CHALLENGER

LH / 1970-71 E-BODY & 1971 B-BODY FRONT INNER FENDER

FITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1971 CHARGERFITS: 1971 ROADRUNNER-SATELLITE-GTX

1970-1974 CHALLENGER DECK FILLER PANEL CENTER SUPPORT

THIS STAMPED STEEL EDP COATED BRACE IS WELDED UNDERNEATH THE REAR SHELF PANEL FOR ADDITIONAL SUPPORT. 1 REQUIRED PER CAR.FITS: 1970-1974 CHALLENGER

1970-1974 CHALLENGER REAR DECK FILLER PANEL (2 door hardtop)

LOCATED BETWEEN THE REAR WINDOW AND TRUNK LID. ALSO KNOWN AS A DUTCHMAN PANEL.FITS: 1970-1974 CHALLENGER HARDTOP

1971-74 BARRACUDA & CHALLENGER ROOF RAIL WEATHERSTRIP (2 door hardtop)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1971-74 CHALLENGERFITS: 1971-74 BARRACUDA & CUDA

1970 BARRACUDA & CHALLENGER ROOFRAIL WEATHERSTRIP (2 door hardtop)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1970 CHALLENGERFITS: 1970 BARRACUDA & CUDA

1970-74 CHALLENGER HOOD SIDE-FRONT CORNER BUMPER SET

SOLD AS A 2 PIECE SET.1 IN. WIDE X 1-1/8 IN. THICKFITS: 1970-74 CHALLENGER ALL

1972-74 DODGE & PLYMOUTH B & E-BODY BATTERY HOLD DOWN KIT

SOLD AS A KIT. INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1972-74 CHALLENGERFITS: 1972-74 BARRACUDAFITS: 1972-74 CHARGERFITS: 1972-74 ROADRUNNER / SATELLITE

RH / 1971-1974 CHALLENGER COMPLETE INNER ROCKER PANEL

NEW ONE PIECE FULL LENGTH INNER ROCKER PANEL BACKING PLATE.*hardtop & convertible

LH / 1971-1974 CHALLENGER COMPLETE INNER ROCKER PANEL

NEW ONE PIECE FULL LENGTH INNER ROCKER PANEL BACKING PLATE.*hardtop & convertible

RH / 1970 CHALLENGER COMPLETE INNER ROCKER PANEL

NEW ONE PIECE FULL LENGTH INNER ROCKER PANEL BACKING PLATE.*hardtop & convertible

LH / 1970 CHALLENGER COMPLETE INNER ROCKER PANEL

NEW ONE PIECE FULL LENGTH INNER ROCKER PANEL BACKING PLATE.*hardtop & convertible

1970 DODGE CHALLENGER GRILLE EMBLEM

NEW REPRODUCTION CHALLENGER SCRIPTFITS: 1970 CHALLENGER

1970-1974 CHALLENGER & BARRACUDA WINDSHIELD MOLDING SET (2 door hardtop)

Finish off you windshield installation with a new set of AMD moldings. Finding a Cuda or Challenger lower windshield molding without scratches from the wipers is a real challenge. Our moldings are made of stainless steel like OE and fit the factory style...

1970-1974 DODGE CHALLENGER REAR WINDOW MOLDING SET

Don't change your back glass without installing a new set of AMD moldings. Our moldings are stainless steel like OE and will fit the factory style clips.FITS: 1970-1974 DODGE CHALLENGER*except R/T

1970-71 DODGE & PLYMOUTH B & E-BODY & 1970-76 A-BODY BATTERY TRAY HOLD DOWN KIT

SOLD AS A KIT, INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1970-71 CHARGERFITS: 1970-71 ROADRUNNER-SATELLITE-GTXFITS: 1970 CORONETFITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 DART & SWINGERFITS: 1971-76...

