SCAMP

1967-76 DODGE & PLYMOUTH A-BODY UNDER REAR SEAT FLOOR PAN

SHIPS TRUCK FREIGHTFits under rear seat area, over the top of the axle housing and connects to the rear of the trunk floor pan. Includes emergency brake, rear seat, rear seat belt, exhaust hanger and pinion snubber brackets welded into place where...

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1967-74 DODGE & PLYMOUTH A-BODY / 1966-70 B-BODY & 1970-74 E-BODY DOOR HINGE REBUILD KIT

INCLUDES: 1 pin 3 1/2 INCHES LONG, 1 pin 2 1/2 INCHES LONG AND 4 STANDARD BUSHINGS.FITS: 1967-74 A-BODYFITS: 1966-70 B-BODYFITS: 1970-74 E-BODY*mopars did not come with bushings so some drilling may be required for installation.

1967-76 DODGE & PLYMOUTH A-BODY BATTERY TRAY

REPRODUCTION BATTERY TRAY.FITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 PLYMOUTH SCAMP

1968-76 DART / 1971-76 SCAMP & 1968-69 BARRACUDA FRONT WINDSHIELD GASKET (2 door hardtop)

NEW REPRODUCTION GASKET ACCEPTS ORIGINAL AND REPRODUCTION REVEAL MOLDINGS.FITS: 1968-76 DARTFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA (fastback & notchback)FITS: 1971-75 VALIANT*2 door hardtop without post between the door glass and quarter...

RH / 1970-76 DART SWINGER & 1971-76 SCAMP REAR QUARTER SKIN

SHIPS TRUCK FREIGHT, 28 IN. HIGH X 86 IN. LONGFITS: 1970-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP*MODIFY SIDE MARKER LAMP FOR 1972-76 MODELS

LH / 1970-76 DART SWINGER & 1971-76 SCAMP REAR QUARTER SKIN

SHIPS TRUCK FREIGHT, 28 IN. HIGH X 86 IN. LONGFITS: 1970-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP*MODIFY SIDE MARKER LAMP FOR 1972-76 MODELS

1967-1976 DODGE DART & 1971-1976 SCAMP DECK FILLER PANEL (2 door hardtop)

FACTORY STYLE PANEL LOCATED BETWEEN THE REAR WINDOW AND TRUNK LIDEDP COATEDFITS: 1967-76 DODGE DART-SWINGER HARDTOPFITS: 1971-76 PLYMOUTH SCAMP

RH / 1967-76 DODGE DART & 1971-76 SCAMP DECK FILLER-INNER/LOWER SUPPORT

DIE FORMED AND EDP COATEDLOCATED IN EACH LOWER CORNER OF THE DECK FILLER.FITS: 1967-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP

LH / 1967-76 DODGE DART & 1971-76 SCAMP DECK FILLER-INNER/LOWER SUPPORT

DIE FORMED AND EDP COATEDLOCATED IN EACH LOWER CORNER OF THE DECK FILLER.FITS: 1967-76 DART SWINGERFITS: 1971-76 PLYMOUTH SCAMP

RH / 1970-76 DUSTER & 71-76 SCAMP FRONT FENDER-LOWER REAR SECTION (without brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. 17 IN. HIGHFITS: 1970-76 DUSTERFITS: 1971-76 SCAMP

LH / 1970-76 DUSTER & 71-76 SCAMP FRONT FENDER-LOWER REAR SECTION (without brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. 17 IN. HIGHFITS: 1970-76 DUSTERFITS: 1971-76 SCAMP

RH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

LH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

RH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

LH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

RH / 1967-76 DODGE & PLYMOUTH A-BODY REAR LEAF SPRING MOUNT

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

LH / 1967-76 DODGE & PLYMOUTH A-BODY REAR LEAF SPRING MOUNT

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

RH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT SPRING PERCH

NEW HEAVY GAUGE EDP COATED REPRODUCTION AS ORIGINALFITS: 1967-76 DARTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

LH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT SPRING PERCH

NEW HEAVY GAUGE EDP COATED REPRODUCTION AS ORIGINALFITS: 1967-76 DARTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

DODGE & PLYMOUTH ANTENNA GASKET-EACH

APPLICATIONS:67-74 Dodge Dart, 64 330, Polara, 440, 65-70 Charger, 68 Super Bee, 69 Daytona, 70-74 Challenger, 71-74 Swinger, 67-74 Plymouth Valiant, Barracuda, 64 Fury, 65-70- Bevedere, Satellite, 67-70 Gtx, 68-70 Road Runner, 70-74 Duster, Cuda, 71-74...

