1968-1970

1968-1970 DODGE & PLYMOUTH B-BODY VENT WINDOW SEALS (sold as a pair)

ALSO KNOWN AS WING WINDOW SEALS FOR ALL 2 DOOR MODELS. LH & RH (pair)FITS: 1968-70 CHARGERFITS: 1968-70 CORONETFITS: 1968-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

1968-70 DODGE & PLYMOUTH B-BODY ROOFRAIL WEATHERSTRIP (2 door sedan)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1968-70 CORONET FITS: 1968-70 ROADRUNNER / SATELLITE / GTX / BELVEDERE*with center post

1968-70 DODGE & PLYMOUTH B-BODY ROOF RAIL WEATHERSTRIP (2 door hardtop)

THICK RUBBER SEAL WITH MOLDED ENDS. LH & RH (pair)FITS INTO THE ROOF RAIL AREA AND SEALS AGAINST THE TOP OF THE SIDE WINDOWS.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET & SUPERBEEFITS: 1968-70 ROADRUNNER / SATELLITE / GTX / BELVEDERE*without center post

1968-70 DODGE & PLYMOUTH B-BODY DOOR WEATHERSTRIP (pair)

SOLD AS A PAIR WITH CLIPS AND MOLDED ENDS.FITS: 1968-70 ROADRUNNER / SATELLITE / GTX / BELVEDEREFITS: 1968-70 CHARGERFITS: 1968-70 CORONET*2 door hardtop, sedan & convertible

1968-70 PLYMOUTH B-BODY TRUNK BUMPER SET

SOLD AS A 2 PIECE SET.15/16 IN. WIDE X 5/8 IN. HIGHFITS: 1968-70 ROADRUNNER-SATELLITE-GTX

1963-1976 DODGE & PLYMOUTH A,B, & E-BODY TRUNK WEATHERSTRIP GASKET

THIS TRUNK SEAL WILL FIT ALL DODGE & PLYMOUTH A,B, & E-BODY MODELS FROM 1964-1976. INSTALL USING 3M BLACK WEATHERSTRIP ADHESIVE.16 FEET LONG (trim to fit)

1968 DODGE & PLYMOUTH B-BODY TRUNK BUMPER SET (except charger)

SOLD AS A 2 PIECE SET.7/8 IN. ROUND X 3/4 IN. HIGHFITS: 1968 CORONET & SUPERBEEFITS: 1968 ROADRUNNER-SATELLITE-GTX(except charger)

1970-1972 DODGE & PLYMOUTH B-BODY & 1970-1974 E-BODY BATTERY TRAY

FITS: 1970-74 BARRACUDA FITS: 1970-74 CHALLENGERFITS: 1970-72 CHARGERFITS: 1970-72 ROADRUNNER-SATELLITE-GTX-BELVEDEREFITS: 1970-72 CORONET

1967-74 DODGE & PLYMOUTH A-BODY / 1966-70 B-BODY & 1970-74 E-BODY DOOR HINGE REBUILD KIT

INCLUDES: 1 pin 3 1/2 INCHES LONG, 1 pin 2 1/2 INCHES LONG AND 4 STANDARD BUSHINGS.FITS: 1967-74 A-BODYFITS: 1966-70 B-BODYFITS: 1970-74 E-BODY*mopars did not come with bushings so some drilling may be required for installation.

1970 PLYMOUTH B-BODY AIR GRABBER HOOD SCOOP (included with air grabber hood)

FITS: 1970 ROADRUNNER / SATELLITE / GTX / BELVEDERE

1970 PLYMOUTH B-BODY FRESH AIR HOOD (drill holes for pin down)

SHIPS TRUCK FREIGHT(includes air grabber door)

