1969

1969 CAMARO & FIREBIRD GAS TANK WITH NECK

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1967-69 CAMARO 4 INCH STEEL COWL HOOD

FITS: 1967-1969 CAMARO

1967-69 CAMARO 2 INCH STEEL COWL HOOD

SHIPS TRUCK FREIGHTFITS: 1967-69 CAMARO

1967-1969 CAMARO & FIREBIRD GAS TANK STRAPS (sold as a pair)

NEW DIE STAMPED REPRODUCTION.FITS: 1967-1969 CAMAROFITS: 1967-1969 FIREBIRD

GM DOOR HINGE REBUILD KIT (order 1 kit per car)

14 PIECE KIT INCLUDES: (4) PINS, (8) STANDARD BUSHINGS, (2) OVERSIZE BUSHINGS. THIS KIT WILL DO BOTH LH & RH DOORS ON 2 DOOR MODELS.FITS: 1962-79 X-BODYFITS: 1967-69 F-BODYFITS: 1964-67 GM A-BODY

1967-81 CAMARO / FIREBIRD & 1968-72 NOVA BODY MOUNT HARDWARE KIT

NEW REPRODUCTION CORRECT BODY MOUNT HARDWARE KIT INCLUDING RADIATOR SUPPORT.FOR HARDTOP & CONVERTIBLE.FITS: 1968-72 NOVAFITS: 1967-81 CAMAROFITS: 1967-81 FIREBIRD & TRANS AM

69 CAMARO / FIREBIRD & 1970-72 NOVA BODY MOUNT BUSHING KIT

NEW REPRODUCTION 12 PIECE KIT INCLUDES: RADIATOR SUPPORT & BODY BUSHINGS WITH STEEL SLEEVES. HARDWARE NOT INCLUDED, SEE CA-170BFITS: 1969  CHEVY CAMAROFITS: 1969 PONTIAC FIREBIRDFITS: 1970-72 CHEVY NOVA*HARDTOP & CONVERTIBLE

1969 CAMARO & FIREBIRD COUPE LOWER COWL PANEL (with a/c)

NEW DETAILED REPRODUCTION FOR MODELS WITH A/CFITS: 1969 CAMAROFITS: 1969 FIREIRD

1969 CAMARO & FIREBIRD LOWER COWL PANEL (without a/c)

NEW DETAILED REPRODUCTION FOR MODELS WITHOUT A/CFITS: 1969 CAMAROFITS: 1969 FIREIRD

1968-1969 CAMARO & FIREBIRD UPPER COWL PANEL SKIN (with a/c)

NEW DETAILED REPRODUCTION FOR MODELS WITH AIR CONDITIONINGFITS: 1968-1969 CAMAROFITS: 1968-1969 FIREBIRD

1968-1969 CAMARO & FIREBIRD UPPER COWL PANEL SKIN (without a/c)

NEW DETAILED REPRODUCTION FOR MODELS WITHOUT AIR CONDITIONING.FITS: 1968-1969 CAMAROFITS: 1968-1969 FIREBIRD

1967-68 CAMARO & FIREBIRD LOWER / INNER COWL PANEL (without a/c)

NEW REPRODUCTIONFITS: 1967-68 CAMAROFITS: 1967-68 FIREBIRD

1961 & LATER GM CAR & TRUCK FLOOR PAN PLUG WITHOUT NOTCH

STEEL FLOOR AND TRUNK PLUG, USE AS NEEDEDFITS: 1967-73 CAMARO & FIREBIRDFITS: 1964-72 GM A-BODYFITS: 1961-70 IMPALA / BEL-AIR / BISCAYNE / CAPRICEFITS: 1962-79 NOVA & X-BODY

1969 CAMARO CHROME REAR BUMPER

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1969 CAMARO CHROME FRONT BUMPER

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

RH / 1969 CAMARO & FIREBIRD FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. 10 IN. HIGHFITS: 1969 CAMAROFITS: 1969 FIREBIRD (for use below the louvers)

LH / 1969 CAMARO & FIREBIRD FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. 10 IN. HIGHFITS: 1969 CAMAROFITS: 1969 FIREBIRD (for use below the louvers)

RH / 1967-1969 CAMARO & FIREBIRD FACTORY STYLE OUTER ROCKER PANEL

NEW REPRODUCTION DIE FORMED & EDP COATED.FITS: 1967-1969 CAMAROFITS: 1967-1969 FIREBIRDNote: Modify top section for convertible models.

LH / 1967-1969 CAMARO & FIREBIRD FACTORY STYLE OUTER ROCKER PANEL

NEW REPRODUCTION DIE FORMED & EDP COATED.FITS: 1967-1969 CAMAROFITS: 1967-1969 FIREBIRDNote: Modify top section for convertible models.