1966-72 DODGE & PLYMOUTH A / B-BODY QUARTER WINDOW SEAL (pair)

FITS: 1967-69 BARRACUDA (convertible)FITS: 1967-72 DART / SWINGER / SCAMP (2 door hardtop & convertible)FITS: 1966-67 CHARGERFITS: 1966-67 BELVEDERE / SATELLITE / GTX (convertible)FITS: 1968-70 B-BODY (convertible)

MOPAR DOOR AND TRUNK LOCK GASKET SET-3 PCS

APPLICATIONS:66-70 Dodge Dart, 66-70 Plymouth Valiant, 66-69 Barracuda, 70 Duster 70-74 E Body

DODGE & PLYMOUTH DOOR HANDLE GASKETS (4 piece set)

FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER/ GTX / SATELLITE / BELVEDEREFITS: 1967-70 DART & SWINGERFITS: 1967-69 BARRACUDAFITS: 1970 DUSTER

1972-1973 DODGE & PLYMOUTH DOOR BUMPER SET (rectangular)

FITS: 1972-73 DARTFITS: 1972 DEMONFITS: 1973 DART SPORTFITS: 1972-73 SCAMPFITS: 1973 DUSTERFITS: 1973 BARRACUDA

1967-76 DODGE & PLYMOUTH BUMPER BOLT SET (8 bolts)

Don't ruin the look of your restoration by trying to reuse old, rusted hardware that not only looks bad, but could also be a safety hazard. ABS bumper mounting bolts are precision-manufactured from steel with a stainless steel cap.*8 Bolts, 8 Flat...

1971-74 DODGE & PLYMOUTH A-BODY HOOD SIDE BUMPER SET

FITS: 1971-74 DARTFITS: 1971-72 DEMONFITS: 1973 DART SPORTFITS: 1971-74 SCAMP

1973-76 DODGE & PLYMOUTH A-BODY DOOR WEATHERSTRIP (sold as a pair)

MOLDED DOOR SEALS WITH CLIPS AND MOLDED ENDS FOR 2 DOOR HARDTOP & COUPE.FITS: 1973-76 DART SPORTFITS: 1973-76 DUSTERFITS: 1973-76 DART SWINGERFITS: 1973-76 SCAMPFITS: 1973-76 VALIANT*for 2 door models with roll down quarter glass and pop-out models

1967-72 DODGE & PLYMOUTH A-BODY DOOR WEATHERSTRIP

CORRECT CLIPS & ONE MOLDED END WITH STEEL CORE. LH & RHFITS: 1967-72 DARTFITS: 1971-72 DEMONFITS: 1970-72 DUSTERFITS: 1971-72 SCAMPFITS: 1967-69 BARRACUDAFITS: 1967-72 VALIANT*for 2 door models with roll down quarter glass and pop-out models

1968-76 DART SWINGER / 1971-76 SCAMP & 1968-69 BARRACUDA FRONT WINDSHIELD CLIP SET

REPRODUCTION CLIPS FOR ATTACHING THE MOLDINGS THAT SURROUND THE FRONT WINDSHIELD. 23PCS SCREWS INCLUDEDFITS: 1968-76 DODGE DART & SWINGERFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA ALL*2 door hardtop & 2 /4 door sedan

DODGE & PLYMOUTH GAS TANK GROMMET-SEE NOTES FOR FIT

(tank to fill tube)NOT INCLUDED WITH OUR GAS TANKS, THIS GROMMET IS NECESSARY WHENREPLACING YOUR GAS TANK.FITS: 1967-76 A-BODYFITS: 1966-69 B-BODY (except 1970 b-body)FITS: 1971-74 B-BODYFITS: 1965-74 C-BODY(will work for 1963-65 b-body)

1963-76 DODGE & PLYMOUTH A-BODY 3/8" FUEL SENDING UNIT (w/ return line)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel pump sender assemblies meet or exceed the performance of the original equipment they replace.FITS: 1964-69 BARRACUDA FITS: 1963-76 DARTFITS: 1971-76...