1970 PLYMOUTH B-BODY STANDARD STEEL HOOD (with pin holes)

SHIPS TRUCK FREIGHTFITS: 1970 ROADRUNNER / SATELLITE / GTX / BELVEDERE

1970 PLYMOUTH B-BODY STANDARD STEEL HOOD (without pin holes)

SHIPS TRUCK FREIGHTFITS: 1970 ROADRUNNER / SATELLITE / GTX / BELVEDERE

1970 PLYMOUTH B-BODY TAIL LIGHT PANEL

Complete OE style coverage. Holes for Plymouth letters are drilled for ease of installation.FITS: 1970 ROADRUNNER / SATELLITE / GTX / BELVEDERE /SUPERBIRD

1968-70 PLYMOUTH B-BODY COMPLETE DRIP RAIL MOLDING SET

NEW STAINLESS STEEL 8 PIECE KIT, LIKE ORIGINAL FOR MODELS WITHOUT VINYL TOP..FITS: 1968-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE(except convertible)

1968-70 PLYMOUTH B-BODY VINYL TOP MOLDING SET (2 piece set)

NEW HEAVY GAUGE STAINLESS STEEL REPRODUCTION 2 PIECE KIT.FITS: 1968-70 ROARUNNER / GTX / SATELLITE / BELVEDERE*2 door hardtop & 2 door sedan

1968-69 PLYMOUTH B-BODY LOWER GRILLE PANEL

Auto Metal Direct offers replacement header panels for many classic applications. These quality reproductions are constructed from EDP coated steel and are a direct replacement for the factory pieces. Don't take chances at some junkyard with your...

RH / 1966-1970 DODGE & PLYMOUTH B-BODY OUTER LOWER DOOR HINGE PILLAR

DIE FORMED & EDP COATEDREPAIRS UPPER & LOWER DOOR HINGE LOCATIONS.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET & SUPERBEEFITS: 1968-70 ROADRUNNER-GTX-SATELLITE

LH / 1968-1970 DODGE & PLYMOUTH B-BODY OUTER LOWER DOOR HINGE PILLAR

DIE FORMED & EDP COATEDREPAIRS UPPER & LOWER DOOR HINGE LOCATIONS.FITS: 1968-70 CHARGERFITS: 1968-70 CORONET & SUPERBEEFITS: 1968-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

RH / 1966-1970 DODGE & PLYMOUTH B-BODY INNER COWL SIDE PANEL

DIE FORMED AND EDP COATEDLOCATED BEHIND THE DOOR HINGE POST AND THE OUTER COWL.FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

LH / 1966-1970 DODGE & PLYMOUTH B-BODY INNER COWL SIDE PANEL

DIE FORMED AND EDP COATEDLOCATED BEHIND THE DOOR HINGE POST AND THE OUTER COWL.FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

1966-1970 DODGE & PLYMOUTH B-BODY UPPER OUTER COWL PANEL

FITS: 1966-70 CHARGERFITS: 1966-70 CORONETFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

1966-1970 DODGE & PLYMOUTH B-BODY LOWER COWL PLENUM

FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER / GTX / SATELLITE / BELVEDERE

LH / 1969 PLYMOUTH B-BODY REAR QUARTER SKIN

SHIPS TRUCK FREIGHTAMD quarter panel skins are the highest quality on the market. They are cut from our full OE style panels so they extend to all mating surfaces including door jamb, wheel house and tail light/valance panel area. Top edge of panel bends...

RH / 1968 PLYMOUTH B-BODY REAR QUARTER SKIN

SHIPS TRUCK FREIGHTAMD quarter panel skins are the highest quality on the market. They are cut from our full OE style panels so they extend to all mating surfaces including door jamb, wheel house and tail light/valance panel area. Top edge of panel bends...

LH / 1968 PLYMOUTH B-BODY REAR QUARTER SKIN

SHIPS TRUCK FREIGHTAMD quarter panel skins are the highest quality on the market. They are cut from our full OE style panels so they extend to all mating surfaces including door jamb, wheel house and tail light/valance panel area. Top edge of panel bends...