RH / 1967-69 CAMARO & FIREBIRD CONVERTIBLE ROCKER PANEL ASSEMBLY

SHIPS TRUCK FREIGHTNEW COMPLETE INNER & OUTER ROCKER PANEL ASSEMBLY.FITS: 1967-69 CAMAROFITS: 1967-69 FIREBIRD

LH / 1967-69 CAMARO & FIREBIRD CONVERTIBLE ROCKER PANEL ASSEMBLY

SHIPS TRUCK FREIGHTNEW COMPLETE INNER & OUTER ROCKER PANEL ASSEMBLY.FITS: 1967-69 CAMAROFITS: 1967-69 FIREBIRD

RH / 1969 CAMARO REAR QUARTER SKIN (with door jamb)

SHIPS TRUCK FREIGHTNEW REPRODUCTION QUARTER SKIN WITH THE DOOR JAMB LOCK PILLARFITS: 1969 CHEVY CAMARO

LH / 1969 CAMARO REAR QUARTER SKIN (with door jamb)

SHIPS TRUCK FREIGHTNEW REPRODUCTION QUARTER SKIN WITH THE DOOR JAMB LOCK PILLARFITS: 1969 CHEVY CAMARO

RH / 1969 CAMARO REAR QUARTER SKIN (without door jamb)

SHIPS TRUCK FREIGHT24 IN. HIGH X 66 IN. LONGFITS: 1969 CAMARO

LH / 1969 CAMARO REAR QUARTER SKIN (without door jamb)

SHIPS TRUCK FREIGHT24 IN. HIGH X 66 IN. LONGFITS: 1969 CAMARO

RH / 1969 CAMARO & FIREBIRD TRUNK FLOOR GAS TANK BRACE

FITS: 1969 CAMARO ALLFITS: 1969 FIREBIRD ALL

LH / 1969 CAMARO & FIREBIRD TRUNK FLOOR GAS TANK BRACE

FITS: 1969 CAMARO ALLFITS: 1969 FIREBIRD ALL

RH / 1969 CAMARO & FIREBIRD TRUNK FLOOR EXTENSION PANEL

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1969 CAMARO & FIREBIRD TRUNK FLOOR EXTENSION PANEL

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

1969 CAMARO & FIREBIRD TRUNK FLOOR-CENTER SECTION

SHIPS TRUCK FREIGHT39 IN. LONG X 44 IN. WIDEFITS: 1969 CAMARO ALLFITS: 1969 FIREBIRD ALL

1968-69 CAMARO SS STEEL HOOD INSERT SET

LH & RH INSERTS, SCREENS & BACKING PLATES.FITS: 1968-69 CAMARO SS HOOD

1967-1969 CAMARO SUPER SPORT STEEL HOOD

SHIPS TRUCK FREIGHTFITS: 1967-1969 CAMARO

1967-69 CAMARO & FIREBIRD REAR DECK FILLER PANEL (convertible)

NEW HEAVY GAUGE REPRODUCTION-LOCATED IN FRONT OF THE TRUNK LIDFITS: 1967-69 CAMARO CONVERTIBLEFITS: 1967-69 FIREBIRD CONVERTIBLE

1969 CAMARO & FIREBIRD LOWER COWL PANEL ASSEMBLY (with a/c)

INCLUDES UPPER AND INNER COWL ASSEMBLEDFITS: 1969 CAMAROFITS: 1969 FIREBIRD

1967-69 CAMARO FLAT STANDARD STEEL HOOD

SHIPS TRUCK FREIGHTFITS: 67-69 CAMARO

1969 CAMARO HOOD RELEASE ASSEMBLY

EDP COATED, COMPLETE WITH LATCH, SPRINGS AND HANDLEFITS; 69 CAMARO

1969 CAMARO COMPLETE STEEL DASH STRUCTURE

NEW REPRODUCTION DASH PANEL TOP AND INNER STRUCTUREFITS: 1969 CAMARO ALL MODELS

RH / 1969 CAMARO & FIREBIRD FULL REPLACEMENT REAR FRAME RAIL

NEW REPRODUCTION REAR FRAME RAIL COMPLETE LIKE ORIGINAL, REMOVE AND REPLACE. HEAVY GAUGE AND EDP COATED.FITS: 1969 CAMARO FITS: 1969 FIREBIRD

LH / 1969 CAMARO & FIREBIRD FULL REPLACEMENT REAR FRAME RAIL

NEW REPRODUCTION REAR FRAME RAIL COMPLETE LIKE ORIGINAL, REMOVE AND REPLACE. HEAVY GAUGE AND EDP COATED.FITS: 1969 CAMARO FITS: 1969 FIREBIRD