1970-1974 DODGE & PLYMOUTH A-BODY FUEL FILLER TUBE TO TRUNK FLOOR SEAL

NEW CORRECT REPRODUCTION OF THE SEAL USED TO FILL AROUND THE FILLER NECK AT THE BASE OF THE TRUNK FLOOR.FITS: 1970-74 DART SWINGERFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1973-74 SCAMP

1971-76 DODGE & PLYMOUTH A-BODY WITH 1 FRONT VENT PIPE

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1970-71 DODGE & PLYMOUTH A-BODY GAS TANK (with eec)

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKET.16 GALLON W/EEC & 4 VENT LINESFITS: 1971 DEMONFITS: 1970-71 DUSTERFITS: 1970-71 DARTFITS: 1970-71 VALIANT

1968-76 DODGE DART & SCAMP REAR WINDOW GASKET (except dart sport)

THIS NEW RUBBER GASKET IS DESIGNED TO ACCEPT ORIGINAL AND REPRODUCTION REVEAL MOLDING.FITS: 1968-76 DODGE DART SWINGERFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-76 PLYMOUTH VALIANT* 2 door hardtop only ** 1967 models used reveal moldings that snap into the...

1973-76 DART SWINGER & SCAMP ROOF RAIL WEATHERSTRIP (2 door hardtop)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1973-76 DART SWINGERFITS: 1973-76 PLYMOUTH SCAMPFITS: 1973-76 VALIANT *w/o pop-out quarter glass

1967-72 DODGE & PLYMOUTH A-BODY ROOFRAIL WEATHERSTRIP (2 door hardtop)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1967-72 DART & SWINGERFITS: 1971-72 PLYMOUTH SCAMP FITS: 1967-69 VALIANT *w/o pop-out quarter window

1970-74 DODGE & PLYMOUTH A-BODY PLUG KIT

KITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR.FITS: 1970-74 DARTFITS:...

1973 DODGE & PLYMOUTH A-BODY BODY BUMPER KIT (hardtop only)

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1971 DODGE & PLYMOUTH A-BODY BODY BUMPER KIT

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1970-1972 DART & 1971-1972 SCAMP STEEL REAR VALANCE PANEL

Often bent and rusted, our valance panels are complete OE style and are direct replacements of originals. Made to original thickness from durable steel and EDP coated for corrosion resistance. FITS: 1970-1972 DART / SWINGERFITS: 1971-1972 SCAMP

1967-72 MOPAR A-BODY JACK BRACKET-3 PIECE SET

NEW DETAILED REPRODUCTION OF THE ORIGINAL FOR HARDTOP & CONVERTIBLESFITS: 1967-72 DART (except dart sport)FITS: 1967-69 BARRACUDAFITS: 1971 SCAMP

LH 1967-76 MOPAR A-BODY UPPER JACK BRACKET HOLD DOWN

NEW REPRODUCTION, HEAVY GAUGE LIKE ORIGINALFITS: 1967-76 DART & DART SPORTFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMP

1970-73 DART / 1971-73 SCAMP TRUNK LOCK SUPPORT

HEAVY GAUGE EDP COATED REPRODUCTIONFITS: 1970-73 DODGE DART SWINGERFITS: 1971-73 PLYMOUTH SCAMP

RH / 1968-72 DART & 1971-72 SCAMP QUARTER GLASS-TINTED

NEW REPRODUCTION2 DOOR HARDTOP & CONVERTIBLEFITS: 1968-72 DART (except dart sport)FITS: 1971-72 SCAMP

LH / 1968-72 DART & 1971-72 SCAMP QUARTER GLASS-TINTED

NEW REPRODUCTION2 DOOR HARDTOP & CONVERTIBLEFITS: 1968-72 DART (except dart sport)FITS: 1971-72 SCAMP

RH / 1968-72 DART & 1971-72 SCAMP QUARTER GLASS-CLEAR

NEW REPRODUCTION2 DOOR HARDTOP & CONVERTIBLEFITS: 1968-72 DART (except dart sport)FITS: 1971-72 SCAMP

LH / 1968-72 DART & 1971-72 SCAMP QUARTER GLASS-CLEAR

NEW REPRODUCTION2 DOOR HARDTOP & CONVERTIBLEFITS: 1968-72 DART (except dart sport)FITS: 1971-72 SCAMP

RH / 1967-1976 DART & 1971-1976 SCAMP DOOR LOCK PILLAR

USE WHEN REPLACING OE STYLE QUARTER OR QUARTER PANEL SKIN. FITS: 1967-76 DODGE DART-SWINGERFITS: 1971-76 PLYMOUTH SCAMP

LH / 1967-1976 DART & 1971-1976 SCAMP DOOR LOCK PILLAR

USE WHEN REPLACING OE STYLE QUARTER OR QUARTER PANEL SKIN. FITS: 1967-76 DODGE DART-SWINGERFITS: 1971-76 PLYMOUTH SCAMP

1967-76 DART & 1971-76 SCAMP BACK GLASS-TINTED

FITS: 1967-76 DODGE DARTFITS: 1971-76 PLYMOUTH SCAMP*2 door hardtop & 2 door sedan