SEARCH BY CATEGORY

1971 PLYMOUTH CUDA FRONT FENDER SIDE ORNAMENT KIT

KIT INCLUDES: SET OF 8 LOUVERS, 4 MOUNTING BRACKETS, 8 GASKETS, AND 16 NUTS TO MOUNT THE FENDER LOUVERS.FITS: 1971 PLYMOUTH CUDA

1970-1974 BARRACUDA FUEL FILLER NECK

NEW REPRODUCTION OF THE ORIGINAL FILLER NECK USED ON ALL BARRACUDA HARDTOP AND CONVERTIBLES.FITS: 1970-1974 BARRACUDA

1967-72 DODGE & PLYMOUTH A-BODY DOOR LOCK PILLAR SEALS (except duster & demon)

NEW REPRODUCTION DOOR JAMB RUBBER SEALS WITH STEEL CORE LIKE ORIGINAL. ALSO KNOWN AS U-JAMB SEALS, SOLD AS A PAIR LH & RH WITHOUT ATTACHING HARDWARE. FITS: 1967-72 DARTFITS: 1971-72 SCAMPFITS: 1967-69 BARRACUDAFITS: 1967-72 VALIANT*2 door hardtop...

1970-74 BARRACUDA & CHALLENGER DOOR LOCK PILLAR SEAL

NEW REPRODUCTION DOOR JAMB RUBBER SEALS WITH STEEL CORE LIKE ORIGINAL. ALSO KNOWN AS U-JAMB SEALS, SOLD AS A PAIR LH & RH WITH ATTACHING HARDWARE. FITS: 1970-74 BARRACUDA FITS: 1970-74 CHALLENGER*2 door hardtop & convertible

1970-74 BARRACUDA OUTSIDE DOOR HANDLES (sold as a pair)

NEW REPRODUCTION KIT INCLUDES GASKETS.FITS: 1970-74 BARRACUDA

1970-1974 BARRACUDA VINYL TOP MOLDING SET

Nice reproduction of the moldings separating the vinyl top from the painted body panels. Does not include clips.FITS: 1970-1974 BARRACUDA

1967-1968 BARRACUDA FISH IN THE CIRCLE, TRUNK AND HOOD (sold as each)

REPRODUCTION FISH IN THE CIRCLE, LOCATED ON THE TRUNK AND ON THE HOOD, 2 PER CARFITS: 67-68 BARRACUDA

1970 BARRACUDA HOOD RELEASE LATCH ASSEMBLY

NEW DETAILED REPRODUCTION HOOD RELEASE AND SUPPORTFITS: 1970 BARRACUDA*2 door hardtop & convertible

1970-74 BARRACUDA & CHALLENGER HOOD LATCH SUPPORT BRACKET

NEW DETAILED REPRODUCTION HOOD LATCH SUPPORTFITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER*2 door hardtop & convertible

RH / 1970-74 BARRACUDA REAR FLOOR PAN

DIE STAMPED & HEAVY GAUGEGOOD FOR MINOR RUST REPAIR20 IN. WIDE X 21 IN. LONG*driver side is discontinued

RH / 1972-74 BARRACUDA OE STYLE REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

LH / 1972-74 BARRACUDA OE STYLE REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

RH / 1970-71 BARRACUDA OE STYLE REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

LH / 1970-71 BARRACUDA OE STYLE REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

RH / 1970-71 BARRACUDA REAR QUARTER SKIN

SHIPS TRUCK FREIGHTAMD quarter panel skins are the highest quality on the market. They are cut from full OE style panels so they extend to all mating surfaces including door jamb, wheel house and tail light/valance panel area. Top edge of panel bends...

LH / 1970-71 BARRACUDA REAR QUARTER SKIN

SHIPS TRUCK FREIGHTAMD quarter panel skins are the highest quality on the market. They are cut from full OE style panels so they extend to all mating surfaces including door jamb, wheel house and tail light/valance panel area. Top edge of panel bends...

RH / 1962-66 DODGE & PLYMOUTH A-BODY REAR FLOOR PAN

DIE FORMED 18 GAUGE STEEL. 24 INCHES LONG FROM THE FRONT OF THE REAR SEAT. THIS REAR FLOOR PAN PATCH IS USA MADE AND DIE STAMPED.EXACT REPRODUCTION FROM A PLYMOUTH BARRACUDA THIS WILL BE SHORT 3 INCHES AT THE BACK EDGE OF THE DART.YOU CAN EITHER TRIM AT...

LH / 1962-66 DODGE & PLYMOUTH A-BODY REAR FLOOR PAN

DIE FORMED 18 GAUGE STEEL. 24 INCHES LONG FROM THE FRONT OF THE REAR SEAT. THIS REAR FLOOR PAN PATCH IS USA MADE AND DIE STAMPED.EXACT REPRODUCTION FROM A PLYMOUTH BARRACUDA THIS WILL BE SHORT 3 INCHES AT THE BACK EDGE OF THE DART.YOU CAN EITHER TRIM AT...