1970-74 E-BODY & 1971-72 B-BODY FOUR SPEED SHIFTER TUNNEL (bucket seats)

SHIFT TUNNEL WELDS TO THE MAIN FLOOR PAN, PRE-DRILLED FOR SHIFTER BOOT AND BEZEL.FITS: 1970-74 BARRACUDA FITS: 1970-74 CHALLENGERFITS: 1971-72 CHARGER / SUPERBEE (with console)FITS: 1971-72 ROADRUNNER / GTX / SATELLITE (with console)

1970-71 CHALLENGER, 71 CHARGER 426-HEMI HOOD NAMEPLATE

ORIGINAL PART 9 3/8 LONG 7/8 TALL, HEMI IN RED LETTERS

RH / 1970-74 E-BODY FULL FRONT FRAME RAIL (includes shock tower)

FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER

LH / 1970-74 E-BODY FULL FRONT FRAME RAIL (includes shock tower)

FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER

RH / 1970-74 E-BODY & 1962-74 B-BODY UPPER SHOCK TOWER BRACE

MOUNTS TO THE FRAME RAIL AND INNER FENDER. HAS CONTROL BRACKET ATTACHED LIKE ORIGINAL.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER.FITS: 1962-74 DODGE & PLYMOUTH B-BODY

LH / 1970-74 E-BODY & 1962-74 B-BODY UPPER SHOCK TOWER BRACE

MOUNTS TO THE FRAME RAIL AND INNER FENDER. HAS CONTROL BRACKET ATTACHED LIKE ORIGINAL.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER.FITS: 1962-74 DODGE & PLYMOUTH B-BODY

1970-74 CHALLENGER & BARRACUDA REAR FRAME RAIL CENTER CROSSMEMBER

CENTER SECTION ONLYTHIS IS THE REAR FRAME SECTION THAT TIES THE TWO FRAMES TOGETHER, AS WELL AS WHERE THE BUMPER BRACKETS BOLT TO. THIS IS A FULL REPLACEMENT. UNIT RUNS ACROSS THE REAR, AND CONNECTS TO THE CROSSMEMBER EXTENSIONS. FITS; 70-74 BARRACUDA,...

1970-1974 CHALLENGER STEEL SHAKER HOOD

SHIPS TRUCK FREIGHTBring your 70-74 Dodge Challenger back to life with a new Shaker Hood from AMD. Manufactured using our exclusive new tooling, all AMD hoods feature correct as original braces, brackets and bends meaning all hoods have the correct...

1970-74 CHALLENGER SHAKER HOOD TRIM RING

THIS TRIM RING ATTACHES TO THE HOOD AND SURROUNDS THE SHAKER SCOOP WHEN THE HOOD IS CLOSED.

1971-72 B-BODY & 1970-74 E-BODY RADIATOR SUPPORT EXTENSION

THIS DIE STAMPED PART WILL PERMIT THE CONVERSION FROM A 22 INCH RADIATOR TO A 26 INCH RADIATOR BY REMOVING YOUR EXISTING SUPPORT ON THE PASSENGER SIDE. DRILLING AND WELDING REQUIRED FOR OE APPEARANCE.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDAFITS:...

RH / 1970-74 CHALLENGER & BARRACUDA REAR FRAME RAIL SECTION

LOCATED UNDER THE TRUNK FLOOR, STARTS AT THE REAR CROSS MEMBER GOES FORWARD 36 INCHES. INCLUDES STEEL SLEEVE FOR REAR SHACKLE BUSHINGS.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

LH / 1970-74 CHALLENGER & BARRACUDA REAR FRAME RAIL SECTION

LOCATED UNDER THE TRUNK FLOOR, STARTS AT THE REAR CROSS MEMBER GOES FORWARD 36 INCHES. INCLUDES STEEL SLEEVE FOR REAR SHACKLE BUSHINGS.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1970-1972 DODGE & PLYMOUTH B-BODY & 1970-1974 E-BODY BATTERY TRAY

FITS: 1970-74 BARRACUDA FITS: 1970-74 CHALLENGERFITS: 1970-72 CHARGERFITS: 1970-72 ROADRUNNER-SATELLITE-GTX-BELVEDEREFITS: 1970-72 CORONET

RH / 1970-1974 CHALLENGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1970-1974 CHALLENGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

1974 DODGE CHALLENGER CHROME REAR BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1973-1974 DODGE CHALLENGER FRONT CHROME BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1973 CHALLENGER REAR CHROME BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1972 DODGE CHALLENGER REAR CHROME BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1972 DODGE CHALLENGER FRONT CHROME BUMPER (with jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1967-74 DODGE & PLYMOUTH A-BODY / 1966-70 B-BODY & 1970-74 E-BODY DOOR HINGE REBUILD KIT

INCLUDES: 1 pin 3 1/2 INCHES LONG, 1 pin 2 1/2 INCHES LONG AND 4 STANDARD BUSHINGS.FITS: 1967-74 A-BODYFITS: 1966-70 B-BODYFITS: 1970-74 E-BODY*mopars did not come with bushings so some drilling may be required for installation.

