1967-1969

1967-69 BARRACUDA COMPLETE BUMPER BRACKET SET

AMD bumper brackets are accurate reproductions of factory originals. Don't waste your time trying to refurbish your rusted and pitted originals. AMD brackets should please even the most demanding restorer. Brackets have pentastars and part numbers...

1967-72 DODGE & PLYMOUTH A-BODY VENT WINDOW SEALS

NEW REPRODUCTION SEALS FOR BOTH LH & RH (pair)FITS: 1967-72 DARTFITS: 1967-69 BARRACUDA ALLFITS: 1967-72 VALIANTFITS: 1971-72 SCAMP*2 door hardtop

1968-1976 DODGE DART / 1971-1976 SCAMP & 1968-1969 BARRACUDA FRONT WINDSHIELD MOLDING (2 door hardtop only)

NEW HEAVY GAUGE STAINLESS STEEL REPRODUCTION 5 PIECE KIT.FITS: 1968-76 DODGE DART & SWINGERFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA ALL*can also be used on 1967 dart & barracuda, but must add 1968-up style clips and screw in studs

1967-1976 PLYMOUTH A-BODY COMPLETE FLOOR

SHIPS TRUCK FREIGHTOE style coverage like original. Mates to all adjacent panels with OE dimensions. Comes with fasteners and brackets for speedometer cable, emergency brake cable, seat belts and rear seat retainers. You will also need rear floor pans...

1967-76 DODGE & PLYMOUTH A-BODY UNDER REAR SEAT FLOOR PAN

SHIPS TRUCK FREIGHTFits under rear seat area, over the top of the axle housing and connects to the rear of the trunk floor pan. Includes emergency brake, rear seat, rear seat belt, exhaust hanger and pinion snubber brackets welded into place where...

RH / 1967-1976 PLYMOUTH A-BODY LONG FLOOR PAN

FITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT FITS: 1967-71 PLYMOUTH VALIANT

LH / 1967-1976 PLYMOUTH A-BODY LONG FLOOR PAN

FITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT FITS: 1967-71 PLYMOUTH VALIANT

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1967-74 DODGE & PLYMOUTH A-BODY / 1966-70 B-BODY & 1970-74 E-BODY DOOR HINGE REBUILD KIT

INCLUDES: 1 pin 3 1/2 INCHES LONG, 1 pin 2 1/2 INCHES LONG AND 4 STANDARD BUSHINGS.FITS: 1967-74 A-BODYFITS: 1966-70 B-BODYFITS: 1970-74 E-BODY*mopars did not come with bushings so some drilling may be required for installation.

1969-70 CHARGER & 1969 BARRACUDA FLIP UP GAS CAP

FLIP-TOP FUEL CAP. NOT A CONCOURS PART DUE TO SMALL SURFACE IMPERFECTIONS ON THE FINISH. CHROME-PLATED WITH A BLACK PAINTED TOP WITH "FUEL" LETTERING. INNER SEAL INCLUDED.FITS: 1969-70 CHARGERFITS: 1969 BARRACUDA

1968 CHARGER / 1967 GTX & 1967-1968 BARRACUDA FLIP UP GAS CAP

FLIP-TOP FUEL CAP. THIS IS A QUALITY REPLACEMENT CAP BUT NOT CONCOURS DUE TO MINOR IMPERFECTIONS IN THE TOOLING. PLAIN BRUSHED FINISH WITH NO LETTERING. INNER SEAL INCLUDED.FITS: 1968 DODGE CHARGERFITS: 1967 GTXFITS: 1967-1968 BARRACUDA

1967-76 DODGE & PLYMOUTH A-BODY BATTERY TRAY

REPRODUCTION BATTERY TRAY.FITS: 1967-76 DART & SWINGERFITS: 1973-76 DART SPORTFITS: 1971-72 DEMONFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1970-76 VALIANTFITS: 1971-76 PLYMOUTH SCAMP

