1970-1971

RH / 1970-74 E-BODY FULL FRONT FRAME RAIL (includes shock tower)

FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER

LH / 1970-74 E-BODY FULL FRONT FRAME RAIL (includes shock tower)

FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER

RH / 1970-74 E-BODY & 1962-74 B-BODY UPPER SHOCK TOWER BRACE

MOUNTS TO THE FRAME RAIL AND INNER FENDER. HAS CONTROL BRACKET ATTACHED LIKE ORIGINAL.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER.FITS: 1962-74 DODGE & PLYMOUTH B-BODY

LH / 1970-74 E-BODY & 1962-74 B-BODY UPPER SHOCK TOWER BRACE

MOUNTS TO THE FRAME RAIL AND INNER FENDER. HAS CONTROL BRACKET ATTACHED LIKE ORIGINAL.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGER.FITS: 1962-74 DODGE & PLYMOUTH B-BODY

1970-74 CHALLENGER & BARRACUDA REAR FRAME RAIL CENTER CROSSMEMBER

CENTER SECTION ONLYTHIS IS THE REAR FRAME SECTION THAT TIES THE TWO FRAMES TOGETHER, AS WELL AS WHERE THE BUMPER BRACKETS BOLT TO. THIS IS A FULL REPLACEMENT. UNIT RUNS ACROSS THE REAR, AND CONNECTS TO THE CROSSMEMBER EXTENSIONS. FITS; 70-74 BARRACUDA,...

1970-1974 CHALLENGER STEEL SHAKER HOOD

SHIPS TRUCK FREIGHTBring your 70-74 Dodge Challenger back to life with a new Shaker Hood from AMD. Manufactured using our exclusive new tooling, all AMD hoods feature correct as original braces, brackets and bends meaning all hoods have the correct...

1970-74 CHALLENGER SHAKER HOOD TRIM RING

THIS TRIM RING ATTACHES TO THE HOOD AND SURROUNDS THE SHAKER SCOOP WHEN THE HOOD IS CLOSED.

1971-72 B-BODY & 1970-74 E-BODY RADIATOR SUPPORT EXTENSION

THIS DIE STAMPED PART WILL PERMIT THE CONVERSION FROM A 22 INCH RADIATOR TO A 26 INCH RADIATOR BY REMOVING YOUR EXISTING SUPPORT ON THE PASSENGER SIDE. DRILLING AND WELDING REQUIRED FOR OE APPEARANCE.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDAFITS:...

RH / 1970-74 CHALLENGER & BARRACUDA REAR FRAME RAIL SECTION

LOCATED UNDER THE TRUNK FLOOR, STARTS AT THE REAR CROSS MEMBER GOES FORWARD 36 INCHES. INCLUDES STEEL SLEEVE FOR REAR SHACKLE BUSHINGS.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

LH / 1970-74 CHALLENGER & BARRACUDA REAR FRAME RAIL SECTION

LOCATED UNDER THE TRUNK FLOOR, STARTS AT THE REAR CROSS MEMBER GOES FORWARD 36 INCHES. INCLUDES STEEL SLEEVE FOR REAR SHACKLE BUSHINGS.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1970-1972 DODGE & PLYMOUTH B-BODY & 1970-1974 E-BODY BATTERY TRAY

FITS: 1970-74 BARRACUDA FITS: 1970-74 CHALLENGERFITS: 1970-72 CHARGERFITS: 1970-72 ROADRUNNER-SATELLITE-GTX-BELVEDEREFITS: 1970-72 CORONET

RH / 1970-1974 CHALLENGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1970-1974 CHALLENGER TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

1967-74 DODGE & PLYMOUTH A-BODY / 1966-70 B-BODY & 1970-74 E-BODY DOOR HINGE REBUILD KIT

INCLUDES: 1 pin 3 1/2 INCHES LONG, 1 pin 2 1/2 INCHES LONG AND 4 STANDARD BUSHINGS.FITS: 1967-74 A-BODYFITS: 1966-70 B-BODYFITS: 1970-74 E-BODY*mopars did not come with bushings so some drilling may be required for installation.