RH / 1968-1970 PLYMOUTH B-BODY FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 12 IN. HIGHFITS: ROADRUNNER / SATELLITE / GTX / BELVEDERE

LH / 1968-1970 PLYMOUTH B-BODY FRONT FENDER-LOWER REAR SECTION (includes brace)

DIE STAMPED STEEL PATCH FOR THE LOWER REAR SECTION OF THE FRONT FENDER WHERE IT COMMONLY RUSTS OUT. INCLUDES LOWER BRACE DETACHED. 12 IN. HIGHFITS: ROADRUNNER / SATELLITE / GTX / BELVEDERE

RH / 1968-70 PLYMOUTH B-BODY REAR OUTER WHEELHOUSE

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1968-70 ROADRUNNER / SATELLITE / GTX /...

LH / 1968-70 PLYMOUTH B-BODY REAR OUTER WHEELHOUSE

The odds are high your wheelhouses will need repair if your quarter panels contain rust. Our OE style wheelhouses are direct replacements of the originals and feature correct as original tabs, holes and bends.FITS: 1968-70 ROADRUNNER / SATELLITE / GTX /...

1966-72 DODGE & PLYMOUTH A / B-BODY QUARTER WINDOW SEAL (pair)

FITS: 1967-69 BARRACUDA (convertible)FITS: 1967-72 DART / SWINGER / SCAMP (2 door hardtop & convertible)FITS: 1966-67 CHARGERFITS: 1966-67 BELVEDERE / SATELLITE / GTX (convertible)FITS: 1968-70 B-BODY (convertible)

DODGE & PLYMOUTH DOOR HANDLE GASKETS (4 piece set)

FITS: 1966-70 CHARGERFITS: 1966-70 CORONET & SUPERBEEFITS: 1966-70 ROADRUNNER/ GTX / SATELLITE / BELVEDEREFITS: 1967-70 DART & SWINGERFITS: 1967-69 BARRACUDAFITS: 1970 DUSTER

1967-76 DODGE & PLYMOUTH BUMPER BOLT SET (8 bolts)

Don't ruin the look of your restoration by trying to reuse old, rusted hardware that not only looks bad, but could also be a safety hazard. ABS bumper mounting bolts are precision-manufactured from steel with a stainless steel cap.*8 Bolts, 8 Flat...

1968-70 DODGE & PLYMOUTH B-BODY FRONT WINDSHIELD CLIP SET

REPRODUCTION CLIPS FOR ATTACHING THE MOLDINGS THAT SURROUND THE FRONT WINDSHIELD. 24PCS SCREWS INCLUDEDFITS: 1968-70 CHARGERFITS: 1968-70 CORONETFITS: 1968-70 ROADRUNNER / SATELLITE / GTX / BELVEDERE*2 door hardtop & 2 door sedan

DODGE & PLYMOUTH GAS TANK GROMMET-SEE NOTES FOR FIT

(tank to fill tube)NOT INCLUDED WITH OUR GAS TANKS, THIS GROMMET IS NECESSARY WHENREPLACING YOUR GAS TANK.FITS: 1967-76 A-BODYFITS: 1966-69 B-BODY (except 1970 b-body)FITS: 1971-74 B-BODYFITS: 1965-74 C-BODY(will work for 1963-65 b-body)

DODGE & PLYMOUTH E-BODY & 70 B-BODY GAS TANK GROMMET

(tank to fill tube)NOT INCLUDED WITH OUR GAS TANKS, THIS GROMMET IS NECESSARY WHEN REPLACING YOUR GAS TANK.FITS: 1970-74 BARRACUDAFITS: 1970-74 CHALLENGERFITS: 1970 B-BODY

1970 DODGE & PLYMOUTH B-BODY GAS TANK 4 SIDE VENT PIPE WITH EMMISIONS (except charger)

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1968-70 DODGE & PLYMOUTH B-BODY GAS TANK WITH 2 FRONT VENT PIPES WITH EMMISIONS (except charger)

BEST QUALITY REPRODUCTION INCLUDES LOCK RING & GASKETThe Spectra Steel OE Replacement Fuel Tank is crafted from rust resistant steel that is lead/tin plated inside and out. The strong, electrically welded seams are reinforced and each tank is...