1967-69 BARRACUDA NOTCHBACK REAR WINDOW GASKET

NEW REPRODUCTION GASKET ACCEPTS TRIMFITS: 1967-69 BARRACUDA*can be used on 1967 models if later model reveal molding and clips are used****lockstrip included

1968-1969 BARRACUDA FASTBACK REAR WINDOW GASKET

NEW REPRODUCTION GASKET ACCEPTS ORIGINAL TRIM.FITS: 1968-1969 BARRACUDA FASTBACK MODELS

1967 DART & 1967 BARRACUDA FRONT WINDSHEILD REVEAL MOLDING SET (8 piece set)

NEW CORRECT 8 PIECE MYLAR CHROME LOCKING STRIP FOR THE 1967 CAR OWNERS THAT WANT TO KEEP ALL ORIGINAL.THIS CHROME LOCK STRIP CAN ONLY BE USED WITH GASKET MP-1404A.FITS: 1967 BARRACUDA (fastback & notchback)FITS: 1967 DART (2 door hardtop)*will not fit...

1967 DART & 1967 BARRACUDA FRONT WINDSHIELD GASKET

NEW CORRECT GASKET THE 1967 CAR OWNERS THAT WANT TO KEEP ALL ORIGINAL. THIS GASKET REQUIRES THE CHROME MYLAR LOCKING STRIP KIT, MP-1404B.FITS: 1967 BARRACUDA (fastback & notchback)FITS: 1967 DART (2 door hardtop)*will not fit convertible

1968-76 DART / 1971-76 SCAMP & 1968-69 BARRACUDA FRONT WINDSHIELD GASKET (2 door hardtop)

NEW REPRODUCTION GASKET ACCEPTS ORIGINAL AND REPRODUCTION REVEAL MOLDINGS.FITS: 1968-76 DARTFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA (fastback & notchback)FITS: 1971-75 VALIANT*2 door hardtop without post between the door glass and quarter...

1968-69 BARRACUDA & DART CONVERTIBLE WINDSHIELD GASKET

THIS NEW RUBBER GASKET IS DESIGNED TO ACCEPT ORIGINAL AND REPRODUCTION REVEAL MOLDING.FITS: 1968-69 DARTFITS: 1968-69 BARRACUDA* 1967 models used reveal moldings that snap into the gasket. this gasket can be used on 1967 models if the later reveal...

RH / 1969 BARRACUDA REAR QUARTER SKIN

SHIPS TRUCK FREIGHT30 IN. HIGH X 79 IN. LONG*fastback, coupe & convertible

LH / 1969 BARRACUDA REAR QUARTER SKIN

SHIPS TRUCK FREIGHT30 IN. HIGH X 79 IN. LONG*fastback, coupe & convertible

RH / 1968 BARRACUDA REAR QUARTER PANEL SKIN

SHIPS TRUCK FREIGHT30 IN. HIGH X 79 IN. LONG*fastback, coupe & convertible

LH / 1968 BARRACUDA REAR QUARTER PANEL SKIN

SHIPS TRUCK FREIGHT30 IN. HIGH X 79 IN. LONG*fastback, coupe & convertible

RH / 1967 BARRACUDA REAR QUARTER PANEL SKIN

SHIPS TRUCK FREIGHT30 IN. HIGH X 79 IN. LONG*fastback, coupe & convertible

LH / 1967 BARRACUDA REAR QUARTER PANEL SKIN

SHIPS TRUCK FREIGHT30 IN. HIGH X 79 IN. LONG*fastback, coupe & convertible

1967-1969 BARRACUDA STEEL REAR VALANCE (dual exhaust)

Welds in place like original. Will fit 1967 models. Back up light holes must be cut for 1967 and 1969 models.FITS: 1967-1969 BARRACUDA

RH / 1967-1969 BARRACUDA TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

LH / 1967-1969 BARRACUDA TRUNK FLOOR EXTENSION

TRUNK FLOOR EXTENSIONS ALSO KNOWN AS DROP-OFFS ARE THE STEEL PANELS THAT FILL BETWEEN THE SIDE OF THE TRUNK FLOOR AND THE LOWER REAR BOTTOM OF THE QUARTER PANEL.THESE ARE COMMONLY RUSTED OUT, ESPECIALLY WHEN WATER LEAKED INTO THE TRUNK FROM THE BACK...