RH / 1967-69 CAMARO / FIREBIRD & 1968-79 NOVA DOOR HINGE PILLAR TO ROCKER PANEL SUPPORT

LOCATED BEHIND THE KICK PANEL IN FRONT OF THE DOORFITS: 1967-69 CAMAROFITS: 1967-69 FIREBIRDFITS: 1968-79 NOVA WITH ALTERATIONS

LH / 1967-69 CAMARO / FIREBIRD & 1968-79 NOVA DOOR HINGE PILLAR TO ROCKER PANEL SUPPORT

LOCATED BEHIND THE KICK PANEL IN FRONT OF THE DOORFITS: 1967-69 CAMAROFITS: 1967-69 FIREBIRDFITS: 1968-79 NOVA WITH ALTERATIONS

RH / 1967-1969 CAMARO & FIREBIRD INNER ROCKER PANEL

NEW REPRODUCTION DIE FORMED & EDP COATED.FITS: 1967-1969 CAMAROFITS: 1967-1969 FIREBIRDNote: Correct for hardtop models only

LH / 1967-1969 CAMARO & FIREBIRD INNER ROCKER PANEL

NEW REPRODUCTION DIE FORMED & EDP COATED.FITS: 1967-1969 CAMAROFITS: 1967-1969 FIREBIRDNote: Correct for hardtop models only

1967-69 CAMARO & FIREBIRD UPPER STEEL DRIP RAILS (sold as a pair)

NEW STEEL EDP COATED DRIP RAIL STARTS AT THE TOP OF THE WINDSHIELD TO THE BASE OF THE QUARTER GLASS.FITS: 1967-69 CAMARO COUPEFITS: 1967-69 FIREBIRD COUPE

RH / 1967-69 CAMARO & FIREBIRD FRONT SEAT SUB-FRAME MOUNT

This is an exact reproduction 1967, 1968, or 1969 Camaro / Firebird front seat mounting bracket which spot welds to the floor and also supports the rear of the sub frame.FITS: 1967-69 CAMAROFITS: 1967-69 FIREBIRD

LH / 1967-69 CAMARO & FIREBIRD FRONT SEAT SUB-FRAME MOUNT

This is an exact reproduction 1967, 1968, or 1969 Camaro / Firebird front seat mounting bracket which spot welds to the floor and also supports the rear of the sub frame.FITS: 1967-69 CAMAROFITS: 1967-69 FIREBIRD

RH / 1967-69 CAMARO & FIREBIRD LEAF SPRING BRACE BRACKET

EDP COATED AND DIE FORMED BRACKET LOCATED BETWEEN THE FLOOR PAN AND THE LEAF SPRING FRONT MOUNTING BRACKET, AND ON THE FORWARD END OF THE REAR FRAME RAILFITS: 1967-69 CAMARO ALL MODELSFITS: 1967-69 FIREBIRD ALL MODELS

LH / 1967-69 CAMARO & FIREBIRD LEAF SPRING BRACE BRACKET

EDP COATED AND DIE FORMED BRACKET LOCATED BETWEEN THE FLOOR PAN AND THE LEAF SPRING FRONT MOUNTING BRACKET, AND ON THE FORWARD END OF THE REAR FRAME RAILFITS: 1967-69 CAMARO ALL MODELSFITS: 1967-69 FIREBIRD ALL MODELS

RH / 1967-1969 CAMARO & FIREBIRD UNDER REAR SEAT BRACKET (convertible)

THIS IS A DIE FORMED STEEL BRACE THAT GOES UNDER THE REAR SEAT ON THE LEADING EDGE OF THE REAR SEAT RISERFITS: 1967-1969 CAMAROFITS: 1967-1969 FIREBIRD

LH / 1967-1969 CAMARO & FIREBIRD UNDER REAR SEAT BRACKET (convertible)

THIS IS A DIE FORMED STEEL BRACE THAT GOES ABOVE THE FLOOR AND UNDER THE REAR SEAT ON THE LEADING EDGE OF THE REAR SEAT RISER.FITS: 1967-1969 CAMAROFITS: 1967-1969 FIREBIRD

1969 CAMARO & FIREBIRD FIREWALL (without a/c)

SHIPS TRUCK FREIGHTMade to OE specs for a perfect fit right out of the box. These high-quality stamped steel panels feature a black EDP protective coating to extend the life of the panel.FITS: 1969 CAMAROFITS: 1969 FIREBIRD

1969 CAMARO & FIREBIRD COMPLETE FIREWALL (with a/c)

SHIPS TRUCK FREIGHTMade to OE specs for a perfect fit right out of the box. These high-quality stamped steel panels feature a black EDP protective coating to extend the life of the panel.FITS: 1969 CAMAROFITS: 1969 FIREBIRD