1968-70 DODGE & PLYMOUTH B-BODY WINDSHIELD GASKET (except convertible)

Windshield seal fits the 2 door hardtop and sedan models. This gasket works with original & reproduction chrome trim. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish. FITS: 1968-70...

1968-70 DODGE & PLYMOUTH B-BODY QUARTER WINDOW SEALS (pair)

FITS: 1968-70 CHARGERFITS: 1968-70 CORONETFITS: 1968-70 ROADRUNNER / BELVEDERE / SATELLITE / GTX*2 door hardtop

1970 DODGE & PLYMOUTH MOPAR B-BODY PLUG KIT

KITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR.FITS: 1970 CHARGERFITS:...

1969 DODGE & PLYMOUTH MOPAR B-BODY PLUG KIT

KITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR.FITS: 1969 CHARGERFITS:...

1968 DODGE & PLYMOUTH B-BODY PLUG KIT

KITS CONTAINS THE CORRECT SIZE AND STYLE PLUGS IN PLASTIC AND RUBBER AS FOUND IN THE FLOOR PANS, UNDER SEATS, TRUNK FLOOR, TRUNK FLOOR EXTENSIONS, AND FIREWALL. MOST PLUGS HAVE THE CHRYSLER PART NUMBER. COMPLETE KIT FOR ONE CAR.FITS: 1968 CHARGERFITS:...

1970 PLYMOUTH B-BODY BUMPER KIT

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1968-69 PLYMOUTH B-BODY BUMPER KIT

EACH BODY BUMPER KIT CONTAINS THE CORRECT NUMBER AND SHAPE OF BUMPERS FOR THE LICENSE PLATE, GLOVE BOX, ASH TRAY, AND FUEL DOOR, AS WELL AS HOOD, DOOR, & TRUNK. THIS KIT HAS BEEN RESEARCHED AND COMPARED TO ORIGINALS, NO SUBSTITUTIONS. THREADED HOOD...

1970 PLYMOUTH B-BODY TRUNK WEATHERSTRIP GUTTER SET

NEW HEAVY GAUGE REPRODUCTION OF THE ORIGINAL. 4 PIECE SET INCLUDES UPPER AND LOWER GUTTERSFITS: 1970 ROADRUNNER / GTX / SATELLITE / BELVEDERE

RH / 1970 PLYMOUTH B-BODY LOWER TRUNK WEATHERSTRIP GUTTER

NEW HEAVY GAUGE REPRODUCTION OF THE ORIGINALFITS: 1970 ROADRUNNER / GTX / SATELLITE / BELVEDERE

LH / 1970 PLYMOUTH B-BODY LOWER TRUNK WEATHERSTRIP GUTTER

NEW HEAVY GAUGE REPRODUCTION OF THE ORIGINALFITS: 1970 ROADRUNNER / GTX / SATELLITE / BELVEDERE

1968-70 DODGE & PLYMOUTH B-BODY JACK BRACKET (except charger)

NEW CORRECT BRACKET AND WING NUT.FITS: 1968-70 CORONETFITS: 1968-70 ROADRUNNER / SATELLITE/ GTX / BELVEDERE

RH / 1968-70 PLYMOUTH B-BODY SEDAN QUARTER GLASS-TINTED

FITS: 1968-70 ROADRUNNER / SATELLITE / GTX / BELVEDERE*2 door sedan / post car

LH / 1968-70 PLYMOUTH B-BODY SEDAN QUARTER GLASS-TINTED

FITS: 1968-70 ROADRUNNER / SATELLITE / GTX / BELVEDERE*2 door sedan / post car

RH / 1968-70 DODGE & PLYMOUTH B-BODY HARDTOP QUARTER GLASS-TINTED

FITS: 1968-70 CHARGERFITS: 1968-70 ROADRUNNER / SATELLITE / GTX / BELVEDEREFITS: 1968-70 CORONET*2 door hardtop