1971-1974

1971-1973 DODGE & PLYMOUTH B-BODY ONE PIECE TRUNK FLOOR

SHIPS TRUCK FREIGHTIt is very common to have rust in a Plymouth or Dodge trunk floor. Our OE style pans will drop right in and mate to all adjacent panels. They extend to the trunk extensions on the side, the tail light panel at the rear and the rear...

1973-1974 DODGE CHARGER STEEL FRONT VALANCE

Auto Metal Direct front valances are a great choice for your next muscle car restoration project! Constructed from durable steel, these valances are EDP coated for rust resistance. Auto Metal Direct front valances are direct replacements for the stock...

1971-1972 DODGE CHARGER STEEL FRONT VALANCE

Auto Metal Direct front valances are a great choice for your next muscle car restoration project! Constructed from durable steel, these valances are EDP coated for rust resistance. Auto Metal Direct front valances are direct replacements for the stock...

1971-73 DODGE & PLYMOUTH B-BODY GAS TANK STRAPS (pair)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.FITS: 1971-73 CHARGERFITS: 1971-73 ROADRUNNER / GTX /...

RH / 1971-1974 B / E-BODY FRONT FLOOR PAN HALVE

NEW EXACT DIE STAMPED FLOOR FROM THE FIREWALL SEAM TO THE FACTORY SEAM BEHIND THE FRONT SEAT.LEAVE TUNNEL. 26 WIDE X 48 LONG FITS: 1971-74 CHALLENGERFITS: 1971-74 BARRACUDA FITS: 1971-74 CHARGER / SUPERBEEFITS: 1971-74 ROADRUNNER / SATELLITE / GTX

LH / 1971-1974 B / E-BODY FRONT FLOOR PAN HALVE

NEW EXACT DIE STAMPED FLOOR FROM THE FIREWALL SEAM TO THE FACTORY SEAM BEHIND THE FRONT SEAT.LEAVE TUNNEL. 26 WIDE X 48 LONG FITS: 1971-74 CHALLENGERFITS: 1971-74 BARRACUDA FITS: 1971-74 CHARGER / SUPERBEEFITS: 1971-74 ROADRUNNER / SATELLITE / GTX

1970-1974 E-BODY & 1971-1974 B-BODY MAIN FLOOR PAN SUPPORT-SET

Often damaged and rusted, it is important these small brackets are in good shape when replacing the floor pan. Attach to the inner rocker panels and hold up the front floor pan.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGERFITS: 1971-74 CHARGERFITS:...

1971-72 B-BODY & 1970-74 E-BODY RADIATOR SUPPORT LOWER SECTION ONLY

Often bent and distorted, our piece is a faithful reproduction of the bottom portion of the radiator supportFITS: 1971-72 CHARGERFITS: 1971-72 ROADRUNNER / SATELLITE / GTXFITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

1971-72 B-BODY & 1970-74 E-BODY RADIATOR SUPPORT ASSMEBLY

THIS SUPPORT IS REPRODUCED FOR THE 26 INCH RADIATORSFITS: 1971-72 CHARGER/SUPER BEE,FITS: 1971-72 ROADRUNNER / GTX / SATELLITEFITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

RH / 1971 CHARGER FULL OE STYLE REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

RH / 1972-74 E-BODY & 1972 B-BODY FRONT INNER FENDER

FITS: 1972-74 BARRACUDAFITS: 1972-74 CHALLENGERFITS: 1972 CHARGERFITS: 1972 ROADRUNNER / SATELLITE

LH / 1972-74 E-BODY & 1972 B-BODY FRONT INNER FENDER

FITS: 1972-74 BARRACUDAFITS: 1972-74 CHALLENGERFITS: 1972 CHARGERFITS: 1972 ROADRUNNER / SATELLITE

RH / 1970-71 E-BODY & 1971 B-BODY FRONT INNER FENDER

FITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1971 CHARGERFITS: 1971 ROADRUNNER-SATELLITE-GTX

LH / 1970-71 E-BODY & 1971 B-BODY FRONT INNER FENDER

FITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1971 CHARGERFITS: 1971 ROADRUNNER-SATELLITE-GTX

1972-74 DODGE & PLYMOUTH B & E-BODY BATTERY HOLD DOWN KIT

SOLD AS A KIT. INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1972-74 CHALLENGERFITS: 1972-74 BARRACUDAFITS: 1972-74 CHARGERFITS: 1972-74 ROADRUNNER / SATELLITE

RH / 1971-74 DODGE & PLYMOUTH B-BODY REAR FRAME RAIL-REAR SECTION

50 IN. LONG FROM THE REAR CROSS MEMBER FORWARD, SLEEVES INTO EXISTING FRAME RAIL. (this is not a cap)FITS: 1971-74 CHARGER FITS: 1971-74 ROADRUNNER / GTX / SATELLITE

LH / 1971-74 DODGE & PLYMOUTH B-BODY REAR FRAME RAIL-REAR SECTION

50 IN. LONG FROM THE REAR CROSS MEMBER FORWARD, SLEEVES INTO EXISTING FRAME RAIL. (this is not a cap)FITS: 1971-74 CHARGER FITS: 1971-74 ROADRUNNER / GTX / SATELLITE

1970-71 DODGE & PLYMOUTH B & E-BODY & 1970-76 A-BODY BATTERY TRAY HOLD DOWN KIT

SOLD AS A KIT, INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1970-71 CHARGERFITS: 1970-71 ROADRUNNER-SATELLITE-GTXFITS: 1970 CORONETFITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 DART & SWINGERFITS: 1971-76...