1970-74 CHALLENGER & BARRACUDA TRUNK FLOOR GAS TANK BRACE (sold as each)

THIS UNDERSIDE TRUNK FLOOR BRACE HELPS STABILIZE THE GAS TANK WHEN MOUNTED, AND THE STRAPS ATTACH HERE ALONG WITH THE J-BOLTS. 2 REQUIRED PER CAR.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA*2 door hardtop & convertible

1970-72 CHALLENGER REAR BUMPER GUARD BRACKET SET

NEW REPRODUCTION, SOLD AS 4PC SET ONLYFITS: 1970-72 DODGE CHALLENGER

RH / 1970-74 CHALLENGER REAR QUARTER-LOWER REAR SECTION

HEAVY GAUGE DIE STAMPED REPRODUCTION, WITH OUT SIDE MARKER LAMP HOLE. DOES NOT INCLUDE THE MOUNTING HOLES FOR THE REAR VALANCE, BEST TO USED AS A "PATCH" FOR MINOR RUST REPAIR.20" HEIGHT / 28" LENGTHFITS: 1970-74 CHALLENGER

LH / 1970-74 CHALLENGER REAR QUARTER-LOWER REAR SECTION

HEAVY GAUGE DIE STAMPED REPRODUCTION, WITH OUT SIDE MARKER LAMP HOLE. DOES NOT INCLUDE THE MOUNTING HOLES FOR THE REAR VALANCE, BEST TO USED AS A "PATCH" FOR MINOR RUST REPAIR.20" HIGH  28" LENGTHFITS: 1970-74 CHALLENGER

1970-72 DODGE CHALLENGER REAR CHROME BUMPER GUARDS (sold as a pair)

NEW REPRODUCTION.FITS: 1970-1972 CHALLENGER

1970-71 DODGE CHALLENGER CHROME REAR BUMPER (without jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

1970-1971 DODGE CHALLENGER FRONT CHROME BUMPER (without jack slots)

Restoration bumpers are made from heavy gauge steel and feature an OE quality chrome finish. Bumpers are precision designed and stamped creating a product that looks great and fits even better!. All parts feature, depending on application,...

RH / 1970-74 CHALLENGER OUTER ROCKER PANEL

FULL LENGTH FACTORY STYLE OUTER ROCKER PANEL EXTENDS TO THE FRONT OF THE REAR TIRE LIKE ORIGINAL.*hardtop & convertible

LH / 1970-74 CHALLENGER OUTER ROCKER PANEL

FULL LENGTH FACTORY STYLE OUTER ROCKER PANEL EXTENDS TO THE FRONT OF THE REAR TIRE LIKE ORIGINAL.*hardtop & convertible

RH / 1970-74 BARRACUDA & CHALLENGER ROCKER PANEL FRONT END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces. 2 door hardtop & convertible

LH / 1970-74 BARRACUDA & CHALLENGER ROCKER PANEL FRONT END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces. 2 door hardtop & convertible

RH / BARRACUDA & CHALLENGER SLIP OVER ROCKER PANEL SKIN

HAND FORMED. ROCKER PANEL SKIN RUNS THE WIDTH OF THE DOOR GREAT FOR MINOR RUST REPAIR. 51 INCHES LONG*driver side no longer available from abs

DODGE & PLYMOUTH ANTENNA GASKET-EACH

APPLICATIONS:67-74 Dodge Dart, 64 330, Polara, 440, 65-70 Charger, 68 Super Bee, 69 Daytona, 70-74 Challenger, 71-74 Swinger, 67-74 Plymouth Valiant, Barracuda, 64 Fury, 65-70- Bevedere, Satellite, 67-70 Gtx, 68-70 Road Runner, 70-74 Duster, Cuda, 71-74...

MOPAR DOOR AND TRUNK LOCK GASKET SET-3 PCS

APPLICATIONS:66-70 Dodge Dart, 66-70 Plymouth Valiant, 66-69 Barracuda, 70 Duster 70-74 E Body

1967-76 DODGE & PLYMOUTH BUMPER BOLT SET (8 bolts)

Don't ruin the look of your restoration by trying to reuse old, rusted hardware that not only looks bad, but could also be a safety hazard. ABS bumper mounting bolts are precision-manufactured from steel with a stainless steel cap.*8 Bolts, 8 Flat...

LH / 1970-1974 CHALLENGER & 1970 CHARGER AMBER PARKING LAMP ASSEMBLY

REPRODUCTION PARK LAMP ASSEMBLIES. EACH ASSEMBLY IS MANUFACTURED TO FACTORY SPECIFICATIONS WITH THE CORRECT HOUSING, WIRE PIG TAIL AND PROPER LENS COLOR.FITS: 1970-1974 DODGE CHALLENGERFITS: 1970 CHARGER

RH / 1970-1974 CHALLENGER & 1970 CHARGER PARK LAMP ASSEMBLY

REPRODUCTION PARK LAMP ASSEMBLIES. EACH ASSEMBLY IS MANUFACTURED TO FACTORY SPECIFICATIONS WITH THE CORRECT HOUSING, WIRE PIG TAIL AND PROPER LENS COLOR.FITS: 1970-1974 DODGE CHALLENGERFITS: 1970 CHARGER