1967-70 A-BODY & 1968-70 B-BODY CHROME OUTSIDE DOOR HANDLE ASSEMBLY (pair)

NEW REPRODUCTION OUTSIDE DOOR HANDLE ASSEMBLIES COME COMPLETE WITH CHROME PUSH BUTTONS AND GASKETS.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET & SUPERBEEFITS: 1968-70 ROADRUNNER-GTX-SATELLITEFITS: 1967-70 DART & SWINGERFITS: 1967-69 BARRACUDAFITS: 1970...

1963-66 DODGE & PLYMOUTH A-BODY OUTSIDE DOOR HANDLE ASSEMBLY (pair)

NEW CHROME REPRODUCTION OUTSIDE DOOR HANDLE ASSEMBLIES COMPLETE WITH CHROME PUSH BUTTONS AND GASKETS.FITS: 1964-66 BARRACUDAFITS: 1963-66 VALIANTFITS: 1963-66 DART

1962-1966 DODGE & PLYMOUTH A-BODY COMPLETE FLOOR PAN KIT-4 PIECES

FOR ALL HARDTOP, SEDAN, CONVERTIBLE 2 & 4 DOOR MODELS INCLUDING WAGONS. FITS: 1963-1966 DARTFITS: 1962-1966 VALIANTFITS: 1964-1966 BARRACUDAFITS: 1962 LANCERNote: When floors are installed there will be a 3 inch gap between front and rear sections...

RH / 1962-66 DODGE & PLYMOUTH A-BODY FRONT FLOOR PAN

DIE FORMED 18 GAUGE STEEL. 30 IN. LONG.FRONT FLOOR PANEL GIVES YOU ABOUT 6 INCHES OF TOEBOARD AND CURLS INTO THE CENTER TUNNEL.THIS PANEL NEEDS 1 1/2 INCHES TRIMMED OFF THE FLANGE ON THE ROCKER SIDE. MUST REUSE EXISTING BRACKETSFITS: 1963-66 DARTFITS:...

LH / 1962-66 DODGE & PLYMOUTH A-BODY FRONT FLOOR PAN

DIE FORMED 18 GAUGE STEEL. 30 IN. LONG.FRONT FLOOR PANEL GIVES YOU ABOUT 6 INCHES OF TOEBOARD AND CURLS INTO THE CENTER TUNNEL.THIS PANEL NEEDS 1 1/2 INCHES TRIMMED OFF THE FLANGE ON THE ROCKER SIDE. MUST REUSE EXISTING BRACKETSFITS: 1963-66 DARTFITS:...

RH / 1971-74 B-BODY AND E-BODY FRONT FLOOR REPAIR SECTION

THIS FRONT FLOOR COVER FROM THE GAS PEDAL TO THE FRONT EDGE OF THE FRONT SEAT. USA MADEFITS: 1970-74 CHALLENGERFITS: 1970-74 CUDA FITS: 1971-74 CHARGER / SUPERBEEFITS: 1971-74 ROADRUNNER / SATELLITE / GTX

LH / 1971-74 B-BODY AND E-BODY FRONT FLOOR REPAIR SECTION

FRONT FLOOR SECTION COVERS FROM THE GAS PEDAL TO THE FRONT EDGE OF THE FRONT SEAT USA MADE.FITS: 1970-74 CHALLENGERFITS: 1970-74 CUDA FITS: 1971-74 CHARGER / SUPERBEEFITS: 1971-74 ROADRUNNER / SATELLITE / GTX

1967-76 DODGE & PLYMOUTH A-BODY DOOR SILL PLATES (sold as a pair)

DIE STAMPED ALUMINUM FLAT FINISH, INCLUDES FASTENERS. ATTACHES TO THE FLOOR WIRE COVER AND HOLDS DOWN THE OUTER EDGE OF THE CARPET IN THE DOOR OPENING.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMPFITS: 1971-72 DODGE...

1967-76 DODGE & PLYMOUTH A-BODY FOUR SPEED SHIFTER TUNNEL

FOR MODELS WITH OR WITHOUT CONSOLE. PRE-DRILLED HOLES FOR SHIFTER BOOT AND BEZEL.FITS: 1967-76 DART & DART SPORTFITS: 1970-76 DUSTERFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMPFITS: 1973-76 DODGE DART SPORTFITS: 1971-72 DODGE DEMON

1967-1976 DODGE & PLYMOUTH UPPER COWL PLENUM

NEW EDP COATED REPRODUCTION UPPER COWL PLENUM. ATTACHES BELOW THE UPPER COWL VENT PANEL.FITS: 1967-1976 DART FITS: 1967-1976 DART SPORTFITS: 1967-1969 BARRACUDAFITS: 1971-1976 SCAMPFITS: 1967-1976 VALIANT

1967-1976 DODGE & PLYMOUTH UPPER COWL VENT PANEL

NEW EDP COATED REPRODUCTION UPPER COWL PANEL.FITS: 1967-1976 DART FITS: 1967-1976 DART SPORTFITS: 1967-1969 BARRACUDAFITS: 1971-1976 SCAMPFITS: 1967-1976 VALIANT

1964-66 BARRACUDA ROOFRAIL WEATHERSTRIP (sold as a pair)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1964-66 BARRACUDA FASTBACK

