SEARCH BY CATEGORY

RH / 1971-1974 CHARGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1971-1974 CHARGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

1966-1967 CHARGER & 1969 CORONET BACK UP LENSE (sold as each)

NEW DETAILED REPRODUCTION. ORDER 2 PER CAR.FITS: 1966-1967 CHARGERFITS: 1969 CORONET

1966-70 DODGE & PLYMOUTH B-BODY FOUR SPEED SHIFTER TUNNEL

PRE-DRILLED FOR SHIFTER BOOT AND BEZEL.FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / BELVEDERE / GTX / SATELLITEFITS: 1966-70 CORONET

RH / 1966-70 DODGE & PLYMOUTH B-BODY FRONT INNER FENDER

FITS: 1966-70 CHARGERFITS: 1966-70 CORONETFITS: 1966-70 ROADRUNNER / BELVEDERE / GTX / SATELLITE

1966-70 DODGE & PLYMOUTH B-BODY FRONT INNER FENDERS (sold as a pair)

FITS: 1966-70 CHARGERFITS: 1966-70 CORONETFITS: 1966-70 ROADRUNNER / BELVEDERE / GTX / SATELLITE

LH / 1966-70 DODGE & PLYMOUTH B-BODY FRONT INNER FENDER

FITS: 1966-70 CHARGERFITS: 1966-70 CORONETFITS: 1966-70 ROADRUNNER / BELVEDERE / GTX / SATELLITE

RH / 1968-1970 CHARGER REAR QUARTER-FRONT SECTION

DIE FORMED HIGHLY DETAILED REPRODUCTION PATCH PANEL30 INCHES TALL X 33 WIDEFITS: 1968-1970 DODGE CHARGER

LH / 1968-1970 CHARGER REAR QUARTER-FRONT SECTION

DIE FORMED HIGHLY DETAILED REPRODUCTION PATCH PANEL LOCATED BETWEEN THE DOOR & REAR TIRE,30 IN. TALL X 33 IN. WIDEFITS: 1968-1970 DODGE CHARGER

1971-74 DODGE & PLYMOUTH B-BODY DOOR WEATHERSTRIP (pair)

NEW REPRODUCTION GASKETS WITH CLIPS AND ONE MOLDED END.DOOR END CAP SOLD SEPARATE.FITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE* 2 door hardtop

1966-70 B-BODY & 1967-72 A-BODY STARTER SPLASH SHIELD

Almost always rusted and in need of repair. Our starter splash shields are a faithful reproduction of the original part. Made from heavy gauge sheet metal on new AMD tooling. Each piece features correct as original rubber seal.FITS: 1966-70...

RH / 1971-1974 CHARGER REAR OUTER WHEELHOUSE

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1971-1974 CHARGER

LH / 1971-1974 CHARGER REAR OUTER WHEELHOUSE

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1971-1974 CHARGER

RH / 1971-1974 DODGE & PLYMOUTH B-BODY LOWER DOOR HINGE

FITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

LH / 1971-1974 DODGE & PLYMOUTH B-BODY LOWER DOOR HINGE

FITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

RH / 1971-1974 DODGE & PLYMOUTH B-BODY UPPER DOOR HINGE

FITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

LH / 1971-1974 DODGE & PLYMOUTH B-BODY UPPER DOOR HINGE

FITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

1971-74 DODGE & PLYMOUTH B-BODY DOOR HINGE SET (4 piece set)

FITS: 1971-74 CHARGERFITS: 1971-74 ROADRUNNER / GTX / SATELLITE

1968-1970 CHARGER DECK FILLER LOWER PLENUM

Panel is complete as OE. Fits under deck filler panelFITS: 1968-70 CHARGER

1968-1970 CHARGER LOWER REAR WINDOW FRAME

EDP COATED. USE THIS PANEL WHEN REPLACING DECK FILLER PANEL OR PACKAGE TRAYFITS: 1968-70 CHARGER

1968-70 CHARGER PACKAGE TRAY

*

1969 A-BODY & B-BODY FRONT / REAR SIDE MARKER LENSE SET (4pcs)

FITS: 1969 A-BODYFITS: 1969 B-BODY

1970-74 E-BODY & 1971-72 B-BODY TORSION BAR CROSSMEMBER

It is important this item be in good shape as it is a major component on the front of the body. Has the same metal thickness as OE and the area holding the torsion bars will accept stock size bars as original. Our crossmember is a reproduction of the...

