1973-1976

Outer Rocker Panel - LH - 71-72 Demon; 67-69 Barracuda; 70-76 Duster; 73-76 Dart Sport

Outer Rocker Panel - LH - 71-72 Demon; 67-69 Barracuda; 70-76 Duster; 73-76 Dart Sport

Outer Rocker Panel - RH - 71-72 Demon; 67-69 Barracuda; 70-76 Duster; 73-76 Dart Sport

Outer Rocker Panel - RH - 71-72 Demon; 67-69 Barracuda; 70-76 Duster; 73-76 Dart Sport

1970-76 DUSTER / DEMON / DART SPORT REAR WINDOW CLIP SET

REPRODUCTION CLIPS FOR ATTACHING THE MOLDINGS THAT SURROUND THE REAR WINDOW. 12 PCS SCREWS INCLUDED.FITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

1973-76 DODGE & PLYMOUTH TRUNK LOCK KIT (see fitment)

REPRODUCTION UNIVERSAL TRUNK LOCK ASSEMBLY. INCLUDES LOCK CYLINDER, 2 KEYS, 5 DIFFERENT LENGTH LOCK RODS, ONE LOCK RETAINER,AND ONE GASKET FOR USE ON A VARIETY OF CARS. SEE FITMENT BELOW.FITS: 1973-74 CHARGERFITS: 1973-74 ROADRUNNER / SATELLITEFITS:...

LH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT FLOOR PAN PATCH

DIE STAMPED. STARTS FROM THE FRONT OF THE SEAT TO THE FIREWALL SEAM. 25 IN. WIDE X 27 IN. LONG FITS: 1970-76 DUSTERFITS: 1967-76 DART SWINGERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDA

1971-1976 A-BODY & 1972-1993 DODGE TRUCK OUTSIDE DOOR HANDLE SET

NEW REPRODUCTION CHROME OUTSIDE DOOR HANDLE ASSEMBLIES COME COMPLETE WITH CHROME PUSH BUTTONS AND GASKETS. LH & RH (pair)FITS: 1971-1976 DART & SWINGERFITS: 1971-1976 SCAMPFITS: 1971-1972 DEMONFITS: 1971-1976 DUSTERFITS: 1971-1976 VALIANTFITS: 1972-1993...

1967-76 DODGE & PLYMOUTH A-BODY DOOR SILL PLATES (sold as a pair)

DIE STAMPED ALUMINUM FLAT FINISH, INCLUDES FASTENERS. ATTACHES TO THE FLOOR WIRE COVER AND HOLDS DOWN THE OUTER EDGE OF THE CARPET IN THE DOOR OPENING.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMPFITS: 1971-72 DODGE...

1967-76 DODGE & PLYMOUTH A-BODY FOUR SPEED SHIFTER TUNNEL

FOR MODELS WITH OR WITHOUT CONSOLE. PRE-DRILLED HOLES FOR SHIFTER BOOT AND BEZEL.FITS: 1967-76 DART & DART SPORTFITS: 1970-76 DUSTERFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMPFITS: 1973-76 DODGE DART SPORTFITS: 1971-72 DODGE DEMON

1967-1976 DODGE & PLYMOUTH UPPER COWL PLENUM

NEW EDP COATED REPRODUCTION UPPER COWL PLENUM. ATTACHES BELOW THE UPPER COWL VENT PANEL.FITS: 1967-1976 DART FITS: 1967-1976 DART SPORTFITS: 1967-1969 BARRACUDAFITS: 1971-1976 SCAMPFITS: 1967-1976 VALIANT

1967-1976 DODGE & PLYMOUTH UPPER COWL VENT PANEL

NEW EDP COATED REPRODUCTION UPPER COWL PANEL.FITS: 1967-1976 DART FITS: 1967-1976 DART SPORTFITS: 1967-1969 BARRACUDAFITS: 1971-1976 SCAMPFITS: 1967-1976 VALIANT