1967-1969 BARRACUDA COUPE NOTCHBACK DRIP RAIL MOLDING SET

NEW REPRODUCTION STAINLESS STEEL (like original) 6 PIECE SET FOR THE UPPER DRIP RAIL AND FRONT LOWER A-PILLAR. FITS VINYL & NON-VINYL TOPS.FITS: 1967-69 BARRACUDA 2 DOOR COUPE AND NOTCHBACK

1967-1969 BARRACUDA STEEL REAR VALANCE (single exhaust)

Welds in place like original. Will fit 1967 models. Back up light holes must be cut for 1967 and 1969 models.FITS: 1967-1969 BARRACUDA

RH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

LH / 1967-76 DODGE & PLYMOUTH A-BODY LOWER DOOR HINGE PILLAR

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

RH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

LH / 1967-76 MOPAR A-BODY FRONT OF ROCKER END CAP

These small parts take a real beating from road debris, rain and snow. If you are replacing a rocker panel or have rust in the lower fender area you'll need these pieces.FITS: 1967-76 DARTFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1970-76...

RH / 1967-76 DODGE & PLYMOUTH A-BODY REAR LEAF SPRING MOUNT

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

LH / 1967-76 DODGE & PLYMOUTH A-BODY REAR LEAF SPRING MOUNT

FITS: 1967-69 BARRACUDAFITS: 1967-76 DARTFITS: 1973-76 DART SPORT FITS: 1971-76 SCAMP FITS: 1970-76 DUSTERFITS: 1971-72 DEMON

RH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT SPRING PERCH

NEW HEAVY GAUGE EDP COATED REPRODUCTION AS ORIGINALFITS: 1967-76 DARTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

LH / 1967-76 DODGE & PLYMOUTH A-BODY FRONT SPRING PERCH

NEW HEAVY GAUGE EDP COATED REPRODUCTION AS ORIGINALFITS: 1967-76 DARTFITS: 1971-76 SCAMPFITS: 1967-69 BARRACUDAFITS: 1970-76 DUSTERFITS: 1971-72 DEMONFITS: 1973-76 DART SPORT

DODGE & PLYMOUTH ANTENNA GASKET-EACH

APPLICATIONS:67-74 Dodge Dart, 64 330, Polara, 440, 65-70 Charger, 68 Super Bee, 69 Daytona, 70-74 Challenger, 71-74 Swinger, 67-74 Plymouth Valiant, Barracuda, 64 Fury, 65-70- Bevedere, Satellite, 67-70 Gtx, 68-70 Road Runner, 70-74 Duster, Cuda, 71-74...

1966-72 DODGE & PLYMOUTH A / B-BODY QUARTER WINDOW SEAL (pair)

FITS: 1967-69 BARRACUDA (convertible)FITS: 1967-72 DART / SWINGER / SCAMP (2 door hardtop & convertible)FITS: 1966-67 CHARGERFITS: 1966-67 BELVEDERE / SATELLITE / GTX (convertible)FITS: 1968-70 B-BODY (convertible)

MOPAR DOOR AND TRUNK LOCK GASKET SET-3 PCS

APPLICATIONS:66-70 Dodge Dart, 66-70 Plymouth Valiant, 66-69 Barracuda, 70 Duster 70-74 E Body

1967-76 DODGE & PLYMOUTH BUMPER BOLT SET (8 bolts)

Don't ruin the look of your restoration by trying to reuse old, rusted hardware that not only looks bad, but could also be a safety hazard. ABS bumper mounting bolts are precision-manufactured from steel with a stainless steel cap.*8 Bolts, 8 Flat...