1970-74 E-BODY & 1971-72 B-BODY INNER FENDER COVER PLATE (sold as a pair)

FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGERFITS: 1971-72 ROADRUNNER / SATELLITE / GTXFITS: 1971-72 CHARGER

1966-70 DODGE & PLYMOUTH B-BODY FLOOR WIRING COVER 4 PIECE SET

FITS: 1966-70 CHARGER FITS: 1966-70 CORONETFITS: 1966-70 ROADRUNNER / GTX / SATELLITE/ BELVEDERE

1968-70 CHARGER ROOF INNER STRUCTURE, REAR BOW

FITS ABOVE BACK GLASS UNDER ROOF

1968-1970 DODGE & PLYMOUTH B-BODY ROOF DRIP RAILS STEEL (sold as a pair)

THE METAL RAIL TO WHICH THE MOLDING ATTACHES, USE WHEN REPLACING ROOF SKIN. THIS IS NOT THE TRIM!FITS: 1968-1970 CHARGERFITS: 1968-1970 CORONETFITS: 1968-1970 ROADRUNNER / GTX / SATELLITE/ BELVEDERE

1968-1970 CHARGER OUTER ROOF SKIN

SHIPS TRUCK FREIGHTIt is often easier to replace a roof skin than to repair rusted areas. If you have rust under a vinyl top this part is a real time saver. Made to OE specification, this skin covers the entire roof area and mates to the A...

1972-76 A-BODY / 1972-74 E & B-BODY & 1981-93 DODGE TRUCK SIDE MARKER LIGHT SET (4 piece set)

FITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

1967-72 DODGE & PLYMOUTH A-BODY REAR CROSSMEMBER ENDS (sold as a pair)

SOLD AS A PAIR ONLYFITS: 1967-69 BARRACUDA FITS: 1967-72 DARTFITS: 1971-72 SCAMP FITS: 1970-72 DUSTER/1971-72 DEMON

1967-72 DODGE & PLYMOUTH A-BODY REAR CROSSMEMBER

REPRODUCTION REAR CROSS MEMBER LOCATED AT THE BACK EDGE OF THE TRUNK FLOOR.FITS: 1967-69 BARRACUDA FITS: 1967-72 DARTFITS: 1971-72 SCAMP FITS: 1970-72 DUSTERFITS: 1971-72 DEMON

1972-76 A-BODY,1972-74 E & B-BODY,1981-93 DODGE TRUCK REAR SIDE MARKER LIGHT-RED

ORDER 2 PER CARFITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

RH / 1967-1974 DODGE & PLYMOUTH A-BODY & 1966-1970 B-BODY LOWER DOOR HINGE

FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDEREFITS: 1966-70 CORONETFITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 SCAMP

LH / 1967-1974 DODGE & PLYMOUTH A-BODY & 1966-1970 B-BODY LOWER DOOR HINGE

FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDEREFITS: 1966-70 CORONETFITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 SCAMP

RH / 1966-70 DODGE & PLYMOUTH B-BODY UPPER DOOR HINGE

FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDEREFITS: 1966-70 CORONET

LH / 1966-70 DODGE & PLYMOUTH B-BODY UPPER DOOR HINGE

FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDEREFITS: 1966-70 CORONET

1966-70 DODGE & PLYMOUTH B-BODY DOOR HINGE SET (4 piece set)

FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDEREFITS: 1966-70 CORONET

1972-76 A-BODY,1972-74 E & B-BODY,1981-93 DODGE TRUCK FRONT SIDE MARKER LIGHT (sold as each)

FITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

1968-70 CHARGER TRUNK FLOOR TO REAR VALANCE BRACKETS (sold as a pair)

Mount between the tail light panel and trunk floor. Use when replacing a trunk floor.

