARGER FRONT BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer. 4 piece set.FITS: 1968-69 CHARGER

1968-69 CORONET REAR BUMPER BRACKET SET

COMPLETE KIT FOR MOUNTING THE REAR BUMPER.FITS: 1968-69 CORONET & SUPERBEE

1968-69 DODGE CORONET FRONT BUMPER BRACKET SET

COMPLETE KIT FOR MOUNTING THE FRONT BUMPER.FITS: 1968-69 CORONET & SUPERBEE

1970-72 CHALLENGER FRONT & REAR BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer. Pentastar logos and part numbers are stamped...

1970-72 CHALLENGER FRONT BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer. Pentastar logos and part numbers are stamped...

1968-69 CORONET FRONT BUMPER LOWER SHIELD

FITS: 1968-69 CORONET & SUPERBEE

1970-1974 CHALLENGER FRONT STEEL VALANCE

Auto Metal Direct front valances are a great choice for your next muscle car restoration project! Constructed from durable steel, these valances are EDP coated for rust resistance. Auto Metal Direct front valances are direct replacements for the stock...

1962-76 DODGE & PLYMOUTH A-BODY SPARE TIRE WELL

BEST QUALITY, RELIEF CUTS IN OUR PANEL.4 INCHES DEEP, REPAIRS THE SPARE TIRE WELL OF THE TRUNK FLOOR.MUST REUSE EXISTING BRACKET GAS TANK / SPARE TIRE BRACKET. FITS: 1964-69 BARRACUDAFITS: 1963-76 VALIANTFITS: 1963-76 DARTFITS: 1973-76 DART SPORT FITS:...

RH / 1972-74 E-BODY & 1972 B-BODY FRONT INNER FENDER

FITS: 1972-74 BARRACUDAFITS: 1972-74 CHALLENGERFITS: 1972 CHARGERFITS: 1972 ROADRUNNER / SATELLITE

LH / 1972-74 E-BODY & 1972 B-BODY FRONT INNER FENDER

FITS: 1972-74 BARRACUDAFITS: 1972-74 CHALLENGERFITS: 1972 CHARGERFITS: 1972 ROADRUNNER / SATELLITE

RH / 1970-71 E-BODY & 1971 B-BODY FRONT INNER FENDER

FITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1971 CHARGERFITS: 1971 ROADRUNNER-SATELLITE-GTX

LH / 1970-71 E-BODY & 1971 B-BODY FRONT INNER FENDER

FITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1971 CHARGERFITS: 1971 ROADRUNNER-SATELLITE-GTX

1969-70 CHARGER TAIL PANEL REINFORCEMENT BRACKETS

SOLD AS 2 PC SET LH & RHNOT INCLUDED IN OUR TAIL LIGHT PANELS.FITS: 1969-70 CHARGER

1970-1974 CHALLENGER DECK FILLER PANEL CENTER SUPPORT

THIS STAMPED STEEL EDP COATED BRACE IS WELDED UNDERNEATH THE REAR SHELF PANEL FOR ADDITIONAL SUPPORT. 1 REQUIRED PER CAR.FITS: 1970-1974 CHALLENGER

1970-1974 CHALLENGER REAR DECK FILLER PANEL (2 door hardtop)

LOCATED BETWEEN THE REAR WINDOW AND TRUNK LID. ALSO KNOWN AS A DUTCHMAN PANEL.FITS: 1970-1974 CHALLENGER HARDTOP

1971-74 BARRACUDA & CHALLENGER ROOF RAIL WEATHERSTRIP (2 door hardtop)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1971-74 CHALLENGERFITS: 1971-74 BARRACUDA & CUDA

1970 BARRACUDA & CHALLENGER ROOFRAIL WEATHERSTRIP (2 door hardtop)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1970 CHALLENGERFITS: 1970 BARRACUDA & CUDA

1970-74 CHALLENGER HOOD SIDE-FRONT CORNER BUMPER SET

SOLD AS A 2 PIECE SET.1 IN. WIDE X 1-1/8 IN. THICKFITS: 1970-74 CHALLENGER ALL

1972-74 DODGE & PLYMOUTH B & E-BODY BATTERY HOLD DOWN KIT

SOLD AS A KIT. INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1972-74 CHALLENGERFITS: 1972-74 BARRACUDAFITS: 1972-74 CHARGERFITS: 1972-74 ROADRUNNER / SATELLITE

1968-1969 CHARGER FRONT STEEL VALANCE

Auto Metal Direct front valances are a great choice for your next muscle car restoration project! Constructed from durable steel, these valances are EDP coated for rust resistance. Auto Metal Direct front valances are direct replacements for the stock...