1973-1974 DODGE CHARGER REAR VALANCE (with tips)

Often bent and rusted, our valance panels are complete OE style and are direct replacements of originals. Made to original thickness from durable steel and EDP coated for corrosion resistance. FITS: 1973-1974 DODGE CHARGER

1973-1974 DODGE CHARGER REAR VALANCE (w/o tips)

Often bent and rusted, our valance panels are complete OE style and are direct replacements of originals. Made to original thickness from durable steel and EDP coated for corrosion resistance. FITS: 1973-1974 DODGE CHARGER

1971-1972 DODGE CHARGER REAR VALANCE (with tips)

Often bent and rusted, our valance panels are complete OE style and are direct replacements of originals. Made to original thickness from durable steel and EDP coated for corrosion resistance. FITS: 1971-1972 DODGE CHARGER

1971-74 DODGE & PLYMOUTH B-BODY FOUR SPEED SHIFTER TUNNEL (bench seat)

FOR CARS WITHOUT CENTER CONSOLE. PRE-DRILLED FOR SHIFTER BOOT AND BEZEL.FITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

1970-74 E-BODY & 1971-72 B-BODY FOUR SPEED SHIFTER TUNNEL (bucket seats)

SHIFT TUNNEL WELDS TO THE MAIN FLOOR PAN, PRE-DRILLED FOR SHIFTER BOOT AND BEZEL.FITS: 1970-74 BARRACUDA FITS: 1970-74 CHALLENGERFITS: 1971-72 CHARGER / SUPERBEE (with console)FITS: 1971-72 ROADRUNNER / GTX / SATELLITE (with console)

RH / 1971-1973 DODGE & PLYMOUTH B-BODY TRUNK FLOOR HALVE

Our trunk floor halves are a good solution if you need to repair a trunk floor by installing the pieces through the trunk lid opening. Each half is cut from our OE style trunk floors and incorporates a lap seam to help join both sections.FITS: 1971-1973...

LH / 1971-1973 DODGE & PLYMOUTH B-BODY TRUNK FLOOR HALVE

Our trunk floor halves are a good solution if you need to repair a trunk floor by installing the pieces through the trunk lid opening. Each half is cut from our OE style trunk floors and incorporates a lap seam to help join both sections.FITS: 1971-1973...

RH / 1971-1974 DODGE & PLYMOUTH B-BODY REAR FLOOR PAN

THIS AMD REAR FOOTWELL IS THE FLOOR SECTION LOCATED BEHIND THE FRONT SEATS. THEY SPLIT OVER THE TUNNEL AND GO UNDER THE REAR SEAT TO FACTORY SEAMS.FITS: 1971 CHARGERFITS: 1971 ROADRUNNER / GTX / SATELLITE

LH / 1971-1974 DODGE & PLYMOUTH B-BODY REAR FLOOR PAN

THIS AMD REAR FOOTWELL IS THE FLOOR SECTION LOCATED BEHIND THE FRONT SEATS. THEY SPLIT OVER THE TUNNEL AND GO UNDER THE REAR SEAT TO FACTORY SEAMSFITS: 1971 CHARGERFITS: 1971 ROADRUNNER / GTX / SATELLITE

1970-71 CHALLENGER, 71 CHARGER 426-HEMI HOOD NAMEPLATE

ORIGINAL PART 9 3/8 LONG 7/8 TALL, HEMI IN RED LETTERS

RH / 1970-74 E-BODY & 1962-74 B-BODY UPPER SHOCK TOWER BRACE

MOUNTS TO THE FRAME RAIL AND INNER FENDER. HAS CONTROL BRACKET ATTACHED LIKE ORIGINAL.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER.FITS: 1962-74 DODGE & PLYMOUTH B-BODY

LH / 1970-74 E-BODY & 1962-74 B-BODY UPPER SHOCK TOWER BRACE

MOUNTS TO THE FRAME RAIL AND INNER FENDER. HAS CONTROL BRACKET ATTACHED LIKE ORIGINAL.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER.FITS: 1962-74 DODGE & PLYMOUTH B-BODY

1971-72 B-BODY & 1970-74 E-BODY RADIATOR SUPPORT EXTENSION

THIS DIE STAMPED PART WILL PERMIT THE CONVERSION FROM A 22 INCH RADIATOR TO A 26 INCH RADIATOR BY REMOVING YOUR EXISTING SUPPORT ON THE PASSENGER SIDE. DRILLING AND WELDING REQUIRED FOR OE APPEARANCE.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDAFITS:...