RH / 1967-1974 DODGE & PLYMOUTH A-BODY FRONT INNER FENDER

HEAVY GAUGE COMPLETE FULL REPLACEMENT REPRODUCTIONFITS: 1967-74 DARTFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-74 SCAMP

1967-1974 DODGE & PLYMOUTH A-BODY FRONT INNER FENDERS (sold as a pair)

KIT INCLUDES BOTH LH & RH PAIRHEAVY GAUGE COMPLETE FULL REPLACEMENT REPRODUCTIONFITS: 1967-74 DARTFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDA FITS: 1971-74 SCAMP

LH / 1967-1974 DODGE & PLYMOUTH A-BODY FRONT INNER FENDER

HEAVY GAUGE COMPLETE FULL REPLACEMENT REPRODUCTIONFITS: 1967-74 DARTFITS: 1970-74 DUSTERFITS: 1973-74 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-74 SCAMP

RH / 1967-76 DODGE & PLYMOUTH A-BODY INNER FENDER TO FIREWALL BRACKET

EDP COATED & HEAVY GAUGE 2 PIECE FILLER PANEL USED TO ATTACH THE FULL FRONT INNER FENDER (MP-399OE) TO THE COWL PANEL.FITS: 1967-76 DARTFITS: 1970-76 DUSTERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMP

LH / 1967-76 DODGE & PLYMOUTH A-BODY INNER FENDER TO FIREWALL BRACKET

EDP COATED & HEAVY GAUGE 2 PIECE FILLER PANEL USED TO ATTACH THE FULL FRONT INNER FENDER (MP-399OE) TO THE COWL PANEL.FITS: 1967-76 DARTFITS: 1970-76 DUSTERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMP

1967-1976 DODGE & PLYMOUTH A-BODY TORSION BAR CROSSMEMBER

It is important this item be in good shape as it is a major component on the front of the body. Our crossmember has the same metal thickness as OE and the area holding the torsion bars will accept stock size bars as original.FITS: 1967-76 DART &...

RH / 1970-1976 DODGE & PLYMOUTH A-BODY TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1970-1976 DODGE & PLYMOUTH A-BODY TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

RH / 1967-1976 DODGE & PLYMOUTH OUTER WHEELHOUSE (including demon)

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1967-69 BARRACUDAFITS: 1970-76...

LH / 1967-1976 DODGE & PLYMOUTH OUTER WHEELHOUSE (including demon)

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1967-69 BARRACUDAFITS: 1970-76...

RH / 1967-76 DODGE & PLYMOUTH A-BODY REAR INNER WHEELHOUSE

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...

LH / 1967-76 DODGE & PLYMOUTH A-BODY REAR INNER WHEELHOUSE

Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses contain all the bends, flanges,...

1967-76 DODGE & PLYMOUTH A-BODY FLOOR WIRING COVER SET

You will almost always need these pieces when replacing a floor pan. They are usually rusted and often break when removed. Our set includes all the pieces required to make a nice installation.FITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72...

1972-76 A-BODY / 1972-74 E & B-BODY & 1981-93 DODGE TRUCK SIDE MARKER LIGHT SET (4 piece set)

FITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

RH / 1972-76 DUSTER / 1973-76 DART SPORT & 1972 DEMON OE FULL REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

LH / 1972-76 DUSTER / 1973-76 DART SPORT & 1972 DEMON OE FULL REAR QUARTER PANEL

SHIPS TRUCK FREIGHTmanufactured from high quality, heavy gauge steel on exclusive new tooling and feature, depending on application, correct as original body lines, braces, marker light holes, and antenna cut-out. Unlike lesser quality competitors parts,...