1966-70 DODGE & PLYMOUTH B-BODY K-MEMBER TO RADIATOR BRACE

FITS: 1966-70 CHARGERFITS: 1966-70 CORONETFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

RH / 1968-1970 DODGE & PLYMOUTH B-BODY FULL REPLACEMENT REAR FRAME RAIL

SHIPS TRUCK FREIGHTMade from quality heavy gauge steel, each piece is built to original OE specs and has been test fitted by the restoration professionals at Auto Metal Direct.FITS: 1968-70 CHARGERFITS: 1968-70 CORONETFITS: 1968-70 ROADRUNNER / SATELITE...

LH / 1968-1970 DODGE & PLYMOUTH B-BODY FULL REPLACEMENT REAR FRAME RAIL

SHIPS TRUCK FREIGHTMade from quality heavy gauge steel, each piece is built to original OE specs and has been test fitted by the restoration professionals at Auto Metal Direct.FITS: 1968-70 CHARGERFITS: 1968-70 CORONETFITS: 1968-70 ROADRUNNER / SATELITE...

1966-70 DODGE & PLYMOUTH B-BODY CONSOLE BRACKET SET (manual transmission)

NEW DIE STAMPED 3 PIECE SET.FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER / GTX / SATELLITE

1966-70 DODGE & PLYMOUTH B-BODY CONSOLE BRACKET SET (automatic transmission)

NEW DIE STAMPED 3 PIECE SET.FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

1970-74 E-BODY & 1971-74 B-BODY CONSOLE BRACKET SET MANUAL

MANUAL TRANSMISSION, 2 PIECE SETFITS: 1970-74 BARRACUDA & CHALLENGER FITS: 1971-74 CHARGER FITS: 1971-74 ROADRUNNER / GTX / SATELLITE

1970-74 E-BODY & 1971-74 B-BODY CONSOLE BRACKET SET AUTOMATIC

AUTOMATIC TRANSMISSION, 3 PIECE SETFITS: 1970-74 BARRACUDA & CHALLENGERFITS: 1971-74 CHARGER FITS: 1971-74 ROADRUNNER / GTX / SATELLITE

1968-70 DODGE B-BODY REAR FENDER SPLASH SHIELD SET (pair)

THESE SHIELDS KEEP THE MUD AND DEBRIS FROM ENTERING THE DOOR HINGE AREA.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET

1971-74 CHARGER TRUNK WEATHERSTRIP GUTTER SET

USE WHEN REPLACING QUARTER PANELS, ATTACHES TO THE TOP OF THE QUARTER PANEL IN THE TRUNK OPENING TO CREATE THE WEATHERSTRIP CHANNEL. SOLD AS A 2 PIECE SET.

RH / 1971-74 CHARGER TRUNK WEATHERSTRIP GUTTER

USE WHEN REPLACING QUARTER PANELS, ATTACHES TO THE TOP OF THE QUARTER PANEL IN THE TRUNK OPENING TO CREATE THE WEATHERSTRIP CHANNEL.FITS: 1971-74 CHARGER

LH / 1971-74 CHARGER TRUNK WEATHERSTRIP GUTTER

USE WHEN REPLACING QUARTER PANELS, ATTACHES TO THE TOP OF THE QUARTER PANEL IN THE TRUNK OPENING TO CREATE THE WEATHERSTRIP CHANNEL.FITS: 1971-74 DODGE CHARGER

RH / 1971-1974 DODGE & PLYMOUTH B-BODY REAR INNER WHEELHOUSE

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...

LH / 1971-1974 DODGE & PLYMOUTH B-BODY REAR INNER WHEELHOUSE

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...