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1970-1972 DODGE & PLYMOUTH B-BODY & 1970-1974 E-BODY BATTERY TRAY

FITS: 1970-74 BARRACUDA FITS: 1970-74 CHALLENGERFITS: 1970-72 CHARGERFITS: 1970-72 ROADRUNNER-SATELLITE-GTX-BELVEDEREFITS: 1970-72 CORONET

RH / 1971-74 DODGE & PLYMOUTH B-BODY REAR SPRING PERCH-REAR SECTION

USA MADE HEAVY GAUGE. ATTACHES IN THE CORNER OF THE REAR FRAME RAIL AND REAR CROSS MEMBER, 9 INCHES LONGFITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

LH / 1971-74 DODGE & PLYMOUTH B-BODY REAR SPRING PERCH-REAR SECTION

USA MADE HEAVY GAUGE. ATTACHES IN THE CORNER OF THE REAR FRAME RAIL AND REAR CROSS MEMBER, 9 INCHES LONGFITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

RH / 1971-74 CHARGER OUTER SLIP-ON ROCKER

HANDFORMED, SAME WIDTH AS DOOR

DODGE & PLYMOUTH ANTENNA GASKET-EACH

APPLICATIONS:67-74 Dodge Dart, 64 330, Polara, 440, 65-70 Charger, 68 Super Bee, 69 Daytona, 70-74 Challenger, 71-74 Swinger, 67-74 Plymouth Valiant, Barracuda, 64 Fury, 65-70- Bevedere, Satellite, 67-70 Gtx, 68-70 Road Runner, 70-74 Duster, Cuda, 71-74...

1967-76 DODGE & PLYMOUTH BUMPER BOLT SET (8 bolts)

Don't ruin the look of your restoration by trying to reuse old, rusted hardware that not only looks bad, but could also be a safety hazard. ABS bumper mounting bolts are precision-manufactured from steel with a stainless steel cap.*8 Bolts, 8 Flat...

1971-74 DODGE & PLYMOUTH FRONT WINDSHIELD CLIP SET

REPRODUCTION CLIPS FOR ATTACHING THE MOLDINGS THAT SURROUND THE FRONT WINDSHIELD. 20PCS SCREWS INCLUDED.FITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / SATELLITE / GTX / BELVEDERE

DODGE & PLYMOUTH GAS TANK GROMMET-SEE NOTES FOR FIT

(tank to fill tube)NOT INCLUDED WITH OUR GAS TANKS, THIS GROMMET IS NECESSARY WHENREPLACING YOUR GAS TANK.FITS: 1967-76 A-BODYFITS: 1966-69 B-BODY (except 1970 b-body)FITS: 1971-74 B-BODYFITS: 1965-74 C-BODY(will work for 1963-65 b-body)

1974-76 DODGE & PLYMOUTH B-BODY GAS TANK WITHOUT NECK

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1972-1973 DODGE & PLYMOUTH B-BODY 4 FRONT VENT PIPES

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1971-72 DODGE & PLYMOUTH B-BODY WITH 4 SIDE VENT PIPES

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1973-74 DODGE CHARGER BODY PLUG KIT

TEMPORARILY OUT OF STOCKKITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR...

1971-72 DODGE & PLYMOUTH B-BODY PLUG KIT

KITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR.FITS: 1971-72 CHARGERFITS:...

1971 CHARGER & PLYMOUTH B-BODY BUMPER KIT (with hood wedges)

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1972 DODGE & PLYMOUTH B-BODY BUMPER KIT (with hood wedges)

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1973-74 CHARGER BODY BUMPER KIT (with hood wedges)

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1972 CHARGER & PLYMOUTH B-BODY BUMPER KIT (w/o hood wedges)

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

RH / 1971-72 CHARGER QUARTER PANEL INNER EXTENSION

IF YOU'RE REPAIRING RUST IN THE AREA BEHIND THE REAR WHEELS YOU WILL NEED THIS ITEM. IT NESTS INTO THE BACK EDGE OF THE QUARTER PANEL AND IS USUALLY RUSTED.ALSO USE, 872-2671-1 RH & 872-2671 RH.FITS: 1971-72 CHARGER

LH / 1971-72 CHARGER QUARTER PANEL INNER EXTENSION

IF YOU'RE REPAIRING RUST IN THE AREA BEHIND THE REAR WHEELS YOU WILL NEED THIS ITEM. IT NESTS INTO THE BACK EDGE OF THE QUARTER PANEL AND IS USUALLY RUSTED.ALSO USE, 872-2671-1 LH & 872-2671 LH.FITS: 1971-72 CHARGER

RH / 1971-72 CHARGER QUARTER PANEL INNER REINFORCEMENT

IF YOU'RE REPAIRING RUST IN THE AREA BEHIND THE REAR WHEELS YOU WILL NEED THIS ITEM. IT NESTS INTO THE BACK EDGE OF THE QUARTER PANEL AND IS USUALLY RUSTED.ALSO USE, 872-2671-1 RH & 872-2671-2 RH.FITS: 1971-72 CHARGER