1972-76 A-BODY,1972-74 E & B-BODY,1981-93 DODGE TRUCK REAR SIDE MARKER LIGHT-RED

ORDER 2 PER CARFITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

RH / 1967-74 DODGE & PLYMOUTH A-BODY UPPER DOOR HINGE

FITS: 1967-74 DUSTERFITS: 1971-72 DEMONFITS: 1967-74 DARTFITS: 1973-74 DART SPORTFITS: 1967-69 BARRACUDA

1967-74 DODGE & PLYMOUTH A-BODY DOOR HINGES (4 piece set)

COMPLETE REPLACEMENTSFITS: 1967-74 DUSTERFITS: 1971-72 DEMONFITS: 1967-74 DARTFITS: 1973-74 DART SPORTFITS: 1967-69 BARRACUDA

RH / 1967-1974 DODGE & PLYMOUTH A-BODY & 1966-1970 B-BODY LOWER DOOR HINGE

FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDEREFITS: 1966-70 CORONETFITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 SCAMP

LH / 1967-1974 DODGE & PLYMOUTH A-BODY & 1966-1970 B-BODY LOWER DOOR HINGE

FITS: 1966-70 CHARGERFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDEREFITS: 1966-70 CORONETFITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 SCAMP

1972-76 A-BODY,1972-74 E & B-BODY,1981-93 DODGE TRUCK FRONT SIDE MARKER LIGHT (sold as each)

FITS: 1972-76 A-BODYFITS: 1972-74 B-BODYFITS: 1972-74 BARRACUDA & CHALLENGERFITS: 1981-93 DODGE PICKUP & RAMCHARGER

1967-1976 DODGE & PLYMOUTH A-BODY COMPLETE TRUNK FLOOR (best quality)

SHIPS TRUCK FREIGHTIt is very common to have rust in a Plymouth or Dodge trunk floor. Our OE style pans will drop right in and mate to all adjacent panels. They extend to the trunk extensions on the side, the tail light panel at the rear and the rear...

1968-76 DODGE & PLYMOUTH A-BODY SPARE TIRE / GAS TANK BRACKET

OFTEN RUSTED OR MISSING, THIS SPARE TIRE HOLD DOWN / GAS TANK BRACKET IS NEEDED ON ALMOST EVERY MOPAR A-BODY VEHICLE. THIS ITEM IS INCLUDED WITH OUR FACTORY STYLE TRUNK FLOOR, PART # MP-350OE. FITS: 1968-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS:...

1962-76 DODGE & PLYMOUTH A-BODY TRUNK FLOOR

DIE STAMPED USA MADE SHIPS FED-EX GROUNDMODIFY FOR 1962-66 MODELS-CALL FOR DETAILS.MUST CUT-OUT YOUR OWN DRAIN HOLES AND FILLER NECK HOLES.MUST REUSE EXISTING BRACKETS. FITS: 1964-69 BARRACUDAFITS: 1963-76 VALIANTFITS: 1963-76 DARTFITS: 1973-76 DART...

1967-76 DODGE & PLYMOUTH A-BODY CONSOLE BRACKET SET (manual transmission)

NEW COMPLETE HEAVY GAUGE REPRODUCTION SET.FITS: 1970-76 DUSTERFITS: 1967-76 DART SWINGERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDA

1967-1976 DODGE & PLYMOUTH A-BODY CONSOLE BRACKET SET (automatic transmission)

NEW COMPLETE HEAVY GAUGE REPRODUCTION SET.FITS: 1970-76 DUSTERFITS: 1967-76 DART SWINGERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDA

1967-76 A / B / E-BODY JACK BRACKET SPRING HOOK

MOUNTS ON TRUNK FLOOR EXTENSION. SPRING THAT HOLDS JACK IN PLACE HOOKS TO THIS BRACKET.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGERFITS: 1968-70 CHARGERFITS: 1967-76 DUSTER / DEMON / DART SPORTFITS: 1967-76 DART / VALIANTFITS: 1971-76 SCAMP

1967-1976 DODGE & PLYMOUTH A-BODY LOWER RADIATOR SUPPORT

FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1970-76 DUSTERFITS: 1967-69 BARRACUDAFITS: 1971-76 SCAMPFITS: 1971-72 DODGE DEMON

1968-76 DODGE & PLYMOUTH A-BODY GAS TANK STRAPS (sold as a pair)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.FITS: 1968-76 DARTFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS:...