1970-74 CHALLENGER & BARRACUDA TRUNK FLOOR GAS TANK BRACE (sold as each)

THIS UNDERSIDE TRUNK FLOOR BRACE HELPS STABILIZE THE GAS TANK WHEN MOUNTED, AND THE STRAPS ATTACH HERE ALONG WITH THE J-BOLTS. 2 REQUIRED PER CAR.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA*2 door hardtop & convertible

1970-72 CHALLENGER REAR BUMPER GUARD BRACKET SET

NEW REPRODUCTION, SOLD AS 4PC SET ONLYFITS: 1970-72 DODGE CHALLENGER

RH / 1970-74 CHALLENGER REAR QUARTER-LOWER REAR SECTION

HEAVY GAUGE DIE STAMPED REPRODUCTION, WITH OUT SIDE MARKER LAMP HOLE. DOES NOT INCLUDE THE MOUNTING HOLES FOR THE REAR VALANCE, BEST TO USED AS A "PATCH" FOR MINOR RUST REPAIR.20" HEIGHT / 28" LENGTHFITS: 1970-74 CHALLENGER

LH / 1970-74 CHALLENGER REAR QUARTER-LOWER REAR SECTION

HEAVY GAUGE DIE STAMPED REPRODUCTION, WITH OUT SIDE MARKER LAMP HOLE. DOES NOT INCLUDE THE MOUNTING HOLES FOR THE REAR VALANCE, BEST TO USED AS A "PATCH" FOR MINOR RUST REPAIR.20" HIGH  28" LENGTHFITS: 1970-74 CHALLENGER

1970-72 DODGE CHALLENGER REAR CHROME BUMPER GUARDS (sold as a pair)

NEW REPRODUCTION.FITS: 1970-1972 CHALLENGER

1970-71 DODGE CHALLENGER CHROME REAR BUMPER (without jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1970-1971 DODGE CHALLENGER FRONT CHROME BUMPER (without jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

RH / 1970-74 CHALLENGER OUTER ROCKER PANEL

FULL LENGTH FACTORY STYLE OUTER ROCKER PANEL EXTENDS TO THE FRONT OF THE REAR TIRE LIKE ORIGINAL.*hardtop & convertible

LH / 1970-74 CHALLENGER OUTER ROCKER PANEL

FULL LENGTH FACTORY STYLE OUTER ROCKER PANEL EXTENDS TO THE FRONT OF THE REAR TIRE LIKE ORIGINAL.*hardtop & convertible

RH / 1970-74 BARRACUDA & CHALLENGER ROCKER PANEL FRONT END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces. 2 door hardtop & convertible

LH / 1970-74 BARRACUDA & CHALLENGER ROCKER PANEL FRONT END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces. 2 door hardtop & convertible

RH / BARRACUDA & CHALLENGER SLIP OVER ROCKER PANEL SKIN

HAND FORMED. ROCKER PANEL SKIN RUNS THE WIDTH OF THE DOOR GREAT FOR MINOR RUST REPAIR. 51 INCHES LONG*driver side no longer available from abs

DODGE & PLYMOUTH ANTENNA GASKET-EACH

APPLICATIONS:67-74 Dodge Dart, 64 330, Polara, 440, 65-70 Charger, 68 Super Bee, 69 Daytona, 70-74 Challenger, 71-74 Swinger, 67-74 Plymouth Valiant, Barracuda, 64 Fury, 65-70- Bevedere, Satellite, 67-70 Gtx, 68-70 Road Runner, 70-74 Duster, Cuda, 71-74...

MOPAR DOOR AND TRUNK LOCK GASKET SET-3 PCS

APPLICATIONS:66-70 Dodge Dart, 66-70 Plymouth Valiant, 66-69 Barracuda, 70 Duster 70-74 E Body

1972-1973 DODGE & PLYMOUTH DOOR BUMPER SET (rectangular)

FITS: 1972-73 DARTFITS: 1972 DEMONFITS: 1973 DART SPORTFITS: 1972-73 SCAMPFITS: 1973 DUSTERFITS: 1973 BARRACUDA