1967-72 DODGE & PLYMOUTH A-BODY DOOR WEATHERSTRIP

CORRECT CLIPS & ONE MOLDED END WITH STEEL CORE. LH & RHFITS: 1967-72 DARTFITS: 1971-72 DEMONFITS: 1970-72 DUSTERFITS: 1971-72 SCAMPFITS: 1967-69 BARRACUDAFITS: 1967-72 VALIANT*for 2 door models with roll down quarter glass and pop-out models

1968-76 DART SWINGER / 1971-76 SCAMP & 1968-69 BARRACUDA FRONT WINDSHIELD CLIP SET

REPRODUCTION CLIPS FOR ATTACHING THE MOLDINGS THAT SURROUND THE FRONT WINDSHIELD. 23PCS SCREWS INCLUDEDFITS: 1968-76 DODGE DART & SWINGERFITS: 1971-76 PLYMOUTH SCAMPFITS: 1968-69 BARRACUDA ALL*2 door hardtop & 2 /4 door sedan

DODGE & PLYMOUTH GAS TANK GROMMET-SEE NOTES FOR FIT

(tank to fill tube)NOT INCLUDED WITH OUR GAS TANKS, THIS GROMMET IS NECESSARY WHENREPLACING YOUR GAS TANK.FITS: 1967-76 A-BODYFITS: 1966-69 B-BODY (except 1970 b-body)FITS: 1971-74 B-BODYFITS: 1965-74 C-BODY(will work for 1963-65 b-body)

1963-76 DODGE & PLYMOUTH A-BODY 3/8" FUEL SENDING UNIT (w/ return line)

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel pump sender assemblies meet or exceed the performance of the original equipment they replace.FITS: 1964-69 BARRACUDA FITS: 1963-76 DARTFITS: 1971-76...

1967-69 DODGE & PLYMOUTH A-BODY FUEL FILLER TO TRUNK FLOOR SEAL

NEW CORRECT REPRODUCTION OF THE SEAL USED TO FILL AROUND THE FILLER NECK AT THE BASE OF THE TRUNK FLOOR.FITS: 1967-69 BARRACUDAFITS: 1967-69 DARTFITS: 1967-69 VALIANT

1968-70 DODGE & PLYMOUTH A-BODY GAS TANK W/O EEC

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1967-76 DODGE & PLYMOUTH A-BODY REAR OF HOOD TO COWL SEAL

NEW MOLDED REPRODUCTION WITH CLIPS. 34 IN. LONG. THIS IS THE RUBBER PIECE WHICH SEALS THE UNDERSIDE OF THE HOOD TO REAR COWL.FITS: 1967-76 DART & SWINGERFITS: 1971-76 SCAMPFITS: 1970-76 DUSTERFITS: 1973-76 DART SPORTFITS: 1967-69 BARRACUDAFITS: 1971-72...

1967-69 BARRACUDA FASTBACK QUARTER WINDOW SEALS (sold as a pair)

THIS SEAL ATTACHES TO THE CHROME INSERT ON THE BACK EDGE OF THE FRONT DOOR GLASS. SEALS THE GAP BETWEEN THE ROLL DOWN QUARTER GLASS TO THE FRONT DOOR GLASS.FITS: 1967-69 BARRACUDA FASTBACK

1967-69 DODGE & PLYMOUTH A-BODY BODY PLUG KIT

KITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR.FITS: 1967-69...

1967-70 DODGE & PLYMOUTH A-BODY BODY BUMPER KIT

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1967-72 MOPAR A-BODY JACK BRACKET-3 PIECE SET

NEW DETAILED REPRODUCTION OF THE ORIGINAL FOR HARDTOP & CONVERTIBLESFITS: 1967-72 DART (except dart sport)FITS: 1967-69 BARRACUDAFITS: 1971 SCAMP