1970-71 DODGE & PLYMOUTH B & E-BODY & 1970-76 A-BODY BATTERY TRAY HOLD DOWN KIT

SOLD AS A KIT, INCLUDES TOP CLAMP, 2 CORRECT J-BOLTS AND WING NUTS.FITS: 1970-71 CHARGERFITS: 1970-71 ROADRUNNER-SATELLITE-GTXFITS: 1970 CORONETFITS: 1970-71 CHALLENGERFITS: 1970-71 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 DART & SWINGERFITS: 1971-76...

1973-1976 DODGE & PLYMOUTH A-BODY QUARTER GLASS SEAL (with pop-out glass)

REPLACEMENT QUARTER GLASS SEALS FOR 1973-1976 MOPAR A-BODY MODELS WITH POP OUT QUARTER WINDOWS. SOLD AS A PAIR LH & RH.FITS: 1973-1976 DUSTERFITS: 1973-1976 DART SPORT

1967-1976 PLYMOUTH A-BODY COMPLETE FLOOR

SHIPS TRUCK FREIGHTOE style coverage like original. Mates to all adjacent panels with OE dimensions. Comes with fasteners and brackets for speedometer cable, emergency brake cable, seat belts and rear seat retainers. You will also need rear floor pans...

1967-76 DODGE & PLYMOUTH A-BODY UNDER REAR SEAT FLOOR PAN

SHIPS TRUCK FREIGHTFits under rear seat area, over the top of the axle housing and connects to the rear of the trunk floor pan. Includes emergency brake, rear seat, rear seat belt, exhaust hanger and pinion snubber brackets welded into place where...

RH / 1967-1976 PLYMOUTH A-BODY LONG FLOOR PAN

FITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT FITS: 1967-71 PLYMOUTH VALIANT

LH / 1967-1976 PLYMOUTH A-BODY LONG FLOOR PAN

FITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT FITS: 1967-71 PLYMOUTH VALIANT

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1967-74 DODGE & PLYMOUTH A-BODY / 1966-70 B-BODY & 1970-74 E-BODY DOOR HINGE REBUILD KIT

INCLUDES: 1 pin 3 1/2 INCHES LONG, 1 pin 2 1/2 INCHES LONG AND 4 STANDARD BUSHINGS.FITS: 1967-74 A-BODYFITS: 1966-70 B-BODYFITS: 1970-74 E-BODY*mopars did not come with bushings so some drilling may be required for installation.

1970-76 DUSTER / DEMON / DART SPORT REAR WINDOW GASKET

NEW REPRODUCTION GASKET ACCEPTS TRIM (2 DOOR HARDTOP)FITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT*wls900 black lock strip included

1970-1976 DUSTER / DEMON / DART SPORT WINDSHIELD MOLDING

NEW HEAVY GAUGE REPRODUCTION STAINLESS STEEL 5 PC MOLDING KIT.FITS: 1973-76 DODGE DART SPORTFITS: 1971-72 DODGE DEMONFITS: 1970-76 PLYMOUTH DUSTER

1970-76 DUSTER / DEMON / DART SPORT DRIP RAIL MOLDING SET

NEW REPRODUCTION STAINLESS STEEL (like original) 4 PIECE SET FOR THE UPPER DRIP RAIL AND FRONT LOWER A-PILLAR.FITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT*2 door hardtop

1970-76 DUSTER / DEMON / DART SPORT REAR WINDOW MOLDING SET

NEW HEAVY GAUGE REPRODUCTION STAINLESS STEEL 4 PC MOLDING KIT.FITS: 1973-76 DODGE DART SPORTFITS: 1971-72 DODGE DEMONFITS: 1970-76 PLYMOUTH DUSTER