LH / 1970-71 CHALLENGER RED SIDE MARKER ASSEMBLY-REAR

NEW REPRODUCTIONINCLUDES LENSE,BEZEL,HOUSING AND PIG TAILFITS: 1970-71 DODGE CHALLENGER

RH / 1970-71 CHALLENGER RED SIDE MARKER ASSEMBLY-REAR

NEW REPRODUCTIONINCLUDES LENSE,BEZEL,HOUSING AND PIG TAILFITS: 1970-71 DODGE CHALLENGER

LH / 1970-71 CHALLENGER AMBER SIDE MARKER ASSEMBY-FRONT

NEW REPRODUCTIONINCLUDES LENSE,BEZEL,HOUSING AND PIG TAILFITS: 1970-71 DODGE CHALLENGER

RH / 1970-71 CHALLENGER AMBER SIDE MARKER ASSEMBY-FRONT

NEW REPRODUCTIONINCLUDES LENSE,BEZEL,HOUSING AND PIG TAILFITS: 1970-71 DODGE CHALLENGER

1970-74 BARRACUDA & CHALLENGER WINDSHIELD CLIP SET

REPRODUCTION CLIPS FOR ATTACHING THE MOLDINGS THAT SURROUND THE FRONT WINDSHIELD.12PCS SCREWS INCLUDEDFITS: 1970-74 PLYMOUTH BARRACUDAFITS: 1970-74 DODGE CHALLENGER

DODGE & PLYMOUTH E-BODY & 70 B-BODY GAS TANK GROMMET

(tank to fill tube)NOT INCLUDED WITH OUR GAS TANKS, THIS GROMMET IS NECESSARY WHEN REPLACING YOUR GAS TANK.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGERFITS: 1970 B-BODY

1970-74 BARRACUDA & CHALLENGER FUEL FILLER TUBE TO TRUNK FLOOR SEAL

NEW CORRECT REPRODUCTION OF THE SEAL USED TO FILL AROUND THE FILLER NECK AT THE BASE OF THE TRUNK FLOOR.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

1971-72 DODGE CHALLENGER GAS TANK WITH 4 SIDE VENT PIPES

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank...

1970 DODGE CHALLENGER GAS TANK WITHOUT VENT PIPE

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1970-74 BARRACUDA & CHALLENGER DOOR WEATHERSTRIP-PAIR

SOLD AS A PAIR WITH ONE MOLDED END AS ORIGINAL AND DOOR SEAL END CAPS INCLUDED.FITS: 1970-74 BARRACUDA ALLFITS: 1970-74 CHALLENGER ALL

1971-74 BARRACUDA & CHALLENGER BODY PLUG KIT

KITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR.FITS: 1971-74...

1970 CHALLENGER BODY PLUG KIT

KITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR.FITS: 1970 CHALLENGER

1971 CHALLENGER BODY BUMPER KIT (with hood wedges)

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1970 CHALLENGER BODY BUMPER KIT (with hood wedges)

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1970-74 BARRACUDA & CHALLENGER GALVANIZED MUFFLER HEAT SHIELDS (pair)

Our shields are made from material that correctly match originals. If correct fit and appearance is important then AMD shields are your best choice.

RH / CHALLENGER & BARRACUDA REAR CROSSMEMBER END

CONNECTS THE THE MAIN CENTER REAR CROSS MEMBER AND BLOCKS OFF THE BACKSIDE OF THE TRUNK FLOOR EXTENSION.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

LH / CHALLENGER & BARRACUDA REAR CROSSMEMBER END

CONNECTS THE THE MAIN CENTER REAR CROSS MEMBER AND BLOCKS OFF THE BACKSIDE OF THE TRUNK FLOOR EXTENSION.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA

1970-1974 CHALLENGER & BARRACUDA GAS TANK BRACES (sold as a pair)

SOLD AS 2 PIECE SET. THIS UNDERSIDE TRUNK FLOOR BRACE HELPS STABILIZE THE GAS TANK WHEN MOUNTED.FITS: 1970-74 CHALLENGERFITS: 1970-74 BARRACUDA*2 door hardtop & convertible

1970-74 BARRACUDA & CHALLENGER JACK BRACKET-FRONT SECTION

NEW CORRECT DETAILED REPRODUCTION OF THE FRONT BRACKET FOR THE JACK HOLD DOWN.FITS: 1970-74 BARRACUDA COUPE, CONVERTIBLEFITS: 1970-74 CHALLNGER COUPE, CONVERTIBLE

1970-74 DODGE CHALLENGER TRUNK LOCK SUPPORT

NEW REPRODUCTIONEDP COATED, USE WHEN REPLACING TRUNK FLOOR OR TAIL LIGHT PANEL.