1967-69 BARRACUDA ROOFRAIL WEATHERSTRIP

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1967-69 BARRACUDA*fastback & notchback

RH / 1967-1974 DODGE & PLYMOUTH A-BODY FRONT INNER FENDER

HEAVY GAUGE COMPLETE FULL REPLACEMENT REPRODUCTIONFITS: 1967-74 DARTFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-74 SCAMP

1967-1974 DODGE & PLYMOUTH A-BODY FRONT INNER FENDERS (sold as a pair)

KIT INCLUDES BOTH LH & RH PAIRHEAVY GAUGE COMPLETE FULL REPLACEMENT REPRODUCTIONFITS: 1967-74 DARTFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDA FITS: 1971-74 SCAMP

LH / 1967-1974 DODGE & PLYMOUTH A-BODY FRONT INNER FENDER

HEAVY GAUGE COMPLETE FULL REPLACEMENT REPRODUCTIONFITS: 1967-74 DARTFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-74 SCAMP

RH / 1967-76 DODGE & PLYMOUTH A-BODY INNER FENDER TO FIREWALL BRACKET

EDP COATED & HEAVY GAUGE 2 PIECE FILLER PANEL USED TO ATTACH THE FULL FRONT INNER FENDER (MP-399OE) TO THE COWL PANEL.FITS: 1967-76 DARTFITS: 1970-76 DUSTERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMP

LH / 1967-76 DODGE & PLYMOUTH A-BODY INNER FENDER TO FIREWALL BRACKET

EDP COATED & HEAVY GAUGE 2 PIECE FILLER PANEL USED TO ATTACH THE FULL FRONT INNER FENDER (MP-399OE) TO THE COWL PANEL.FITS: 1967-76 DARTFITS: 1970-76 DUSTERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMP

1967-1976 DODGE & PLYMOUTH A-BODY TORSION BAR CROSSMEMBER

It is important this item be in good shape as it is a major component on the front of the body. Our crossmember has the same metal thickness as OE and the area holding the torsion bars will accept stock size bars as original.FITS: 1967-76 DART &...

1966-70 B-BODY & 1967-72 A-BODY STARTER SPLASH SHIELD

Almost always rusted and in need of repair. Our starter splash shields are a faithful reproduction of the original part. Made from heavy gauge sheet metal on new AMD tooling. Each piece features correct as original rubber seal.FITS: 1966-70...

RH / 1967-1976 DODGE & PLYMOUTH OUTER WHEELHOUSE (including demon)

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1967-69 BARRACUDAFITS: 1970-76...

LH / 1967-1976 DODGE & PLYMOUTH OUTER WHEELHOUSE (including demon)

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1967-69 BARRACUDAFITS: 1970-76...

RH / 1967-76 DODGE & PLYMOUTH A-BODY REAR INNER WHEELHOUSE

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...

LH / 1967-76 DODGE & PLYMOUTH A-BODY REAR INNER WHEELHOUSE

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...

1969 A-BODY & B-BODY FRONT / REAR SIDE MARKER LENSE SET (4pcs)

FITS: 1969 A-BODYFITS: 1969 B-BODY

1970-74 CHALLENGER & BARRACUDA UPPER REAR SHOCK MOUNT SUPPORT

NEW HEAVY GAUGE EDP COATED REPRODUCTIONFITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

1970-74 E-BODY & 1971-72 B-BODY TORSION BAR CROSSMEMBER

It is important this item be in good shape as it is a major component on the front of the body. Has the same metal thickness as OE and the area holding the torsion bars will accept stock size bars as original. Our crossmember is a reproduction of the...

1970-74 E-BODY & 1971-72 B-BODY INNER FENDER COVER PLATE (sold as a pair)

FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGERFITS: 1971-72 ROADRUNNER / SATELLITE / GTXFITS: 1971-72 CHARGER

1967-76 DODGE & PLYMOUTH A-BODY FLOOR WIRING COVER SET

You will almost always need these pieces when replacing a floor pan. They are usually rusted and often break when removed. Our set includes all the pieces required to make a nice installation.FITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72...

1970-74 CHALLENGER & BARRACUDA REAR FLOOR PAN REINFORCEMENT BRACKETS (sold as a pair)

Mounts between floor pan and inner side panel. Use when replacing rear floor pan.

1972-76 A-BODY / 1972-74 E & B-BODY & 1981-93 DODGE TRUCK SIDE MARKER LIGHT SET (4 piece set)

FITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

RH / 1971-74 PLYMOUTH BARRACUDA DOOR WINDOW REGULATOR

NEW REPRODUCTIONFITS: 1971-74 BARRACUDA HARDTOP/CONVERTIBLE

LH / 1971-74 PLYMOUTH BARRACUDA DOOR WINDOW REGULATOR

NEW REPRODUCTIONFITS: 1971-74 BARRACUDA HARDTOP/CONVERTIBLE

RH / 1970 PLYMOUTH BARRACUDA DOOR WINDOW REGULATOR

NEW REPRODUCTIONFITS: 1970 BARRACUDA HARDTOP/CONVERTIBLE