1966-69 DODGE & PLYMOUTH A & B-BODY BATTERY HOLD DOWN STRAP KIT

SOLD AS A KIT. INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1966-69 CHARGERFITS: 1966-69 CORONETFITS: 1966-69 BELVEDERE / ROADRUNNER / SATELLITE / GTXFITS: 1966-69 DARTFITS: 1966-69 BARRACUDAFITS: 1966-69 VALIANT

1966-1969 DODGE & PLYMOUTH B-BODY BATTERY TRAY KIT

REPRODUCTION BATTERY TRAY AND HOLD DOWN KIT.FITS: 1966-69 CHARGERFITS: 1966-69 CORONETFITS: 1966-69 BELVEDERE / ROADRUNNER / GTX / SATELLITE

1966-69 DODGE & PLYMOUTH B-BODY BATTERY TRAY

REPRODUCTION BATTERY TRAY.FITS: 1966-69 CHARGERFITS: 1966-69 CORONETFITS: 1966-69 BELVEDERE / ROADRUNNER / GTX / SATELLITE

RH / 1971-74 DODGE & PLYMOUTH B-BODY REAR FRAME RAIL-REAR SECTION

50 IN. LONG FROM THE REAR CROSS MEMBER FORWARD, SLEEVES INTO EXISTING FRAME RAIL. (this is not a cap)FITS: 1971-74 CHARGER FITS: 1971-74 ROADRUNNER / GTX / SATELLITE

LH / 1971-74 DODGE & PLYMOUTH B-BODY REAR FRAME RAIL-REAR SECTION

50 IN. LONG FROM THE REAR CROSS MEMBER FORWARD, SLEEVES INTO EXISTING FRAME RAIL. (this is not a cap)FITS: 1971-74 CHARGER FITS: 1971-74 ROADRUNNER / GTX / SATELLITE

1968-1970 CHARGER VINYL TOP MOLDING SET (4 piece set)

Set of 4 pieces that separate the vinyl top from the painted body panels. Includes the two die cast corner pieces as well as two stainless pieces.FITS: 1968-70 CHARGER

1968-69 CHARGER UPPER GRILL REINFORCEMENT

SHIPS TRUCK FREIGHT

RH / 1971-1974 CHALLENGER COMPLETE INNER ROCKER PANEL

NEW ONE PIECE FULL LENGTH INNER ROCKER PANEL BACKING PLATE.*hardtop & convertible

LH / 1971-1974 CHALLENGER COMPLETE INNER ROCKER PANEL

NEW ONE PIECE FULL LENGTH INNER ROCKER PANEL BACKING PLATE.*hardtop & convertible

RH / 1970 CHALLENGER COMPLETE INNER ROCKER PANEL

NEW ONE PIECE FULL LENGTH INNER ROCKER PANEL BACKING PLATE.*hardtop & convertible

LH / 1970 CHALLENGER COMPLETE INNER ROCKER PANEL

NEW ONE PIECE FULL LENGTH INNER ROCKER PANEL BACKING PLATE.*hardtop & convertible

1970 DODGE CHALLENGER GRILLE EMBLEM

NEW REPRODUCTION CHALLENGER SCRIPTFITS: 1970 CHALLENGER

1970-1974 CHALLENGER & BARRACUDA WINDSHIELD MOLDING SET (2 door hardtop)

Finish off you windshield installation with a new set of AMD moldings. Finding a Cuda or Challenger lower windshield molding without scratches from the wipers is a real challenge. Our moldings are made of stainless steel like OE and fit the factory style...

1970-1974 DODGE CHALLENGER REAR WINDOW MOLDING SET

Don't change your back glass without installing a new set of AMD moldings. Our moldings are stainless steel like OE and will fit the factory style clips.FITS: 1970-1974 DODGE CHALLENGER*except R/T

RH / 1962-65 DODGE & PLYMOUTH B-BODY UNDER THE FRONT SEAT FLOOR PAN

USA MADE, 20 LONG X 31 WIDEFITS: 1962-65 330 / 440 / CORONETFITS: 1962 DARTFITS: 1962-64 POLARAFITS: 1965 BELVEDEREFITS: 1965 SATELLITEFITS: 1962-64 FURY & SPORT FURYFITS: 1962-64 SAVOY

RH / 1962-65 DODGE & PLYMOUTH B-BODY FRONT FLOOR PAN SECTION

USA MADE HEAVY GAUGE & DIE STAMPED25 IN. LONG X 25 IN. WIDEFITS: 1962-65 330 / 440 / CORONETFITS: 1962 DARTFITS: 1962-64 POLARAFITS: 1965 BELVEDEREFITS: 1965 SATELLITEFITS: 1962-64 FURY & SPORT FURYFITS: 1962-64 SAVOY

LH / 1962-65 DODGE & PLYMOUTH B-BODY FRONT FLOOR PAN SECTION

USA MADE HEAVY GAUGE & DIE STAMPED25 IN. LONG X 25 IN. WIDEFITS: 1962-65 330 / 440 / CORONETFITS: 1962 DARTFITS: 1962-64 POLARAFITS: 1965 BELVEDEREFITS: 1965 SATELLITEFITS: 1962-64 FURY & SPORT FURYFITS: 1962-64 SAVOY

1968-1970 CHARGER REAR WINDOW MOULDING SET

NEW HEAVY GAUGE STAINLESS STEEL REPRODUCTION 5 PIECE KIT.FITS: 1968-70 CHARGER

1968-1970 DODGE & PLYMOUTH B-BODY FRONT WINDSHIELD MOULDING SET (2 door hardtop & sedan)

NEW HEAVY GAUGE STAINLESS STEEL REPRODUCTION 7 PIECE KIT.FITS: 1968-70 CHARGERFITS: 1968-70 ROARUNNER / GTX / SATELLITE / BELVEDEREFITS: 1968-70 CORONET*2 door hardtop & 2 door sedan

1970-71 DODGE & PLYMOUTH B & E-BODY & 1970-76 A-BODY BATTERY TRAY HOLD DOWN KIT

SOLD AS A KIT, INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1970-71 CHARGERFITS: 1970-71 ROADRUNNER-SATELLITE-GTXFITS: 1970 CORONETFITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 DART & SWINGERFITS: 1971-76...